Direct solar water splitting cell using water, WO3, Pt, and polymer electrolyte membrane

A solar water splitting cell composed of WO3, Polymer Electrolyte Membrane (PEM) and Pt was constructed for producing hydrogen from deionized water in sunlight. Spectral responsivity measurements under various temperatures and bias voltages were conducted for the cell using the Incident Photon to Current Efficiency (IPCE) method. For comparison, a known WO3 Photo Electro Chemical (PEC) cell containing H3PO4 electrolyte, WO3/H3PO4/Pt, was tested using the same test method. The WO3/PEM–H2O/Pt cell showed better Quantum Efficiency (QE) performance compared to that obtained from the cell with the chemical electrolyte. For the first time, spectral responsivity of photo water splitting process without bias power was unveiled in the new WO3 cell, demonstrating the self-sustained photo electrolysis capability. Bias voltage effect on Solar to Hydrogen (STH) conversion efficiency was dramatic in the range from 0.2V to 1.2V and suppressions of STH were observed when high bias voltages were applied. In addition, a strong temperature effect on the energy conversion efficiency at high bias voltage was observed in the cell containing PEM–H2O, revealing that the STH at 54°C is nearly five times that at 14°C.

[1]  G. Peharz,et al.  Solar hydrogen production by water splitting with a conversion efficiency of 18 , 2007 .

[2]  F. Tsau,et al.  Hydrogen generation from hydrolysis of sodium borohydride using Ni–Ru nanocomposite as catalysts , 2008 .

[3]  A. Fujishima,et al.  Electrochemical Photolysis of Water at a Semiconductor Electrode , 1972, Nature.

[4]  R. Rocheleau,et al.  Progress in sputtered tungsten trioxide for photoelectrode applications , 2007 .

[5]  M. Grätzel Dye-sensitized solar cells , 2003 .

[6]  Helmut Tributsch,et al.  Photovoltaic hydrogen generation , 2008 .

[7]  Walter R. Duncan,et al.  Theoretical studies of photoinduced electron transfer in dye-sensitized TiO2. , 2007, Annual review of physical chemistry.

[8]  Walter R. Duncan,et al.  Photoinduced electron dynamics at the chromophore-semiconductor interface: A time-domain ab initio perspective , 2009 .

[9]  Egil Rasten Electrocatalysis in water electrolysis with solid polymerelectrolyte , 2003 .

[10]  Todd G. Deutsch,et al.  Photoelectrochemical Water Systems for H2 Production , 2007 .

[11]  Lars Hedström,et al.  Experimental results from a 5 kW PEM fuel cell stack operated on simulated reformate from highly diluted hydrocarbon fuels: Efficiency, dilution, fuel utilisation, CO poisoning and design criteria , 2009 .

[12]  J. Augustynski,et al.  Crystallographically oriented mesoporous WO3 films: synthesis, characterization, and applications. , 2001, Journal of the American Chemical Society.

[13]  Craig A. Grimes,et al.  Appropriate strategies for determining the photoconversion efficiency of water photoelectrolysis cells : A review with examples using titania nanotube array photoanodes , 2008 .

[14]  V. K. Mahajan,et al.  Determination of photo conversion efficiency of nanotubular titanium oxide photo-electrochemical cell for solar hydrogen generation , 2006 .

[15]  Jianli Hu,et al.  An overview of hydrogen production technologies , 2009 .

[16]  C. Bhattacharya,et al.  Studies on anodic corrosion of the electroplated CdSe in aqueous and non-aqueous media for photoelectrochemical cells and characterization of the electrode/electrolyte interface , 2005 .

[17]  I. E. Grey,et al.  Efficiency of solar water splitting using semiconductor electrodes , 2006 .