Piezoresistance characterization of poly(dimethyl-siloxane) and poly(ethylene) carbon nanotube composites

This study examines the piezoresistive behavior of polymer–carbon nanotube composites. Piezoresistive composites of poly(dimethyl-siloxane) (PDMS) and poly(ethylene) (PE) filled with multiwall carbon nanotubes (MWNTs) were prepared. The morphology and the electrical conductivity of the composites were characterized at various MWNT compositions. The percolation threshold was found to be 3 wt% for PDMS composites and 2.2 wt% for PE composites. The piezoresistive behavior under compression was measured using a setup comprised of a mechanical tester and a digital sourcemeter. Negative piezoresistive behavior was observed, signifying a reducing mean interparticulate distance in the composites. The PE–MWNT composites were found to be more sensitive than the PDMS composites (97% versus 78% change in resistance), which was attributed to the dissimilar morphologies as a result of difference in processing. Increasing the MWNT concentration in the PE composites resulted in decreasing the sensitivity to stress. The results were found to fit well to a modified version of a piezoresistance model. PDMS and PE composites were found to have different piezoresistance behavior during stress relaxation and cyclic loading. The resistance of PE, in comparison to PDMS, was less prone to changes in stress during stress relaxation and exhibited greater sensitivity and less drift during cyclic loading.

[1]  G. Heinrich,et al.  Advanced elastomer nano-composites based on CNT-hybrid filler systems , 2009 .

[2]  H. Naguib,et al.  Synthesis and characterization of novel low density polyethylene–multiwall carbon nanotube porous composites , 2009 .

[3]  J. O. Aguilar,et al.  Strain sensing capabilities of a piezoresistive MWCNT-polysulfone film , 2010 .

[4]  J. Zavickis,et al.  Polyisoprene—multi-wall carbon nanotube composites for sensing strain , 2007 .

[5]  John G. Webster,et al.  Tactile Sensors for Robotics and Medicine , 1988 .

[6]  Q. Zheng,et al.  Time dependence of piezoresistance for the conductor-filled polymer composites , 2000 .

[7]  M. Klüppel,et al.  Mechanical and electrical analysis of carbon black networking in elastomers under strain , 2011 .

[8]  N. Kotov,et al.  Tailoring Piezoresistive Sensitivity of Multilayer Carbon Nanotube Composite Strain Sensors , 2008 .

[9]  J. Simmons.  Generalized Formula for the Electric Tunnel Effect between Similar Electrodes Separated by a Thin Insulating Film , 1963 .

[10]  D. De Rossi,et al.  Electroactive fabrics for distributed, conformable and interactive systems , 2002, Proceedings of IEEE Sensors.

[11]  N. Hu,et al.  Tunneling effect in a polymer/carbon nanotube nanocompositestrain sensor , 2008 .

[12]  Z. Dang,et al.  Supersensitive linear piezoresistive property in carbon nanotubes/silicone rubber nanocomposites , 2008 .

[13]  K. Schulte,et al.  Piezoresistive response of epoxy composites with carbon nanoparticles under tensile load , 2009 .

[14]  Wang Luheng,et al.  Influence of carbon black concentration on piezoresistivity for carbon-black-filled silicone rubber composite , 2009 .

[15]  P. R. Ukrainetz,et al.  Pressure-sensitive-paint force transducers , 1966 .

[16]  C. Renner,et al.  Giant room-temperature piezoresistance in a metal-silicon hybrid structure. , 2008, Physical review letters.

[17]  T. D. Brown,et al.  Miniature piezoresistive transducers for transient soft-body contact-stress problems , 1979 .

[18]  L. Chen,et al.  Piezoresistive Behavior Study on Finger‐Sensing Silicone Rubber/Graphite Nanosheet Nanocomposites , 2007 .

[19]  Jaeyoung Jang,et al.  Poly(3-hexylthiophene) wrapped carbon nanotube/poly(dimethylsiloxane) composites for use in finger-sensing piezoresistive pressure sensors , 2011 .

[20]  David Bloor,et al.  A metal–polymer composite with unusual properties , 2005 .