Modeling and control of hybrid photovoltaic wind power system with battery storage

Abstract In this paper, the model and the control of hybrid power system is presented. It comprises wind and photovoltaic sources with battery storage supplying a load via an inverter. First, the design and the identification of the hybrid power system components has been made, then the proposed system is modeled and simulated under Matlab/Simulink Package. Finally, the power control of the hybrid system is introduced, by using LabVIEW Software. The proposed control strategy has been experimentally implemented and practical results are presented to show the effectiveness of the proposed hybrid system.

[1]  Djamila Rekioua,et al.  Direct torque control strategy of permanent magnet synchronous machines , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.

[2]  Ali Malek,et al.  Lead acid batteries simulation including experimental validation , 2008 .

[3]  Djamila Rekioua,et al.  Optimization of Photovoltaic Power Systems: Modelization, Simulation and Control , 2012 .

[4]  James F. Manwell,et al.  Hybrid wind/PV/diesel hybrid power systems modeling and South American applications , 1996 .

[5]  Kamaruzzaman Sopian,et al.  Optimization of PV-Wind-Hydro-Diesel hybrid system by minimizing excess capacity , 2009 .

[6]  Esmail M. A. Mokheimer,et al.  Modeling and optimization of hybrid wind–solar-powered reverse osmosis water desalination system in Saudi Arabia , 2013 .

[7]  Christopher L. Bryant,et al.  Real-time data acquisition and control system for the measurement of motor and neural data , 2005, Journal of Neuroscience Methods.

[8]  K. Strunz,et al.  A review of hybrid renewable/alternative energy systems for electric power generation: Configurations, control and applications , 2011, 2012 IEEE Power and Energy Society General Meeting.

[9]  A. Rajendra Prasad,et al.  Optimization of integrated photovoltaic–wind power generation systems with battery storage , 2006 .

[10]  Djamila Rekioua,et al.  Vector control of autonomous induction generator taking saturation effect into account , 2008 .

[11]  Mona N. Eskander,et al.  Energy flow and management of a hybrid wind/PV/fuel cell generation system , 2006 .

[12]  Djamila Rekioua,et al.  Improved direct torque control of an induction generator used in a wind conversion system connected to the grid. , 2013, ISA transactions.

[13]  D. Rekioua,et al.  Development of hybrid photovoltaic-fuel cell system for stand-alone application , 2014 .

[14]  S. Umashankar,et al.  Real time simulation of solar photovoltaic module using labview data acquisition card , 2013, 2013 International Conference on Energy Efficient Technologies for Sustainability.

[15]  Ahmed Al-Salaymeh,et al.  Electrical production for domestic and industrial applications using hybrid PV-wind system , 2013 .

[16]  Djamila Rekioua,et al.  DSP-controlled direct torque control of induction machines based on modulated hysteresis control , 2009, 2009 International Conference on Microelectronics - ICM.

[17]  D. Trillo-Montero,et al.  Development of a software application to evaluate the performance and energy losses of grid-connected photovoltaic systems , 2014 .

[18]  John K. Kaldellis,et al.  Comparing wind and photovoltaic stand-alone power systems used for the electrification of remote consumers , 2007 .

[19]  Djamila Rekioua,et al.  Modeling and Simulation of a Photovoltaic System Using Fuzzy Logic Controller , 2009, 2009 Second International Conference on Developments in eSystems Engineering.

[20]  A.S. Carvalho,et al.  An integrated hybrid power system based on renewable energy sources , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[21]  Ersan Kabalci,et al.  Design and analysis of a hybrid renewable energy plant with solar and wind power , 2013 .