High performance lithium-sulfur batteries with a facile and effective dual functional separator

Abstract Lithium-sulfur (Li-S) batteries stand as an important candidate for next-generation high-energy secondary batteries due to its high specific capacity, low cost and environmental friendliness. However, practical application of Li-S batteries suffers from low rechargeability, poor rate capability and cycling instability of sulfur cathode, which can be mainly ascribed to the poor conductivity of sulfur and the dissolution of the intermediate polysulfides generated during discharge-charge cycles. In this work, a Nafion/super P-modified dual functional separator is designed to improve the long-term cycle stability and rate capability of the pure sulfur cathode. The electrostatic repulsion between the SO 3 − groups and the dissolved negative S n 2− ions, and the trap and reutilizing effect of super P for polysulfides, provide double insurance to confine the polysulfides within the cathode side, leading to great improvement in both reversible capacity and cycling stability of the sulfur cathode as compared to the battery with pristine Celgard separator. With such dual functional separator, a simple elemental sulfur cathode with 70% S content delivers a high initial discharge capacity of 1087 mAh g −1 at 0.1C and a long-term cyclability with only 0.22% capacity fade per cycle over 250 cycles at 0.5C.

[1]  Guangyuan Zheng,et al.  Amphiphilic surface modification of hollow carbon nanofibers for improved cycle life of lithium sulfur batteries. , 2013, Nano letters.

[2]  A. Manthiram,et al.  Polymer lithium–sulfur batteries with a Nafion membrane and an advanced sulfur electrode , 2015 .

[3]  X. Lou,et al.  Double-Shelled Nanocages with Cobalt Hydroxide Inner Shell and Layered Double Hydroxides Outer Shell as High-Efficiency Polysulfide Mediator for Lithium-Sulfur Batteries. , 2016, Angewandte Chemie.

[4]  Xiao Liang,et al.  A highly efficient polysulfide mediator for lithium–sulfur batteries , 2015, Nature Communications.

[5]  Shizhao Xiong,et al.  Properties of surface film on lithium anode with LiNO3 as lithium salt in electrolyte solution for lithium–sulfur batteries , 2012 .

[6]  X. Duan,et al.  Three-dimensional graphene framework with ultra-high sulfur content for a robust lithium–sulfur battery , 2016, Nano Research.

[7]  Zhichuan J. Xu,et al.  Encapsulating MWNTs into Hollow Porous Carbon Nanotubes: A Tube‐in‐Tube Carbon Nanostructure for High‐Performance Lithium‐Sulfur Batteries , 2014, Advanced materials.

[8]  Rong Xu,et al.  Embedding sulfur in MOF-derived microporous carbon polyhedrons for lithium-sulfur batteries. , 2013, Chemistry.

[9]  Ruoxu Lin,et al.  Hollow spherical carbonized polypyrrole/sulfur composite cathode materials for lithium/sulfur cells with long cycle life , 2014 .

[10]  Xiao Liang,et al.  Sulfur cathodes based on conductive MXene nanosheets for high-performance lithium-sulfur batteries. , 2015, Angewandte Chemie.

[11]  Guohua Chen,et al.  Fabrication of High Conductive S/C Cathode by Sulfur Infiltration into Hierarchical Porous Carbon/Carbon Fiber Weave-Structured Materials via Vapor-Melting Method , 2014 .

[12]  X. Lou,et al.  Pie-like electrode design for high-energy density lithium–sulfur batteries , 2015, Nature Communications.

[13]  Leon L. Shaw,et al.  Recent advances in lithium–sulfur batteries , 2014 .

[14]  Dipan Kundu,et al.  Surface-enhanced redox chemistry of polysulphides on a metallic and polar host for lithium-sulphur batteries , 2014, Nature Communications.

[15]  Kai Xie,et al.  Application of lithiated Nafion ionomer film as functional separator for lithium sulfur cells , 2012 .

[16]  Guang He,et al.  Tailoring porosity in carbon nanospheres for lithium-sulfur battery cathodes. , 2013, ACS nano.

[17]  Pu Chen,et al.  Synthesis of Hierarchical Porous Sulfur/Polypyrrole/Multiwalled Carbon Nanotube Composite Cathode for Lithium Batteries , 2014 .

[18]  Patrik Johansson,et al.  A review of electrolytes for lithium–sulphur batteries , 2014 .

[19]  Jinpeng Han,et al.  Sulfur embedded in metal organic framework-derived hierarchically porous carbon nanoplates for high performance lithium–sulfur battery , 2013 .

