Advanced application of a geometry-enhanced 3D-printed catalytic reformer for syngas production

[1]  Weihong Yang,et al.  Reforming processes for syngas production: A mini-review on the current status, challenges, and prospects for biomass conversion to fuels , 2022, Applications in Energy and Combustion Science.

[2]  A. Zagoruiko,et al.  Mathematical modeling of diesel autothermal reformer geometry modifications , 2022, Chemical Engineering Journal.

[3]  J. Casas,et al.  Enhanced Fluid Dynamics in 3D Monolithic Reactors to Improve the Chemical Performance: Experimental and Numerical Investigation , 2021, Industrial & Engineering Chemistry Research.

[4]  Wen‐ying Li,et al.  Synthesis of Ni/NiAlOx Catalysts for Hydrogenation Saturation of Phenanthrene , 2021, Frontiers in Chemistry.

[5]  Ó. Laguna,et al.  A review on additive manufacturing and materials for catalytic applications: Milestones, key concepts, advances and perspectives , 2021 .

[6]  J. Ren,et al.  Recent progress and perspectives of catalyst design and downstream integration in biomass tar reforming , 2021, Chemical Engineering Journal.

[7]  Feiqiang Guo,et al.  Synthesis of biomimetic monolithic biochar-based catalysts for catalytic decomposition of biomass pyrolysis tar , 2021 .

[8]  Florent Minette,et al.  Pressure drop and heat transfer of ZoneFlowTM structured catalytic reactors and reference pellets for Steam Methane Reforming , 2020 .

[9]  R. Hayes,et al.  Heat and mass transfer inside of a monolith honeycomb: From channel to full size reactor scale , 2020 .

[10]  S. Mahmud,et al.  Numerical Investigation of the Effects of Coke on Transport Properties in an Oxidative Fuel Cell Reformer , 2020, ACS omega.

[11]  N. Tsubaki,et al.  Metal 3D printing technology for functional integration of catalytic system , 2020, Nature Communications.

[12]  M. Aziz,et al.  Hydrogen production from catalytic steam reforming of biomass pyrolysis oil or bio-oil derivatives: A review , 2020 .

[13]  Sun Xiaoxin,et al.  Effect of Additives on Ni‐Based Catalysts for Hydrogen‐Enriched Production from Steam Reforming of Biomass , 2020 .

[14]  Liangxing Li,et al.  Pressure drop in packed beds with horizontally or vertically stratified structure , 2020 .

[15]  P. Anastas,et al.  Designing for a green chemistry future , 2020, Science.

[16]  Paul T. Williams,et al.  Pyrolysis-catalytic steam reforming of agricultural biomass wastes and biomass components for production of hydrogen/syngas , 2019, Journal of the Energy Institute.

[17]  V. Buwa,et al.  Structure-Resolved CFD Simulations of Different Catalytic Structures in a Packed Bed , 2019, Industrial & Engineering Chemistry Research.

[18]  Ib Chorkendorff,et al.  Electrified methane reforming: A compact approach to greener industrial hydrogen production , 2019, Science.

[19]  G. Lopez,et al.  Kinetic study of the catalytic reforming of biomass pyrolysis volatiles over a commercial Ni/Al2O3 catalyst , 2018, International Journal of Hydrogen Energy.

[20]  J. Greer,et al.  Additive manufacturing of polymer-derived titania for one-step solar water purification , 2018, Materials Today Communications.

[21]  G. Lopez,et al.  Evaluation of thermochemical routes for hydrogen production from biomass: A review , 2018, Energy Conversion and Management.

[22]  J. Hong,et al.  Rational design and preparation of hierarchical monoliths through 3D printing for syngas methanation , 2018 .

[23]  Chunfei Wu,et al.  Thermal Characteristics of Biomass Pyrolysis Oil and Potential Hydrogen Production by Catalytic Steam Reforming , 2018 .

[24]  S. Kuhn,et al.  3D printing in chemical engineering and catalytic technology: structured catalysts, mixers and reactors. , 2018, Chemical Society reviews.

[25]  Keywan Riahi,et al.  Open discussion of negative emissions is urgently needed , 2017 .

[26]  Paul T. Williams,et al.  Promoting hydrogen production and minimizing catalyst deactivation from the pyrolysis-catalytic steam reforming of biomass on nanosized NiZnAlOx catalysts , 2017 .

[27]  Paul T. Williams,et al.  Pyrolysis/reforming of rice husks with a Ni–dolomite catalyst: Influence of process conditions on syngas and hydrogen yield , 2016 .

[28]  G. Urban,et al.  Mass transport and catalytic activity in hierarchical/non-hierarchical and internal/external nanostructures: A novel comparison using 3D simulation , 2016 .

[29]  Chunfei Wu,et al.  Characteristics and catalytic properties of Ni/CaAlOx catalyst for hydrogen-enriched syngas production from pyrolysis-steam reforming of biomass sawdust , 2016 .

[30]  Lidong Li,et al.  Effect of NiAl2O4 Formation on Ni/Al2O3 Stability during Dry Reforming of Methane , 2015 .

[31]  M. Artetxe,et al.  Hydrogen Production from Biomass Pyrolysis and In-line Catalytic Steam Reforming , 2015 .

[32]  Shuirong Li,et al.  Strategies for improving the performance and stability of Ni-based catalysts for reforming reactions. , 2014, Chemical Society reviews.

[33]  J. Valyon,et al.  Steam reforming of bio-oil from pyrolysis of MBM over particulate and monolith supported Ni/γ-Al2O3 catalysts , 2013 .

[34]  Shuirong Li,et al.  Hydrogen Production via Glycerol Steam Reforming over Ni/Al2O3: Influence of Nickel Precursors , 2013 .

[35]  K. Pant,et al.  Hydrogen production by steam reforming of model bio-oil using structured Ni/Al2O3 catalysts , 2013 .

[36]  Paul J. Dauenhauer,et al.  Top ten fundamental challenges of biomass pyrolysis for biofuels. , 2012 .

[37]  Pornpote Piumsomboon,et al.  Catalytic steam reforming of biomass-derived tar for hydrogen production with K2CO3/NiO/γ-Al2O3 catalyst , 2012, Korean Journal of Chemical Engineering.

[38]  Tiejun Wang,et al.  Steam reforming of biomass raw fuel gas over NiO–MgO solid solution cordierite monolith catalyst , 2010 .

[39]  Claude Mirodatos,et al.  Hydrogen production from biomass-derived oil over monolithic Pt- and Rh-based catalysts using steam reforming and sequential cracking processes , 2008 .

[40]  M. Abraham,et al.  Development of a Novel Metal Monolith Catalyst for Natural Gas Steam Reforming , 2007 .

[41]  De Chen,et al.  Effect of supports and Ni crystal size on carbon formation and sintering during steam methane reforming , 2006 .

[42]  Ayhan Demirbas,et al.  Current Technologies for the Thermo-Conversion of Biomass into Fuels and Chemicals , 2004 .

[43]  I. Dybkjaer,et al.  Tubular reforming and autothermal reforming of natural gas — an overview of available processes , 1995 .

[44]  T. Bhaskar,et al.  Thermochemical Route for Biohydrogen Production , 2019, Biohydrogen.