Mechanics of plasma exposed spin-on-glass (SOG) and polydimethyl siloxane (PDMS) surfaces and their impact on bond strength

Abstract Silicone polymer (PDMS), widely used for micro-fluidic and biosensor applications, possesses an extremely dynamic surface after it is subjected to an oxygen plasma treatment process. The surface becomes extremely hydrophilic immediately after oxygen plasma exposure by developing silanol bond (Si OH), which promotes its adhesion to some other surfaces like, silicon, silicon dioxide, glass, etc. Such a surface, if left in ambient dry air, shows a gradual recovery of hydrophobicity. We have found an identical behavior to occur to surfaces coated with a thin continuous film of SOG (methyl silsesquioxane). The chemistry induced by oxygen plasma treatment of a spin-on-glass (SOG) coated surface provides a much higher density of surface silanol groups in comparison to precleaned glass, silicon or silicon dioxide substrates thus providing a higher bond strength with polydimethyl siloxane (PDMS). The bonding protocol developed by using the spin coated and cured SOG intermediate layer provides an universal regime of multi level wafer bonding of PDMS to a variety of substrates. The paper describes a contact angle based estimation of bond strength for SOG and PDMS surfaces exposed to various combinations of plasma parameters. We have found that the highest bond strength condition is achieved if the contact angle on the SOG surface is less than 10°.

[1]  J P Landers,et al.  Polymerase chain reaction in polymeric microchips: DNA amplification in less than 240 seconds. , 2001, Analytical biochemistry.

[2]  E. Colgan,et al.  A practical implementation of silicon microchannel coolers for high power chips , 2005, Semiconductor Thermal Measurement and Management IEEE Twenty First Annual IEEE Symposium, 2005..

[3]  Low-k organosilicate films prepared by tetravinyltetramethylcyclotetrasiloxane , 2002 .

[4]  T. Matsue,et al.  Electroanalysis of metabolic flux from single cells in simple picoliter-volume microsystems. , 2002, Analytical chemistry.

[5]  Ulf W. Gedde,et al.  Hydrophobicity Recovery of Polydimethylsiloxane after Exposure to Corona Discharges , 1998 .

[6]  H. A. Benesi,et al.  An Infrared Study of the Water-Silica Gel System , 1959 .

[7]  Robin H. Liu,et al.  Microfluidic tectonics: a comprehensive construction platform for microfluidic systems. , 2000, Proceedings of the National Academy of Sciences of the United States of America.

[8]  Pascal Silberzan,et al.  Study of the self-adhesion hysteresis of a siloxane elastomer using the JKR method , 1994 .

[9]  J. Berg,et al.  Studies on surface wettability of poly(dimethyl) siloxane (PDMS) and glass under oxygen-plasma treatment and correlation with bond strength , 2005, Journal of Microelectromechanical Systems.

[10]  H. Hillborg,et al.  Hydrophobicity changes in silicone rubbers , 1999, IEEE Transactions on Dielectrics and Electrical Insulation.

[11]  G. Whitesides,et al.  Correlation Between Surface Free Energy and Surface Constitution , 1992, Science.

[12]  A Manz,et al.  Chemical amplification: continuous-flow PCR on a chip. , 1998, Science.

[13]  Daniel L. Flamm,et al.  Mechanisms of silicon etching in fluorine- and chlorine-containing plasmas , 1990 .

[14]  S. Gangopadhyay,et al.  Silylation Using a Supercritical Carbon Dioxide Medium to Repair Plasma-Damaged Porous Organosilicate Films , 2004 .

[15]  Stephen Quake,et al.  A nanoliter rotary device for polymerase chain reaction , 2002, Electrophoresis.

[16]  A. Heuberger,et al.  Anisotropic Etching of Crystalline Silicon in Alkaline Solutions I . Orientation Dependence and Behavior of Passivation Layers , 1990 .

[17]  Stephane Mouradian,et al.  Lab-on-a-chip: applications in proteomics. , 2002, Current opinion in chemical biology.

[18]  Control of high-density plasma sources for CVD and etching , 1997 .

[19]  Ernesto Occhiello,et al.  Polymer Surfaces: From Physics to Technology , 1994 .

[20]  M. L. Hair,et al.  Infrared spectroscopy in surface chemistry , 1967 .

[21]  T Fujii,et al.  Integration of gene amplification and capillary gel electrophoresis on a polydimethylsiloxane‐glass hybrid microchip , 2001, Electrophoresis.