Methylcellulose Based Thermally Reversible Hydrogel System for Tissue Engineering Applications

The thermoresponsive behavior of a Methylcellulose (MC) polymer was systematically investigated to determine its usability in constructing MC based hydrogel systems in cell sheet engineering applications. Solution-gel analyses were made to study the effects of polymer concentration, molecular weight and dissolved salts on the gelation of three commercially available MCs using differential scanning calorimeter and rheology. For investigation of the hydrogel stability and fluid uptake capacity, swelling and degradation experiments were performed with the hydrogel system exposed to cell culture solutions at incubation temperature for several days. From these experiments, the optimal composition of MC-water-salt that was able to produce stable hydrogels at or above 32 °C, was found to be 12% to 16% of MC (Mol. wt. of 15,000) in water with 0.5× PBS (~150mOsm). This stable hydrogel system was then evaluated for a week for its efficacy to support the adhesion and growth of specific cells in culture; in our case the stromal/stem cells derived from human adipose tissue derived stem cells (ASCs). The results indicated that the addition (evenly spread) of ~200 µL of 2 mg/mL bovine collagen type -I (pH adjusted to 7.5) over the MC hydrogel surface at 37 °C is required to improve the ASC adhesion and proliferation. Upon confluence, a continuous monolayer ASC sheet was formed on the surface of the hydrogel system and an intact cell sheet with preserved cell–cell and cell–extracellular matrix was spontaneously and gradually detached when the grown cell sheet was removed from the incubator and exposed to room temperature (~30 °C) within minutes.

[1]  C. Colton,et al.  Effect of External Oxygen Mass Transfer Resistances on Viability of Immunoisolated Tissue a , 1997, Annals of the New York Academy of Sciences.

[2]  D. Wendt,et al.  The role of bioreactors in tissue engineering. , 2004, Trends in biotechnology.

[3]  Masayuki Yamato,et al.  Cell sheet engineering: recreating tissues without biodegradable scaffolds. , 2005, Biomaterials.

[4]  Sanjin Zvonic,et al.  Immunophenotype of Human Adipose‐Derived Cells: Temporal Changes in Stromal‐Associated and Stem Cell–Associated Markers , 2006, Stem cells.

[5]  P. R. A. Kumar,et al.  Alternate method for grafting thermoresponsive polymer for transferring in vitro cell sheet structures , 2007 .

[6]  J. Fradette,et al.  Cell sheet technology for tissue engineering: the self-assembly approach using adipose-derived stromal cells. , 2011, Methods in molecular biology.

[7]  Antonios G Mikos,et al.  Formation of three-dimensional cell/polymer constructs for bone tissue engineering in a spinner flask and a rotating wall vessel bioreactor. , 2002, Journal of biomedical materials research.

[8]  T. Okano,et al.  Creation of designed shape cell sheets that are noninvasively harvested and moved onto another surface. , 2000, Biomacromolecules.

[9]  H. Procter.  XXXV.—The equilibrium of dilute hydrochloric acid and gelatin , 1914 .

[10]  Ram V Devireddy,et al.  Transport phenomena during freezing of adipose tissue derived adult stem cells. , 2005, Biotechnology and bioengineering.

[11]  H. Sung,et al.  Novel living cell sheet harvest system composed of thermoreversible methylcellulose hydrogels. , 2006, Biomacromolecules.

[12]  Masayuki Yamato,et al.  Functional bioengineered corneal epithelial sheet grafts from corneal stem cells expanded ex vivo on a temperature-responsive cell culture surface , 2004, Transplantation.

[13]  J. Fradette,et al.  Regeneration of skin and cornea by tissue engineering. , 2009, Methods in molecular biology.

[14]  Clemens A van Blitterswijk,et al.  A perfusion bioreactor system capable of producing clinically relevant volumes of tissue-engineered bone: in vivo bone formation showing proof of concept. , 2005, Biomaterials.

[15]  Chee Yoon Yue,et al.  Thermally Induced Association and Dissociation of Methylcellulose in Aqueous Solutions , 2002 .

[16]  Linda G Griffith,et al.  Engineering principles of clinical cell-based tissue engineering. , 2004, The Journal of bone and joint surgery. American volume.

[17]  Masayuki Yamato,et al.  Novel approach for achieving double-layered cell sheets co-culture: overlaying endothelial cell sheets onto monolayer hepatocytes utilizing temperature-responsive culture dishes. , 2002, Journal of biomedical materials research.

[18]  D. Hutmacher,et al.  Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.

[19]  Masayuki Yamato,et al.  Application of periodontal ligament cell sheet for periodontal regeneration: a pilot study in beagle dogs. , 2005, Journal of periodontal research.

[20]  J. Fradette,et al.  Production of a new tissue-engineered adipose substitute from human adipose-derived stromal cells. , 2007, Biomaterials.

[21]  Tal Dvir,et al.  A novel perfusion bioreactor providing a homogenous milieu for tissue regeneration. , 2006, Tissue engineering.

[22]  T. Okano,et al.  Subcutaneous transplantation of autologous oral mucosal epithelial cell sheets fabricated on temperature-responsive culture dishes. , 2008, Journal of biomedical materials research. Part A.

