Valorization of cotton stalks by fast pyrolysis and fixed bed air gasification for syngas production as precursor of second generation biofuels and sustainable agriculture.

In the present study, the potential of cotton stalks utilization for H(2) and syngas production with respect to CO(2) mitigation, by means of thermochemical conversion (pyrolysis and gasification) was investigated. Pyrolysis was conducted at temperature range of 400-760 degrees C and the main parametric study concerned the effect of temperature on pyrolysis product distribution. Atmospheric pressure, air gasification at 750-950 degrees C for various lambda (0.02-0.07) was also studied. Experimental results showed that high temperature favors gas production in both processes; while low lambda gasification gave high gas yield. Syngas (CO and H(2)) was increased with temperature, while CO(2) followed an opposite trend. By pyrolysis, higher H(2) concentration in the produced gas (approximately 39% v/v) was achieved and at the same time lower amounts of CO(2) produced, compared to air gasification.

[1]  A. Zabaniotou,et al.  Sunflower shells utilization for energetic purposes in an integrated approach of energy crops: laboratory study pyrolysis and kinetics. , 2008, Bioresource technology.

[2]  Anastasia Zabaniotou,et al.  Rapeseed residues utilization for energy and 2nd generation biofuels , 2008 .

[3]  Ayşe Eren Pütün,et al.  Fixed-bed catalytic pyrolysis of cotton-seed cake: effects of pyrolysis temperature, natural zeolite content and sweeping gas flow rate. , 2006, Bioresource technology.

[4]  Arif Hepbasli,et al.  Energetic and exergetic aspects of cotton stalk production in establishing energy policies , 2007 .

[5]  A. Bridgwater The technical and economic feasibility of biomass gasification for power generation , 1995 .

[6]  Anastasia Zabaniotou,et al.  Modular biomass gasification-based solid oxide fuel cells (SOFC) for sustainable development , 2008 .

[7]  Li Baoming,et al.  Devolatilization characteristics of biomass at flash heating rate , 2006 .

[8]  Andrew Narvaez,et al.  Biomass gasification with air in an atmospheric bubbling fluidized bed. Effect of six operational variables on the quality of the produced raw gas , 1996 .

[9]  Fausto Pochetti,et al.  Prediction of syngas quality for two-stage gasification of selected waste feedstocks. , 2004, Waste management.

[10]  Jun Wang,et al.  Catalytic effects of six inorganic compounds on pyrolysis of three kinds of biomass , 2006 .

[11]  Zhancheng Guo,et al.  Technologies for direct production of flexible H2/CO synthesis gas , 2006 .

[12]  Andreas Hornung,et al.  HTHP syngas cleaning concept of two stage biomass gasification for FT synthesis , 2008 .

[13]  D. T. Liang,et al.  Pyrolysis of palm oil wastes for enhanced production of hydrogen rich gases , 2006 .

[14]  F. S. Nakayama,et al.  Physical and combustion characteristics of pellet fuel from cotton gin by-products produced by select processing treatments , 2006 .

[15]  A. Pütün,et al.  Fixed-bed pyrolysis of cotton stalk for liquid and solid products , 2005 .

[16]  Thameur Aloui,et al.  Analytical modeling of polarizations in a solid oxide fuel cell using biomass syngas product as fuel , 2007 .

[17]  A. Çaǧlar,et al.  Conversion of cotton cocoon shell to hydrogen rich gaseous products by pyrolysis , 2002 .

[18]  P. Lv,et al.  An experimental study on biomass air-steam gasification in a fluidized bed. , 2004, Bioresource technology.

[19]  Na-na Wang,et al.  Bio-oil production from cotton stalk , 2008 .

[20]  J. R. Kim,et al.  Biomass gasification in a circulating fluidized bed , 2004 .