A finite element model to predict the ablation depth in pulsed laser ablation

This work presents development of a two-dimensional finite element model to predict temperature distribution and ablation depth in a laser ablation process. The model considers a number of aspects of the process, which hitherto have been considered independently in the literature. The aspects considered include: temperature dependent material properties of the target material, effect of plasma shielding on the incident laser flux, and temperature dependent absorptivity and absorption coefficient of the target. It was evident that these considerations have resulted in a significant improvement in the ability of the model to predict the ablation depth. Finally, the predicted ablation depth was found to match extremely well with experimental results at lower laser fluences, though at higher fluences there is a marginal overestimation.

[1]  G. Hubler,et al.  Pulsed Laser Deposition of Thin Films , 2003, Handbook of Laser Technology and Applications.

[2]  R. Russo,et al.  Numerical modeling of pulsed laser evaporation of aluminum targets , 1998 .

[3]  F. Lusquiños,et al.  Finite element analysis of the initial stages of the laser ablation process , 2004 .

[4]  R. Vilar,et al.  Finite element simulation of pulsed laser ablation of titanium carbide , 2007 .

[5]  R. Vilar,et al.  Column-growth mechanisms during KrF laser micromachining of Al2O3–TiC ceramics , 2005 .

[6]  Salvatore Amoruso,et al.  Absorption and saturation mechanisms in aluminium laser ablated plasmas , 1997 .

[7]  R. C. Weast.  CRC Handbook of Chemistry and Physics , 1973 .

[8]  Nadeem Hasan Rizvi,et al.  Applications of laser ablation to microengineering , 2000, SPIE High-Power Laser Ablation.

[9]  R. Singh,et al.  Estimation of plasma absorption effects during pulsed laser ablation of high‐critical‐temperature superconductors , 1994 .

[10]  Nadezhda M. Bulgakova,et al.  INTERACTION OF LASER RADIATION WITH MATTER. LASER PLASMA: Thermal model of pulsed laser ablation under the conditions of formation and heating of a radiation-absorbing plasma , 1999 .

[11]  G. Yang.  Laser ablation in liquids : Applications in the synthesis of nanocrystals , 2007 .

[12]  Akos Vertes,et al.  Modeling the thermal-to-plasma transitions for Cu photoablation , 1994, IBM J. Res. Dev..

[13]  X. Tan,et al.  Improved thermal model and its application in UV high-power pulsed laser ablation of metal target , 2008 .

[14]  J. Lunney.  Pulsed laser deposition of metal and metal multilayer films , 1995 .

[15]  Tatsuo Okada,et al.  Synthesis of nano-structured materials by laser-ablation and their application to sensors , 2007 .

[16]  G. P. Parisi,et al.  Applications of ultra-short pulsed laser ablation: thin films deposition and fs/ns dual-pulse laser-induced breakdown spectroscopy , 2008 .

[17]  X. Tan,et al.  The investigation of optical characteristics of metal target in high power laser ablation , 2006 .