A fuzzy logic MPPT controller based three phase grid-tied solar PV system with improved CPI voltage

This paper presents a fuzzy logic controller (FLC) based 3-φ grid-tied solar Photovoltaic aimed at grid side for change in voltage at CPI (common point of interface) by means of a DC link voltage control which is adaptive in nature. In this, boost converter with MPPT (Maximum power point tracking) procedure is used to pull out solar energy from solar PV module and feed the DC link of PV (photovoltaic) inverter. The VSC (voltage source converter) enables PV inverter to feed the power to the main grid. The proposed MPPT technique provides better dynamic performance than conventional MPPT technique under an abrupt change in voltage at CPI. The proposed FLC MPPT based solar PV system is modeled and results are validated in MATLAB/SIMULINK.

[1]  T. Suntio,et al.  Origin of Cross-Coupling Effects in Distributed DC–DC Converters in Photovoltaic Applications , 2013, IEEE Transactions on Power Electronics.

[2]  Bhim Singh,et al.  A Sustainable Solar Photovoltaic Energy System Interfaced with Grid-Tied Voltage Source Converter for Power Quality Improvement , 2017 .

[3]  Juan Gonzalez,et al.  Battery Energy Storage for Enabling Integration of Distributed Solar Power Generation , 2012, IEEE Transactions on Smart Grid.

[4]  Bhim Singh,et al.  A Three-Phase Grid Tied SPV System With Adaptive DC Link Voltage for CPI Voltage Variations , 2016, IEEE Transactions on Sustainable Energy.

[5]  Md Enamul Haque,et al.  A Simulated Annealing Global Maximum Power Point Tracking Approach for PV Modules Under Partial Shading Conditions , 2016, IEEE Transactions on Power Electronics.

[6]  Naran M. Pindoriya,et al.  Impact investigation of rooftop Solar PV system: A case study in India , 2012, 2012 3rd IEEE PES Innovative Smart Grid Technologies Europe (ISGT Europe).

[7]  Chi-Seng Lam,et al.  Design and Performance of an Adaptive Low-DC-Voltage-Controlled LC-Hybrid Active Power Filter With a Neutral Inductor in Three-Phase Four-Wire Power Systems , 2014, IEEE Transactions on Industrial Electronics.

[8]  Alex Q. Huang,et al.  A High Step-Up Three-Port DC–DC Converter for Stand-Alone PV/Battery Power Systems , 2013, IEEE Transactions on Power Electronics.

[9]  Kishore Chatterjee,et al.  Two-Stage Solar Photovoltaic-Based Stand-Alone Scheme Having Battery as Energy Storage Element for Rural Deployment , 2015, IEEE Transactions on Industrial Electronics.

[10]  Leopoldo Gil-Antonio,et al.  Maximum power point tracking techniques in photovoltaic systems: A brief review , 2016, 2016 13th International Conference on Power Electronics (CIEP).

[11]  Arun Kumar Verma,et al.  Neural network controlled grid interfaced solar photovoltaic power generation , 2014 .

[12]  Chuang Liu,et al.  High boost ratio hybrid transformer DC-DC converter for photovoltaic module applications , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[13]  E. Ribeiro,et al.  Fault-Tolerant Strategy for a Photovoltaic DC--DC Converter , 2013, IEEE Transactions on Power Electronics.

[14]  J. Jatskevich,et al.  Efficient Approaches for Modeling and Simulating Photovoltaic Power Systems , 2013, IEEE Journal of Photovoltaics.