Cavitation in materials with distributed weak zones: Implications on the origin of brittle fracture in metallic glasses
暂无分享,去创建一个
Huajian Gao | Yong-Wei Zhang | P. Murali | R. Narasimhan | Y. W. Zhang | T. Guo | I. Singh
[1] Wei Wang,et al. Characterization and modeling of breaking-induced spontaneous nanoscale periodic stripes in metallic glasses. , 2012, Small.
[2] P. Murali,et al. Atomic scale fluctuations govern brittle fracture and cavitation behavior in metallic glasses. , 2011, Physical review letters.
[3] W. Arnold,et al. Local elastic properties of a metallic glass. , 2011, Nature materials.
[4] C. Packard,et al. Nanoscale strength distribution in amorphous versus crystalline metals , 2010 .
[5] M. Demetriou,et al. Correlation between fracture surface morphology and toughness in Zr-based bulk metallic glasses , 2010 .
[6] Weihua Wang,et al. Understanding of nanoscale periodic stripes on fracture surface of metallic glasses , 2009 .
[7] L. Anand,et al. Fracture of metallic glasses at notches: Effects of notch-root radius and the ratio of the elastic shear modulus to the bulk modulus on toughness , 2009 .
[8] U. Ramamurty,et al. Mixed mode (I and II) crack tip fields in bulk metallic glasses , 2009 .
[9] Keith C. C. Chan,et al. Instability of crack propagation in brittle bulk metallic glass , 2008 .
[10] L. Dai,et al. Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage , 2008 .
[11] T. Hufnagel,et al. Mechanical behavior of amorphous alloys , 2007 .
[12] W. Wang,et al. Nanoscale periodic morphologies on the fracture surface of brittle metallic glasses. , 2007, Physical review letters.
[13] Weihua Wang,et al. Periodic corrugation on dynamic fracture surface in brittle bulk metallic glass , 2006 .
[14] J. Lewandowski,et al. Intrinsic and Extrinsic Toughening of Metallic Glasses , 2006 .
[15] Jan Schroers,et al. Ductile bulk metallic glass. , 2004, Physical review letters.
[16] Li Cheng,et al. Vapor pressure and void size effects on failure of a constrained ductile film , 2003 .
[17] L. Cheng,et al. Thermal and vapor pressure effects on cavitation and void growth , 2001 .
[18] W. Johnson,et al. Mechanical properties of Zr56.2Ti13.8Nb5.0Cu6.9Ni5.6Be12.5 ductile phase reinforced bulk metallic glass composite , 2001 .
[19] Yat Li,et al. Effect of crystallinity on the impact toughness of a La-based bulk metallic glass , 2000 .
[20] R. Dauskardt,et al. Enhanced Toughness Due to Stable Crack Tip Damage Zones in Bulk Metallic Glass , 1999 .
[21] Ivar E. Reimanis,et al. The fracture resistance of a model metal/ceramic interface , 1991 .
[22] P. A. Mataga. Deformation of crack-bridging ductile reinforcements in toughened brittle materials , 1989 .
[23] M. Ashby,et al. Flow characteristics of highly constrained metal wires , 1989 .
[24] C. Horgan,et al. Cavity Formation at the Center of a Composite Incompressible Nonlinearly Elastic Sphere , 1989 .
[25] C. Horgan,et al. Void nucleation in tensile dead-loading of a composite incompressible nonlinearly elastic sphere , 1989 .
[26] C. Horgan,et al. A bifurcation problem for a compressible nonlinearly elastic medium: growth of a micro-void , 1986 .
[27] S. J. Shaw,et al. Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies , 1983 .
[28] J. Ball,et al. Discontinuous equilibrium solutions and cavitation in nonlinear elasticity , 1982, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.
[29] Robert M. McMeeking,et al. Finite deformation analysis of crack-tip opening in elastic-plastic materials and implications for fracture , 1977 .
[30] Frans Spaepen,et al. A microscopic mechanism for steady state inhomogeneous flow in metallic glasses , 1977 .
[31] A. Argon,et al. The mechanism of fracture in glassy materials capable of some inelastic deformation , 1976 .
[32] Alan N. Gent,et al. Internal rupture of bonded rubber cylinders in tension , 1961, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.
[33] Jonas Faleskog,et al. Micromechanics of coalescence—I. Synergistic effects of elasticity, plastic yielding and multi-size-scale voids , 1997 .
[34] D. Polignone,et al. Effects of material anisotropy and inhomogeneity on cavitation for composite incompressible anisotropic nonlinearly elastic spheres , 1993 .
[35] R. Abeyaratne,et al. Cavitation in elastic and elastic-plastic solids , 1992 .
[36] J. Hutchinson,et al. Cavitation instabilities in a power hardening elastic-plastic solid , 1992 .
[37] Viggo Tvergaard,et al. Cavitation instabilities in elastic-plastic solids , 1991 .
[38] A. G. Varias,et al. Ductile failure of a constrained metal foil , 1991 .
[39] C. Horgan,et al. A note on a bifurcation problem in finite plasticity related to void nucleation , 1987 .
[40] A. Argon. Plastic deformation in metallic glasses , 1979 .