Adhesive properties of laminated alginate gels for tissue engineering of layered structures.

A significant challenge in tissue engineering is the creation of tissues with stratified morphology or embedded microstructures. This study investigated methods to fabricate composite gels from separately deposited alginate layers and examined the effects of processing methods on the mechanics of adhesion. Laminated alginate gels were created through a three step process which included: treatment of the interfaces with citrate; annealing of the gels to allow for molecular rearrangement of the alginate chains; and exposure to a CaCl(2) to crosslink the alginate sheets. Process variables included volume and concentration of applied citrate, annealing time, incubation time in CaCl(2), and CaCl(2) concentration. Laminated sheets were tested in lap-shear geometry to characterize failure phenomena and mechanical properties. The site of failure within the gel depended on the integrity of the interface, with weaker gels delaminating and gels with mechanical properties similar to that of bulk gels failing randomly throughout the thickness. Citrate volume, citrate concentration, CaCl(2) incubation time, and CaCl(2) concentration altered the mechanical properties of the laminated alginate sheets, while annealing time had little effect on all measured parameters. This study demonstrates the integration of separately fabricated alginate layers to create mechanically or chemically anisotropic or heterogeneous structures.

[1]  F Guilak,et al.  Compressive and shear properties of alginate gel: effects of sodium ions and alginate concentration. , 1999, Journal of biomedical materials research.

[2]  D J Mooney,et al.  Injection molding of chondrocyte/alginate constructs in the shape of facial implants. , 2001, Journal of biomedical materials research.

[3]  Miqin Zhang,et al.  Chitosan-alginate hybrid scaffolds for bone tissue engineering. , 2005, Biomaterials.

[4]  Byung-Ho Choi,et al.  Injectable bone using chitosan-alginate gel/mesenchymal stem cells/BMP-2 composites. , 2005, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

[5]  Jason P. Gleghorn,et al.  A microfluidic biomaterial. , 2005, Journal of the American Chemical Society.

[6]  David J Mooney,et al.  The tensile properties of alginate hydrogels. , 2004, Biomaterials.

[7]  E. Thonar,et al.  Synthesis and turnover of proteoglycans by human and bovine adult articular chondrocytes cultured in alginate beads. , 1992, Matrix.

[8]  E. Thonar,et al.  Aggrecan synthesized by mature bovine chondrocytes suspended in alginate. Identification of two distinct metabolic matrix pools. , 1994, The Journal of biological chemistry.

[9]  C. V. van Blitterswijk,et al.  Engineering of a dermal equivalent: seeding and culturing fibroblasts in PEGT/PBT copolymer scaffolds. , 2003, Tissue engineering.

[10]  J. Pedraz,et al.  Microcapsules prepared with different biomaterials to immobilize GDNF secreting 3T3 fibroblasts. , 2005, International journal of pharmaceutics.

[11]  T. Chow,et al.  Tensile, shear and cleavage bond strengths of alginate adhesive. , 1998, Journal of dentistry.

[12]  K Masuda,et al.  Tissue engineering of stratified articular cartilage from chondrocyte subpopulations. , 2003, Osteoarthritis and cartilage.

[13]  D. Mooney,et al.  Hydrogels for tissue engineering. , 2001, Chemical reviews.

[14]  H. Park The most effective protocol for mandibular setback surgery based on biological and functional concepts , 2005 .

[15]  E B Hunziker,et al.  Quantitative structural organization of normal adult human articular cartilage. , 2002, Osteoarthritis and cartilage.

[16]  D. Trono,et al.  Treatment of fulminant liver failure by transplantation of microencapsulated primary or immortalized xenogeneic hepatocytes , 2005, Transplantation proceedings.

[17]  J. Elisseeff,et al.  Experimental model for cartilage tissue engineering to regenerate the zonal organization of articular cartilage. , 2003, Osteoarthritis and cartilage.

[18]  H. Iwata,et al.  Adhesion between poly(ethylene-co-vinyl alcohol) (EVA) and titanium. , 2002, Journal of biomedical materials research.

[19]  Joe Tien,et al.  Formation of perfused, functional microvascular tubes in vitro. , 2006, Microvascular research.

[20]  Morgan E. Hott,et al.  Fabrication of Tissue Engineered Tympanic Membrane Patches Using Computer‐Aided Design and Injection Molding , 2004, The Laryngoscope.

[21]  L. Bonassar,et al.  Replacement of an avulsed phalanx with tissue-engineered bone. , 2001, The New England journal of medicine.

[22]  D. Mooney,et al.  Controlling rigidity and degradation of alginate hydrogels via molecular weight distribution. , 2004, Biomacromolecules.

[23]  P. Ma,et al.  Ionically crosslinked alginate hydrogels as scaffolds for tissue engineering: part 1. Structure, gelation rate and mechanical properties. , 2001, Biomaterials.

[24]  A. Sambanis,et al.  Vitrification of tissue engineered pancreatic substitute. , 2005, Transplantation proceedings.

[25]  L. Bonassar,et al.  Effect of substrate mechanics on chondrocyte adhesion to modified alginate surfaces. , 2004, Archives of biochemistry and biophysics.

[26]  E. Thonar,et al.  Phenotypic stability of bovine articular chondrocytes after long-term culture in alginate beads. , 1994, Journal of cell science.

[27]  Charles A Vacanti,et al.  Tissue Engineering of Autologous Cartilage for Craniofacial Reconstruction by Injection Molding , 2003, Plastic and reconstructive surgery.

[28]  L. Bonassar,et al.  Cell-based bonding of articular cartilage: An extended study. , 2003, Journal of biomedical materials research. Part A.

[29]  E. Thonar,et al.  Tissue‐Engineered Human Nasal Septal Cartilage Using the Alginate‐Recovered‐Chondrocyte Method , 2004, The Laryngoscope.

[30]  P. Eggli,et al.  Zone‐specific cell biosynthetic activity in mature bovine articular cartilage: A new method using confocal microscopic stereology and quantitative autoradiography , 1996, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[31]  Koichi Masuda,et al.  A novel two‐step method for the formation of tissue‐engineered cartilage by mature bovine chondrocytes: The alginate‐recovered‐chondrocyte (ARC) method , 2003, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[32]  G. Ateshian,et al.  A layered agarose approach to fabricate depth‐dependent inhomogeneity in chondrocyte‐seeded constructs , 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[33]  N. Simpson,et al.  Effects of growth regulation on conditionally-transformed alginate-entrapped insulin secreting cell lines in vitro. , 2005, Biomaterials.

[34]  E. Thonar,et al.  Characterization of crosslinked collagens synthesized by mature articular chondrocytes cultured in alginate beads: comparison of two distinct matrix compartments. , 1996, Experimental cell research.

[35]  L. Bonassar,et al.  Biomechanical analysis of a chondrocyte-based repair model of articular cartilage. , 1999, Tissue engineering.