Enhancing the light extraction efficiency of GaN-based LEDs

GaN-based light-emitting diode (LED) has been widely used in recent years, and tremendous progress has been achieved in GaN-based semiconductor materials and relevant process. However, owing to the large refractive index contrast between GaN-based semiconductor materials and air, light can be easily totally internally reflected at the semiconductor/air interface, and the critical angle for light to escape from the semiconductor is small. Therefore, the light extraction efficiency for GaN-based LED is still low and needs improving. Some of the leading approaches to enhance light extraction efficiency of GaN-based LED such as surface texturing or roughening, omnidirectional reflectors, photonic crystals, laser liftoff, transparent electrode, patterned substrate and so on are introduced in detail. For each approach, how the variation in device structure or material improves the light extraction efficiency is analyzed thoroughly. At last, some of mentioned approaches that are promising are evaluated and viewed briefly.

[1]  Michael R. Krames,et al.  High-power AlGaInN flip-chip light-emitting diodes , 2001 .

[2]  E. Fred Schubert,et al.  GaInN light-emitting diode with conductive omnidirectional reflector having a low-refractive-index indium-tin oxide layer , 2006 .

[3]  W. Wang,et al.  High-power GaN-mirror-Cu light-emitting diodes for vertical current injection using laser liftoff and electroplating techniques , 2005, IEEE Photonics Technology Letters.

[4]  E. Fred Schubert,et al.  GaInN light-emitting diodes with RuO2/SiO2/Ag omni-directional reflector , 2004 .

[5]  Axel Scherer,et al.  Photonic crystals for confining, guiding, and emitting light , 2002 .

[6]  V. Loryuenyong,et al.  Enhancement of (In,Ga)N light-emitting diode performance by laser liftoff and transfer from sapphire to silicon , 2002, IEEE Photonics Technology Letters.

[7]  Tzong-Lin Wu,et al.  Theoretical demonstration of enhancement of light extraction of flip-chip GaN light-emitting diodes with photonic crystals , 2006 .

[8]  Thomas F. Krauss,et al.  Photonic crystals in the optical regime — past, present and future , 1999 .

[9]  Shyi-Ming Pan,et al.  Improvement of InGaN-GaN light-emitting diodes with surface-textured indium-tin-oxide transparent ohmic contacts , 2003, IEEE Photonics Technology Letters.

[10]  Light Extraction in GaInN Light-Emitting Diodes using Diffuse Omnidirectional Reflectors , 2006 .

[11]  Y. S. Wu,et al.  Enhanced performance of an InGaN-GaN light-emitting diode by roughening the undoped-GaN surface and applying a mirror coating to the sapphire substrate , 2006 .

[12]  Seong-Jin Kim,et al.  Vertical chip of GaN-based blue light-emitting diode , 2005 .

[13]  S. C. Wang,et al.  Efficiency Enhancement of GaN-Based Power-Chip LEDs with Sidewall Roughness by Natural Lithography , 2007 .

[14]  H. Kuo,et al.  High-Performance GaN-Based Vertical-Injection Light-Emitting Diodes With TiO$_{2}$–SiO $_{2}$ Omnidirectional Reflector and n-GaN Roughness , 2007, IEEE Photonics Technology Letters.

[15]  Ki-Dong Lee,et al.  Improvement of light extraction efficiency of flip-chip light-emitting diode by texturing the bottom side surface of sapphire substrate , 2006, IEEE Photonics Technology Letters.

[16]  R. Horng,et al.  Enhanced Light Output in Roughened GaN-Based Light-Emitting Diodes Using Electrodeless Photoelectrochemical Etching , 2006, IEEE Photonics Technology Letters.

[17]  Jong Kyu Kim,et al.  Solid-State Light Sources Getting Smart , 2005, Science.

[18]  Seong-Ju Park,et al.  Selective wet etching of p-GaN for efficient GaN-based light-emitting diodes , 2006, IEEE Photonics Technology Letters.

[19]  H. Kuo,et al.  Enhancing the output power of GaN-based LEDs grown on wet-etched patterned sapphire substrates , 2006, IEEE Photonics Technology Letters.

[20]  Enhancement of the light output of GaN-based light-emitting diodes with surface-patterned ITO electrodes by maskless wet-etching , 2007 .

[21]  W. Wang,et al.  Enhanced output power of near-ultraviolet InGaN-GaN LEDs grown on patterned sapphire substrates , 2005, IEEE Photonics Technology Letters.

[22]  Ru-Chin Tu,et al.  Enhanced output power of InGaN-GaN light-emitting diodes with high-transparency nickel-oxide-indium-tin-oxide Ohmic contacts , 2003 .

[23]  E. Yablonovitch,et al.  Inhibited spontaneous emission in solid-state physics and electronics. , 1987, Physical review letters.

[24]  Investigation of InGaN/GaN light emitting diodes with nano-roughened surface by excimer laser etching method , 2007 .

[25]  Yong-hee Lee,et al.  Custom crystals control photons , 2002 .

[26]  Kow-Ming Chang,et al.  Investigation of indium–tin-oxide ohmic contact to p-GaN and its application to high-brightness GaN-based light-emitting diodes , 2005 .

[27]  Chia-Feng Lin,et al.  Enhanced light output in nitride-based light-emitting diodes by roughening the mesa sidewall , 2005 .

[28]  T. Seong,et al.  Enhanced light extraction of GaN-based light-emitting diodes by using textured n-type GaN layers , 2007 .

[29]  Ray-Hua Horng,et al.  Fabrication of Pyramidal Patterned Sapphire Substrates for High-Efficiency InGaN-Based Light Emitting Diodes , 2006 .