Gravity effect on the performance of PEM fuel cell stack with different gas manifold positions

SUMMARY The importance of gravity effect on the performance of proton exchange membrane fuel cell (PEMFC) has recently been recognized. In this paper, the effect of gravity on the performance of PEMFC has been investigated associating with different gas intake modes. The polarization curves of the stack with different positions of reaction gas inlet and outlet at varied gravitational angles are addressed in detail. The results indicate that the output power of PEMFC stack can be greatly enhanced at the optimized gravitational angle. Gas intake modes that were realized by varying the gas inlet and outlet positions strongly affect the stack performance as well. The optimized performance can be reached at the tilted angle of 90° when both air and hydrogen inlets are placed at the upper side of the stack, whereas the worst performance occurs at the tilted angle of 90° when air and hydrogen flow into the channel from the bottom side of the stack. These results have important implications for PEM fuel cell design and operational strategies. In order to improve the performance, fuel cells should be designed and operated at the optimized gravitational angle and gas inlet/outlet position. Copyright © 2011 John Wiley & Sons, Ltd.

[1]  P. Sui,et al.  Dynamic behaviour of liquid water emerging from a GDL pore into a PEMFC gas flow channel , 2007 .

[2]  Frano Barbir,et al.  Status and development of PEM fuel cell technology , 2008 .

[3]  Y. M. Ferng,et al.  Analytical and experimental investigations of a proton exchange membrane fuel cell , 2004 .

[4]  Ayoub Kazim,et al.  Effects of cathode operating conditions on performance of a PEM fuel cell with interdigitated flow fields , 2003 .

[5]  Ned Djilali,et al.  A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell , 2003 .

[6]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[7]  Lijun Yu,et al.  Transport mechanisms and performance simulation of a PEM fuel cell , 2008 .

[8]  Wei-Mon Yan,et al.  Analysis of thermal and water management with temperature-dependent diffusion effects in membrane of proton exchange membrane fuel cells , 2004 .

[9]  Hongtan Liu,et al.  A 3D model for PEM fuel cells operated on reformate , 2004 .

[10]  Hubertus P.L.H. van Bussel,et al.  Dynamic model of solid polymer fuel cell water management , 1998 .

[11]  C. Furmidge,et al.  Studies at phase interfaces. I. The sliding of liquid drops on solid surfaces and a theory for spray retention , 1962 .

[12]  Feng-Yuan Zhang,et al.  Liquid Water Removal from a Polymer Electrolyte Fuel Cell , 2006 .

[13]  Hang Guo,et al.  2D analytical model of a direct methanol fuel cell , 2004 .

[14]  R. Winterton,et al.  Bubble diameter on detachment in flowing liquids , 1981 .

[15]  Seok-Min Lee,et al.  Metal membrane-type 25-kW methanol fuel processor for fuel-cell hybrid vehicle , 2002 .

[16]  Ronghuan He,et al.  Integration of high temperature PEM fuel cells with a methanol reformer , 2005 .

[17]  Xianguo Li,et al.  Modelling of polymer electrolyte membrane fuel cells with variable degrees of water flooding , 2000 .

[18]  J. Benziger,et al.  Effects of GDL Structure with an Efficient Approach to the Management of Liquid water in PEM Fuel Cells , 2010 .

[19]  R. E. Ford,et al.  Studies at phase interfaces , 1966 .

[20]  Yannis Kevrekidis,et al.  Drops, slugs, and flooding in polymer electrolyte membrane fuel cells , 2008 .

[21]  Ramana G. Reddy,et al.  Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells , 2003 .

[22]  Yuhou Wu,et al.  Gravity effect on water discharged in PEM fuel cell cathode , 2010 .

[23]  A. K. Banthia,et al.  Synthesis and characterization of polyvinyl alcohol copolymer/phosphomolybdic acid-based crosslinked composite polymer electrolyte membranes , 2008 .

[24]  K. S. Dhathathreyan,et al.  Water transport characteristics of polymer electrolyte membrane fuel cell , 2004 .

[25]  D. P. Wilkinson,et al.  Serpentine flow field design , 2010 .

[26]  R. Borup,et al.  Design and Testing Criteria for Bipolar Plate Materials for Pem Fuel Cell Applications , 1995 .

[27]  D. Quéré,et al.  Drops at Rest on a Tilted Plane , 1998 .

[28]  Li Jia,et al.  Effects of inlet humidification on PEM fuel cell dynamic behaviors , 2011 .

[29]  T. Nguyen,et al.  A liquid water management strategy for PEM fuel cell stacks , 2003 .

[30]  K. Kawasaki.  Study of wettability of polymers by sliding of water drop , 1960 .