Preparation, characterization and thermal properties of PMMA/n-heptadecane microcapsules as novel solid-liquid microPCM for thermal energy storage

[1]  M. Luh,et al.  Thermal degradation of polymethylmethacrylate. Energies of activation , 1968 .

[2]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[3]  David P. Colvin,et al.  Microencapsulated phase-change material suspensions for heat transfer in spacecraft thermal systems , 1996 .

[4]  N. Kayukawa,et al.  Characteristics of microencapsulated PCM slurry as a heat‐transfer fluid , 1999 .

[5]  Min Xiao,et al.  Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity , 2002 .

[6]  A. Bejan,et al.  Thermal Energy Storage: Systems and Applications , 2002 .

[7]  C. Cho,et al.  Microencapsulation of octadecane as a phase-change material by interfacial polymerization in an emulsion system , 2002 .

[8]  Rui Yang,et al.  Preparation, physical property and thermal physical property of phase change microcapsule slurry and phase change emulsion☆ , 2003 .

[9]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .

[10]  K. P. Rao,et al.  PREPARATION, CHARACTERISATION AND FABRICATION OF INTRAOCULAR LENS FROM PHOTO INITIATED POLYMERISED POLY (METHYL METHACRYLATE) , 2004 .

[11]  Z. Tan,et al.  Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage , 2004 .

[12]  X. X. Zhang,et al.  Fabrication and properties of microcapsules and nanocapsules containing n-octadecane , 2004 .

[13]  Ahmet Sarı,et al.  Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties , 2004 .

[14]  X. X. Zhang,et al.  Thermal stability and permeability of microencapsulated n-octadecane and cyclohexane , 2005 .

[15]  Y. Tseng,et al.  Preparation of microencapsulated phase-change materials (MCPCMs) by means of interfacial polycondensation , 2005, Journal of microencapsulation.

[16]  J. Su,et al.  Preparation and mechanical properties of thermal energy storage microcapsules , 2005 .

[17]  Y. Shin,et al.  Development of thermoregulating textile materials with microencapsulated phase change materials (PCM). IV. Performance properties and hand of fabrics treated with PCM microcapsules , 2005 .

[18]  A. Sari,et al.  Poly(ethylene glycol)/acrylic polymer blends for latent heat thermal energy storage , 2006 .

[19]  Zhengguo Zhang,et al.  Study on paraffin/expanded graphite composite phase change thermal energy storage material , 2006 .

[20]  H. Paksoy,et al.  Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material , 2006 .

[21]  J. Su,et al.  Preparation and characterization of polyurethane microcapsules containing n‐octadecane with styrene‐maleic anhydride as a surfactant by interfacial polycondensation , 2006 .

[22]  Yong Huang,et al.  Electrospinning of thermo-regulating ultrafine fibers based on polyethylene glycol/cellulose acetate composite , 2007 .

[23]  J. Su,et al.  Synthesis of polyurethane microPCMs containing n-octadecane by interfacial polycondensation: Influence of styrene-maleic anhydride as a surfactant , 2007 .

[24]  Khamid Mahkamov,et al.  Solar energy storage using phase change materials , 2007 .

[25]  Yan Zhang,et al.  Preparation and Thermal Property of Phase Change Material Microcapsules by Phase Separation , 2007 .

[26]  Manuel Carmona,et al.  Microencapsulation of PCMs with a polystyrene shell , 2007 .

[27]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[28]  Xingxiang Zhang,et al.  Preparation and characterization of microencapsulated phase change material with low remnant formaldehyde content , 2007 .

[29]  E. Onder,et al.  The manufacture of microencapsulated phase change materials suitable for the design of thermally enhanced fabrics , 2007 .

[30]  Thermal requirements to obtain calcined and frits of ulexite , 2007 .

[31]  Subrata Mondal,et al.  Phase change materials for smart textiles – An overview , 2008 .

[32]  E. Onder,et al.  Encapsulation of phase change materials by complex coacervation to improve thermal performances of woven fabrics , 2008 .

[33]  Yong Huang,et al.  A novel shape-stabilized PCM: Electrospun ultrafine fibers based on lauric acid/polyethylene terephthalate composite , 2008 .

[34]  Yi Li,et al.  Heat transfer of microencapsulated PCM slurry flow in a circular tube , 2008 .

[35]  Ahmet Sarı,et al.  Preparation, thermal properties and thermal reliability of capric acid/expanded perlite composite for thermal energy storage , 2008 .

[36]  A. Sari,et al.  Fatty acid/poly(methyl methacrylate) (PMMA) blends as form-stable phase change materials for latent heat thermal energy storage , 2008 .

[37]  L. Cabeza,et al.  Experimental evaluation of commercial heat exchangers for use as PCM thermal storage systems , 2009 .

[38]  A. Mawire,et al.  Simulated performance of storage materials for pebble bed thermal energy storage (TES) systems , 2009 .

[39]  Jinyue Yan,et al.  Preparation and thermal properties of polyethylene glycol/expanded graphite blends for energy storage , 2009 .

[40]  Jinyue Yan,et al.  Enhanced thermal conductivity and thermal performance of form-stable composite phase change materials by using β-Aluminum nitride , 2009 .

[41]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[42]  Xiaoxi Yang,et al.  Preparation and performance of form-stable polyethylene glycol/silicon dioxide composites as solid-liquid phase change materials , 2009 .

[43]  Mohamed Rady,et al.  Thermal performance of packed bed thermal energy storage units using multiple granular phase change composites , 2009 .

[44]  Wei Xiao,et al.  Analytical optimization of interior PCM for energy storage in a lightweight passive solar room , 2009 .

[45]  Z. Tan,et al.  Microencapsulation of n-eicosane as energy storage material , 2010 .

[46]  Thermal Degradation of Polymethylmethacrylate , 2010 .