Characterisation of geometric and structural properties of pore surfaces of reactivated microporous carbons based upon image analysis and gas adsorption

Abstract The geometric and structural properties of pore surfaces of microporous carbon specimens were investigated using high resolution transmission electron microscopy (HRTEM) and nitrogen gas adsorption method based upon the fractal theory. The carbon powder specimens with various pore structures were prepared by reactivation of commercially as-activated carbon powder at 1273 K in an atmosphere of a CO 2 /CO gas mixture for different activation times. The surface fractal dimensions d F,surf of the carbon specimens were evaluated from the image analysis of the HRTEM images using perimeter–area method. In addition, the pore fractal dimensions d F,pore of the carbon specimens were determined from the analyses of nitrogen gas adsorption isotherms using non-linear fitting method based upon Dubinin–Astakhov adsorption theory in consideration of fractal pore size distribution. From the results of the image analyses of the HRTEM images, it was found that the surface fractal dimension d F,surf of the carbon specimens decreased in value with increasing degree of burn-off, which is ascribed to the more agglomeration of micropores by collapsing the pore walls between the pores. Moreover, from the quantitative coincidence of the nitrogen gas adsorption isotherms experimentally obtained with those theoretically calculated, it is suggested that the pore fractal dimension d F,pore of the carbon specimens is closely related to their porosity, i.e. as the pore fractal dimension d F,pore decreases, the relative volume fraction of the pores with larger size increases as well.

[1]  Hang Shi,et al.  Studies of activated carbons used in double-layer capacitors , 1998 .

[2]  Peter Pfeifer,et al.  Chemistry in noninteger dimensions between two and three. I. Fractal theory of heterogeneous surfaces , 1983 .

[3]  Peter Pfeifer,et al.  Fractal Analysis and Surface Roughness of Nonporous Carbon Fibers and Carbon Blacks , 1994 .

[4]  D. Farin,et al.  Chemistry in noninteger dimensions between two and three. II: Fractal surfaces of adsorbents , 1983 .

[5]  A. Zukal,et al.  Comparison plots: recent applications , 1996 .

[6]  J. A. Ritter,et al.  Correlation of Double‐Layer Capacitance with the Pore Structure of Sol‐Gel Derived Carbon Xerogels , 1999 .

[7]  Mitsuhiro Nakamura,et al.  Influence of physical properties of activated carbons on characteristics of electric double-layer capacitors , 1996 .

[8]  M. Dresselhaus,et al.  Analysis of pore structure of activated carbon fibers using high resolution transmission electron microscopy and image processing , 1995 .

[9]  A. Ōya,et al.  Electric Double-Layer Capacitance of Meso/Macroporous Activated Carbon Fibers Prepared by the Blending Method I. Nickel-Loaded Activated Carbon Fibers in Propylene Carbonate Solution Containing LiClO 4 Salt , 2002 .

[10]  S. Pyun,et al.  Kinetics of double-layer charging/discharging of the activated carbon fiber cloth electrode: effects of pore length distribution and solution resistance , 2003 .

[11]  J. Čejka,et al.  High-resolution adsorption of nitrogen on mesoporous alumina. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[12]  Harry Marsh,et al.  Introduction to carbon technologies , 1997 .

[13]  David B. Williams,et al.  Transmission Electron Microscopy , 1996 .

[14]  Wu,et al.  Multilayer adsorption on a fractally rough surface. , 1989, Physical review letters.

[15]  H. Teng,et al.  Characterization of High Porosity Carbon Electrodes Derived from Mesophase Pitch for Electric Double-Layer Capacitors , 2001 .

[16]  S. Pyun,et al.  Kinetics of Double-Layer Charging/Discharging of Activated Carbon Electrodes: Role of Surface Acidic Functional Groups , 2002 .

[17]  M. Dubinin.  Generalization of the theory of volume filling of micropores to nonhomogeneous microporous structures , 1985 .

[18]  S. Pyun,et al.  An investigation of fractal characteristics of mesoporous carbon electrodes with various pore structures , 2004 .

[19]  Kruk,et al.  Characterization of Structural and Surface Properties of Activated Carbon Fibers. , 1998, Journal of colloid and interface science.

[20]  S. J. Gregg,et al.  Adsorption Surface Area and Porosity , 1967 .

[21]  Roman Wojsz,et al.  The Structural Parameters of Microporous Solid, Including Fractal Dimension, on the Basis of the Potential Theory of Adsorption - the General Solution , 1997, Comput. Chem..

[22]  W. Steele,et al.  Equilibria and dynamics of gas adsorption on heterogeneous solid surfaces , 1997 .

[23]  K. Miura,et al.  High‐Capacity Electric Double‐Layer Capacitor with High‐Density‐Activated Carbon Fiber Electrodes , 2000 .

[24]  K. Sing.  Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984) , 1985 .

[25]  T. Osaka,et al.  Electrochemical modification of active carbon fiber electrode and its application to double-layer capacitor , 1996 .

[26]  Roman Wojsz,et al.  Fractal Dimension of Microporous Carbon on the Basis of First Solution of a Laplace Transform Using an Incomplete Gamma Function , 1996, Comput. Chem..

[27]  S. Pyun,et al.  The effect of pore structures on fractal characteristics of meso/macroporous carbons synthesised using silica template , 2005 .

[28]  M. Dubinin,et al.  Adsorption in micropores , 1967 .

[29]  J. Danielli,et al.  Progress in surface and membrane science , 1971 .

[30]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[31]  M. Dubinin,et al.  Physical Adsorption of Gases and Vapors in Micropores , 1975 .

[32]  A. M. Baró,et al.  Fractal surfaces of gold and platinum electrodeposits. Dimensionality determination by scanning tunneling microscopy , 1992 .

[33]  S. Pyun,et al.  Determination of the fractal dimensions of green MCMB and MCMB heat-treated at 800-1200 °C by using gas adsorption method , 2003 .

[34]  Benoit B. Mandelbrot,et al.  Fractal Geometry of Nature , 1984 .