[23]  T. V. Kumary,et al.  Cell patch seeding and functional analysis of cellularized scaffolds for tissue engineering , 2007, Biomedical materials.

[24]  L. C. Walker,et al.  Hydration—dehydration properties of methylcellulose and hydroxypropylmethylcellulose , 1995 .

[25]  T. Okano,et al.  Structural characterization of bioengineered human corneal endothelial cell sheets fabricated on temperature-responsive culture dishes. , 2006, Biomaterials.

[26]  F. Guilak,et al.  Adipose-derived adult stem cells: isolation, characterization, and differentiation potential. , 2003, Cytotherapy.

[27]  Lin Li,et al.  Effects of molecular weight on thermoreversible gelation and gel elasticity of methylcellulose in aqueous solution , 2005 .

[28]  J. Ford,et al.  Thermal analysis of hydroxypropylmethylcellulose and methylcellulose: powders, gels and matrix tablets. , 1999, International journal of pharmaceutics.

[29]  J. Gimble,et al.  Adipose-derived stem cells for regenerative medicine. , 2007, Circulation research.

[30]  L. Griffith,et al.  Tissue Engineering--Current Challenges and Expanding Opportunities , 2002, Science.

[31]  Sanjin Zvonic,et al.  Effect of Various Freezing Parameters on the Immediate Post‐Thaw Membrane Integrity of Adipose Tissue Derived Adult Stem Cells , 2005, Biotechnology progress.

[32]  Lin Li,et al.  Sol–gel transition of methylcellulose in phosphate buffer saline solutions , 2004 .

[33]  Joseph J Sistino.  Bioreactors for tissue engineering--a new role for perfusionists? , 2003, The journal of extra-corporeal technology.

[34]  Jing Zhang,et al.  Novel intra-tissue perfusion system for culturing thick liver tissue. , 2007, Tissue engineering.

[35]  T. Okano,et al.  Surface characterization of poly(N-isopropylacrylamide) grafted tissue culture polystyrene by electron beam irradiation, using atomic force microscopy, and X-ray photoelectron spectroscopy. , 2007, Journal of nanoscience and nanotechnology.

[36]  K. Tam,et al.  Salt-assisted and salt-suppressed sol-gel transitions of methylcellulose in water. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[37]  T. Okano,et al.  Cell sheet engineering for myocardial tissue reconstruction. , 2003, Biomaterials.

[38]  H. Lorenz,et al.  Multilineage cells from human adipose tissue: implications for cell-based therapies. , 2001, Tissue engineering.

[39]  H. Precheur.  Bone graft materials. , 2007, Dental clinics of North America.

[40]  A. Scallan,et al.  Effect of pH and neutral salts upon the swelling of cellulose gels , 1980 .

[41]  Masayuki Yamato,et al.  Transplantation of tissue-engineered epithelial cell sheets after excimer laser photoablation reduces postoperative corneal haze. , 2006, Investigative ophthalmology & visual science.

[42]  Jeffrey A. Hubbell,et al.  Endothelial Cell-Selective Materials for Tissue Engineering in the Vascular Graft Via a New Receptor , 1991, Bio/Technology.

[43]  J. Fradette,et al.  Dynamic culture induces a cell type‐dependent response impacting on the thickness of engineered connective tissues , 2013, Journal of tissue engineering and regenerative medicine.

[44]  N. Sarkar.  Thermal gelation properties of methyl and hydroxypropyl methylcellulose , 1979 .

[45]  G. Muschler,et al.  Bone graft materials. An overview of the basic science. , 2000, Clinical orthopaedics and related research.

[46]  W W Minuth,et al.  Tissue engineering and autologous transplant formation: practical approaches with resorbable biomaterials and new cell culture techniques. , 1996, Biomaterials.

[47]  T. Okano,et al.  Novel cell sheet carriers using polyion complex gel modified membranes for tissue engineering technology for cell sheet manipulation and transplantation , 2007 .

[48]  Linda G Griffith,et al.  Emerging Design Principles in Biomaterials and Scaffolds for Tissue Engineering , 2002, Annals of the New York Academy of Sciences.

[49]  D G Stein,et al.  Biocompatibility of methylcellulose-based constructs designed for intracerebral gelation following experimental traumatic brain injury. , 2001, Biomaterials.

[50]  Masayuki Yamato,et al.  Polysurgery of cell sheet grafts overcomes diffusion limits to produce thick, vascularized myocardial tissues , 2006, FASEB journal : official publication of the Federation of American Societies for Experimental Biology.

[51]  E. Heymann.  Studies on sol-gel transformations. I. The inverse sol-gel transformation of methylcellulose in water , 1935 .

[52]  B Mattiasson,et al.  'Smart' polymers and what they could do in biotechnology and medicine. , 1999, Trends in biotechnology.

[53]  Masayuki Yamato,et al.  Tissue Engineering Based on Cell Sheet Technology , 2007 .

[54]  T. Okano,et al.  Thermo-responsive culture dishes allow the intact harvest of multilayered keratinocyte sheets without dispase by reducing temperature. , 2001, Tissue engineering.