[20]  Yi Cui,et al.  Strong sulfur binding with conducting Magnéli-phase Ti(n)O2(n-1) nanomaterials for improving lithium-sulfur batteries. , 2014, Nano letters.

[21]  Weihan Li,et al.  Free-standing porous carbon nanofibers-sulfur composite for flexible Li-S battery cathode. , 2014, Nanoscale.

[22]  Jung-Ki Park,et al.  Perfluorinated ionomer-enveloped sulfur cathodes for lithium-sulfur batteries. , 2014, ChemSusChem.

[23]  Hong‐Jie Peng,et al.  Rational Integration of Polypropylene/Graphene Oxide/Nafion as Ternary-Layered Separator to Retard the Shuttle of Polysulfides for Lithium-Sulfur Batteries. , 2016, Small.

[24]  Jiaqi Huang,et al.  Multi-functional separator/interlayer system for high-stable lithium-sulfur batteries: Progress and prospects , 2015 .

[25]  Li Wang,et al.  Nafion coated sulfur–carbon electrode for high performance lithium–sulfur batteries , 2014 .

[26]  Xiao Xing Liang,et al.  Improved cycling performances of lithium sulfur batteries with LiNO 3-modified electrolyte , 2011 .

[27]  Wang Wenjun,et al.  Reduced graphene oxide with ultrahigh conductivity as carbon coating layer for high performance sulfur@reduced graphene oxide cathode , 2014 .

[28]  Yutao Li,et al.  A chemistry and material perspective on lithium redox flow batteries towards high-density electrical energy storage. , 2015, Chemical Society reviews.

[29]  X. Lou,et al.  Hollow Carbon Nanofibers Filled with MnO2 Nanosheets as Efficient Sulfur Hosts for Lithium-Sulfur Batteries. , 2015, Angewandte Chemie.

[30]  Hong‐Jie Peng,et al.  Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries , 2014 .

[31]  Yang Liu,et al.  A highly ordered meso@microporous carbon-supported sulfur@smaller sulfur core-shell structured cathode for Li-S batteries. , 2014, ACS nano.

[32]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[33]  Enhanced Cycling Stability of Sulfur Cathode Surface-Modified by Poly(N-methylpyrrole) , 2014 .

[34]  X. Lou,et al.  Enhancing lithium–sulphur battery performance by strongly binding the discharge products on amino-functionalized reduced graphene oxide , 2014, Nature Communications.

[35]  Shengdi Zhang.  Role of LiNO3 in rechargeable lithium/sulfur battery , 2012 .

[36]  Michel Armand,et al.  A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries , 2013, Nature Communications.

[37]  Shengping Wang,et al.  Mesoporous β-MnO2/sulfur composite as cathode material for Li–S batteries , 2013 .

[38]  Arumugam Manthiram,et al.  Rechargeable lithium-sulfur batteries. , 2014, Chemical reviews.

[39]  H. Byon,et al.  In Situ Synthesis of Bipyramidal Sulfur with 3D Carbon Nanotube Framework for Lithium–Sulfur Batteries , 2014 .

[40]  Arumugam Manthiram,et al.  Lithium–Sulfur Batteries: Progress and Prospects , 2015, Advanced materials.

[41]  S. Yao,et al.  Separator modified by Ketjen black for enhanced electrochemical performance of lithium–sulfur batteries , 2016 .

[42]  Xin-Bing Cheng,et al.  Nitrogen‐Doped Aligned Carbon Nanotube/Graphene Sandwiches: Facile Catalytic Growth on Bifunctional Natural Catalysts and Their Applications as Scaffolds for High‐Rate Lithium‐Sulfur Batteries , 2014, Advanced materials.

[43]  H. Althues,et al.  Reduced polysulfide shuttle in lithium–sulfur batteries using Nafion-based separators , 2014 .

[44]  Ji‐Guang Zhang,et al.  Lewis acid-base interactions between polysulfides and metal organic framework in lithium sulfur batteries. , 2014, Nano letters.

[45]  Feng Li,et al.  A Flexible Sulfur‐Graphene‐Polypropylene Separator Integrated Electrode for Advanced Li–S Batteries , 2015, Advanced materials.

[46]  Zhian Zhang,et al.  Al2O3-coated porous separator for enhanced electrochemical performance of lithium sulfur batteries , 2014 .

[47]  Shengbo Zhang,et al.  Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte , 2012 .

[48]  Hiroshi Nagata,et al.  A lithium sulfur battery with high power density , 2014 .

[49]  Jun Zhang,et al.  Sulfur nanocrystals anchored graphene composite with highly improved electrochemical performance for lithium-sulfur batteries , 2014 .