Reliability monitoring ring oscillator structures for isolated/combined NBTI and PBTI measurement in high-k metal gate technologies

Ring oscillator (RO) structures that separate NBTI and PBTI effects are implemented in a high-k metal gate technology. The measurement results clearly show significant RO frequency degradation from PBTI as well as NBTI. For comparison, RO structures with the same principle are also implemented in a SiO2/poly-gate technology, where PBTI is negligible. Experimental results show noticeable frequency degradation under NBTI-only stress mode but negligible degradation under PBTI-only mode, which illustrates the validity of the proposed principle and structures.

[1]  S. Natarajan,et al.  Impact of negative bias temperature instability on digital circuit reliability , 2002, 2002 IEEE International Reliability Physics Symposium. Proceedings. 40th Annual (Cat. No.02CH37320).

[2]  C. Cabral,et al.  A Comparative Study of NBTI and PBTI (Charge Trapping) in SiO2/HfO2 Stacks with FUSI, TiN, Re Gates , 2006, 2006 Symposium on VLSI Technology, 2006. Digest of Technical Papers..

[3]  C.H. Kim,et al.  Silicon Odometer: An On-Chip Reliability Monitor for Measuring Frequency Degradation of Digital Circuits , 2007, 2007 IEEE Symposium on VLSI Circuits.

[4]  T. Grasser,et al.  The Universality of NBTI Relaxation and its Implications for Modeling and Characterization , 2007, 2007 IEEE International Reliability Physics Symposium Proceedings. 45th Annual.

[5]  Ching-Te Chuang,et al.  Ring oscillator circuit structures for measurement of isolated NBTI/PBTI effects , 2008, 2008 IEEE International Conference on Integrated Circuit Design and Technology and Tutorial.

[6]  Sangwoo Pae,et al.  Frequency and recovery effects in high-κ BTI degradation , 2009, 2009 IEEE International Reliability Physics Symposium.

[7]  A. Kerber,et al.  Voltage Ramp Stress for Bias Temperature Instability Testing of Metal-Gate/High- $k$ Stacks , 2009, IEEE Electron Device Letters.