Yb-doped large mode area tapered fiber with depressed cladding and dopant confinement

A polarization-maintaining Yb-doped large mode area fiber with depressed-index inner cladding layer and confinement of rare-earth dopants has been drawn as a long tapered fiber. The larger end features a core/clad diameter of 56/400 μm and core NA ~ 0.07, thus leading to an effective mode area over 1000 μm2. The fiber was tested up to 100 W average power, with near diffraction-limited output as the beam quality M2 was measured < 1.2. As effective single-mode guidance is enforced in the first section due to enhanced bending loss, subsequent adiabatic transition of the mode field in the taper section preserves single-mode amplification towards the larger end of the fiber.

[1]  Konstantin Golant,et al.  Principles and performance of tapered fiber lasers: from uniform to flared geometry. , 2012, Applied optics.

[2]  R. Beach,et al.  Analysis of the scalability of diffraction-limited fiber lasers and amplifiers to high average power. , 2008, Optics express.

[3]  J W Nicholson,et al.  Spatially and spectrally resolved imaging of modal content in large-mode-area fibers. , 2008, Optics express.

[4]  Govind P. Agrawal,et al.  Nonlinear Fiber Optics , 1989 .

[5]  O. Okhotnikov,et al.  Double clad tapered fiber for high power applications. , 2008, Optics express.

[6]  Govind P. Agrawal,et al.  Self-Phase Modulation , 1995 .

[7]  Yuri Chamorovskiy,et al.  Mode evolution in long tapered fibers with high tapering ratio. , 2012, Optics express.

[8]  Louis Desbiens,et al.  Yb-doped large mode area fibers with depressed clad and dopant confinement , 2016, LASE.

[9]  J. Fini.  Bend-resistant design of conventional and microstructure fibers with very large mode area. , 2006, Optics express.

[10]  Jose Alfredo Alvarez-Chavez,et al.  High-power fibre lasers , 2003 .

[11]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[12]  Pierre Laperle,et al.  Yb-doped LMA triple-clad fiber for power amplifiers , 2007, SPIE LASE.

[13]  Mathieu Drolet,et al.  Relations between phosphorus/aluminum concentration ratio and photodarkening rate and loss in Yb-doped silica fibers , 2010, LASE.

[14]  Cesar Jauregui,et al.  Designing advanced very-large-mode-area fibers for power scaling of fiber-laser systems , 2014 .