Kinematic couplings: A review of design principles and applications

From the humble three legged milking stool to a SEMI standard for wafer pod location to numerous sub micron fixturing applications in instruments and machines, exactly constrained mechanisms provide precision, robustness, and certainty of location and design. Kinematic couplings exactly constrain six degrees of freedom between two parts and hence closed-form equations can be written to describe the structural performance of the coupling. Hertz contact theory can also be used to design the contact interface so very high stiffness and load capacity can also be achieved. Potential applications such as mechanical/electrical couplings for batteries could enable electric vehicles to rapidly exchange battery packs.

[1]  J. Maxwell.  Treatise on Natural Philosophy , 2022, Nature.

[2]  R. Ryan Vallance,et al.  Precisely positioning pallets in multi-station assembly systems , 2004 .

[3]  T. E. Tallian,et al.  Failure atlas for Hertz contact machine elements , 1992 .

[4]  John C. Ziegert,et al.  Air bearing kinematic couplings , 2007 .

[5]  Anastasios John Hart,et al.  Experimental determination of kinematic coupling repeatability in industrial and laboratory conditions , 2005 .

[6]  Martin L. Culpepper,et al.  Design of integrated eccentric mechanisms and exact constraint fixtures for micron-level repeatability and accuracy , 2005 .

[7]  Martin L. Culpepper,et al.  A dual-purpose positioner-fixture for precision six-axis positioning and precision fixturing: Part I. Modeling and design , 2007 .

[8]  Anastasios John Hart,et al.  Kinematic coupling interchangeability , 2004 .

[9]  A. Slocum,et al.  Precision Machine Design , 1992 .

[10]  Mathieu Barraja,et al.  Tolerancing kinematic couplings , 2005 .

[11]  James Clerk Maxwell,et al.  General considerations concerning Scientific Apparatus , 2011 .

[12]  K. Johnson.  One Hundred Years of Hertz Contact , 1982 .

[13]  Layton C. Hale.  Friction-based design of kinematic couplings , 1998 .

[14]  Martin L. Culpepper,et al.  Design and application of compliant quasi-kinematic couplings , 2000 .

[15]  Alexander H. Slocum,et al.  Design of three-groove kinematic couplings , 1992 .

[16]  Chris Evans,et al.  Precision engineering : an evolutionary view , 1989 .

[17]  Alexander H. Slocum,et al.  Quasi-Kinematic Couplings for Low-Cost Precision Alignment of High-Volume Assemblies , 2004 .

[18]  Martin L. Culpepper,et al.  Design of quasi-kinematic couplings , 2004 .

[19]  A. Slocum.  Kinematic couplings for precision fixturing—Part I: Formulation of design parameters , 1988 .

[20]  Martin L. Culpepper,et al.  A dual-purpose positioner-fixture for precision six-axis positioning and precision fixturing: Part II. Characterization and calibration , 2007 .

[21]  Layton C. Hale,et al.  Optimal design techniques for kinematic couplings , 2001 .

[22]  Gordon A. Keeler,et al.  A Novel Method for the On-Center Turning of Tightly Toleranced Micro Arrays. , 2007 .

[23]  Pcjn Nick Rosielle,et al.  Design of a kinematic coupling for precision applications , 1997 .

[24]  Alexander H. Slocum,et al.  Precision passive mechanical alignment of wafers , 2003 .

[25]  Alexander H. Slocum,et al.  Analysis of kinematic systems : a generalized approach , 1996 .

[26]  Alexander H. Slocum,et al.  Kinematic couplings for precision fixturing — Part 2: Experimental determination of repeatability and stiffness , 1988 .

[27]  J. Rinehart,et al.  U . S . Patent , 2006 .

[28]  Jay F. Tu,et al.  Precision X-Y microstagee with maneuverable kinematic coupling mechanism , 1996 .