In Vitro and In Vivo Evaluation of PEDOT Microelectrodes for Neural Stimulation and Recording

Cortical neural prostheses require chronically implanted small-area microelectrode arrays that simultaneously record and stimulate neural activity. It is necessary to develop new materials with low interface impedance and large charge transfer capacity for this application and we explore the use of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) for the same. We subjected PEDOT coated electrodes to voltage cycling between -0.6 and 0.8 V, 24 h continuous biphasic stimulation at 3 mC/cm2 and accelerated aging for four weeks. Characterization was performed using cyclic voltammetry, electrochemical impedance spectroscopy, and voltage transient measurements. We found that PEDOT coated electrodes showed a charge injection limit 15 times higher than Platinum Iridium (Ptlr) electrodes and electroplated Iridium Oxide (IrOx) electrodes when using constant current stimulation at zero voltage bias. In vivo chronic testing of microelectrode arrays implanted in rat cortex revealed that PEDOT coated electrodes show higher signal-to-noise recordings and superior charge injection compared to Ptlr electrodes.

[1]  Daniel R. Merrill,et al.  Electrical stimulation of excitable tissue: design of efficacious and safe protocols , 2005, Journal of Neuroscience Methods.

[2]  Kevin J. Otto,et al.  Poly(3,4-ethylenedioxythiophene) as a Micro-Neural Interface Material for Electrostimulation , 2009, Front. Neuroeng..

[3]  Nigel H Lovell,et al.  Cell attachment functionality of bioactive conducting polymers for neural interfaces. , 2009, Biomaterials.

[4]  S.F. Cogan,et al.  Sputtered iridium oxide films (SIROFs) for low-impedance neural stimulation and recording electrodes , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[5]  S.F. Cogan.  In vivo and In vitro Differences in the Charge-injection and Electrochemical Properties of Iridium Oxide Electrodes , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[6]  C. Kufta,et al.  Feasibility of a visual prosthesis for the blind based on intracortical microstimulation of the visual cortex , 1996 .

[7]  S. Cogan.  Neural stimulation and recording electrodes. , 2008, Annual review of biomedical engineering.

[8]  B. Widrow,et al.  On the Nature and Elimination of Stimulus Artifact in Nerve Signals Evoked and Recorded Using Surface Electrodes , 1982, IEEE Transactions on Biomedical Engineering.

[9]  Stuart F. Cogan,et al.  Penetrating microelectrode arrays with low-impedance sputtered iridium oxide electrode coatings , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[10]  P. Tresco,et al.  Response of brain tissue to chronically implanted neural electrodes , 2005, Journal of Neuroscience Methods.

[11]  P. Troyk,et al.  The influence of electrolyte composition on the in vitro charge-injection limits of activated iridium oxide (AIROF) stimulation electrodes , 2007, Journal of neural engineering.

[12]  N A Fitzsimmons,et al.  Primate Reaching Cued by Multichannel Spatiotemporal Cortical Microstimulation , 2007, The Journal of Neuroscience.

[13]  David C. Martin,et al.  Experimental and theoretical characterization of implantable neural microelectrodes modified with conducting polymer nanotubes. , 2008, Biomaterials.

[14]  S. B. Brummer,et al.  Activated Ir: An Electrode Suitable for Reversible Charge Injection in Saline Solution , 1983 .

[15]  Philip R. Troyk,et al.  In vitro comparison of the charge-injection limits of activated iridium oxide (AIROF) and platinum-iridium microelectrodes , 2005, IEEE Transactions on Biomedical Engineering.

[16]  David C. Martin,et al.  Electrochemical polymerization and properties of PEDOT/S-EDOT on neural microelectrode arrays , 2004 .

[17]  David C. Martin,et al.  Chronic neural recordings using silicon microelectrode arrays electrochemically deposited with a poly(3,4-ethylenedioxythiophene) (PEDOT) film , 2006, Journal of neural engineering.

[18]  M. Abidian,et al.  Conducting‐Polymer Nanotubes for Controlled Drug Release , 2006, Advanced materials.

[19]  Jose M. Carmena,et al.  A System for Neural Recording and Closed-Loop Intracortical Microstimulation in Awake Rodents , 2009, IEEE Transactions on Biomedical Engineering.

[20]  Jose M. Carmena,et al.  Frontiers in Integrative Neuroscience Integrative Neuroscience Behavioral Modulation of Stimulus-evoked Oscillations in Barrel Cortex of Alert Rats Materials and Methods , 2022 .

[21]  C. Schwarz,et al.  Spatiotemporal effects of microstimulation in rat neocortex: a parametric study using multielectrode recordings. , 2003, Journal of neurophysiology.

[22]  F. Solzbacher,et al.  In vitro comparison of sputtered iridium oxide and platinum-coated neural implantable microelectrode arrays , 2010, Biomedical materials.

[23]  James D. Weiland,et al.  In vitro electrical properties for iridium oxide versus titanium nitride stimulating electrodes , 2002, IEEE Transactions on Biomedical Engineering.

[24]  Boris Hofmann,et al.  Iridium Oxide Microelectrode Arrays for In Vitro Stimulation of Individual Rat Neurons from Dissociated Cultures , 2009, Front. Neuroeng..

[25]  D. Kipke,et al.  Microstimulation in auditory cortex provides a substrate for detailed behaviors , 2005, Hearing Research.

[26]  Richard H. Friend,et al.  Effects of Layer Thickness and Annealing of PEDOT:PSS Layers in Organic Photodetectors , 2009 .

[27]  J. A. Freeman.  An electronic stimulus artifact suppressor. , 1971, Electroencephalography and Clinical Neurophysiology.

[28]  Yasuhiko Jimbo,et al.  A system for MEA-based multisite stimulation , 2003, IEEE Transactions on Biomedical Engineering.

[29]  D. McCreery,et al.  Chronic microstimulation in the feline ventral cochlear nucleus: physiologic and histologic effects , 2000, Hearing Research.

[30]  Stuart F Cogan,et al.  Over-pulsing degrades activated iridium oxide films used for intracortical neural stimulation , 2004, Journal of Neuroscience Methods.

[31]  X. Beebe,et al.  Charge injection limits of activated iridium oxide electrodes with 0.2 ms pulses in bicarbonate buffered saline (neurological stimulation application) , 1988, IEEE Transactions on Biomedical Engineering.

[32]  G. Wallace,et al.  Conducting polymers for neural interfaces: challenges in developing an effective long-term implant. , 2008, Biomaterials.

[33]  W. Cascio,et al.  Electrodeposited iridium oxide pH electrode for measurement of extracellular myocardial acidosis during acute ischemia. , 1998, Analytical chemistry.

[34]  D W L Hukins,et al.  Accelerated aging for testing polymeric biomaterials and medical devices. , 2008, Medical engineering & physics.

[35]  E. J. Tehovnik,et al.  Phosphene induction by microstimulation of macaque V1 , 2007, Brain Research Reviews.

[36]  David C. Martin,et al.  Electrochemical deposition and characterization of poly(3,4-ethylenedioxythiophene) on neural microelectrode arrays , 2003 .

[37]  Hans von Holst,et al.  Stability of poly(3,4-ethylene dioxythiophene) materials intended for implants. , 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

[38]  X. Cui,et al.  Poly (3,4-Ethylenedioxythiophene) for Chronic Neural Stimulation , 2007, IEEE Transactions on Neural Systems and Rehabilitation Engineering.

[39]  Andreas Hierlemann,et al.  Impedance characterization and modeling of electrodes for biomedical applications , 2005, IEEE Transactions on Biomedical Engineering.