Numerical simulation of viscous flow past two circular cylinders of different diameters

Abstract Viscous flow past two circular cylinders of different diameters is simulated by using a finite element method. The diameter ratio between the small cylinder and the large one is 0.25. The Reynolds number based on the diameter of the cylinders is 500 for the large cylinder and 125 for the small cylinder. The gap between the small cylinder and the large cylinder ranges from 0.05 to 1.0 times the diameter of the large cylinder. The position angle of the small cylinder relative to the flow direction ranges from 0 to π. The effects of the gap ratio between the two cylinders and the position angle of the small cylinder on drag and lift coefficients, pressure distributions around the cylinders, the vortex shedding frequencies from the two cylinders and flow characteristics are investigated. The magnitudes and frequencies of the fluctuating forces acting on the two cylinders are compared with those on a single cylinder of an equivalent diameter.

[1]  Y. Kallinderis,et al.  Numerical study of incompressible flow about fixed cylinder pairs , 2003 .

[2]  Charles Dalton,et al.  The Suppression of Lift on a Circular Cylinder due to Vortex Shedding at Moderate Reynolds Numbers , 2001 .

[3]  H. Sakamoto,et al.  Optimum Suppression of Fluid Forces Acting on a Circular Cylinder , 1994 .

[4]  C. Williamson.  The Existence of Two Stages in the Transition to Three-Dimensionality of a Cylinder Wake , 1988 .

[5]  Hye-Jin Kim,et al.  Investigation of the flow between a pair of circular cylinders in the flopping regime , 1988, Journal of Fluid Mechanics.

[6]  D. Tritton.  Experiments on the flow past a circular cylinder at low Reynolds numbers , 1959, Journal of Fluid Mechanics.

[7]  Liang Cheng,et al.  A finite difference solution of the shear flow over a circular cylinder , 2000 .

[8]  K. C.H.,et al.  Oblique and parallel modes of vortex shedding in the wake of a circular cylinder at low Reynolds numbers , 2005 .

[9]  C. Williamson.  Evolution of a single wake behind a pair of bluff bodies , 1985, Journal of Fluid Mechanics.

[10]  Peter W. Bearman,et al.  The interaction between a pair of circular cylinders normal to a stream , 1973, Journal of Fluid Mechanics.

[11]  M. M. Zdravkovich,et al.  The effects of interference between circular cylinders in cross flow , 1987 .

[12]  Kenneth Kavanagh,et al.  Vortex shedding suppression for flow over a circular cylinder near a plane boundary , 2000 .

[13]  M. Braza,et al.  Numerical study and physical analysis of the pressure and velocity fields in the near wake of a circular cylinder , 1986, Journal of Fluid Mechanics.

[14]  Sanjay Mittal,et al.  Unsteady incompressible flows past two cylinders in tandem and staggered arrangements , 1997 .

[15]  Hiroshi Sakamoto,et al.  An optimum suppression of fluid forces by controlling a shear layer separated from a square prism , 1991 .

[16]  J. Ferrari,et al.  NUMERICAL SIMULATION OF FLOW INTERFERENCE BETWEEN TWO CIRCULAR CYLINDERS IN TANDEM AND SIDE-BY-SIDE ARRANGEMENTS , 2001 .

[17]  K. Sreenivasan,et al.  On the formation and suppression of vortex ‘shedding’ at low Reynolds numbers , 1990, Journal of Fluid Mechanics.

[18]  C. Williamson.  Oblique and parallel modes of vortex shedding in the wake of a circular cylinder at low Reynolds numbers , 1989, Journal of Fluid Mechanics.

[19]  M. Kawahara,et al.  The analysis of unsteady incompressible flows by a three-step finite element method , 1993 .

[20]  M. M. Zdravkovich,et al.  REVIEW—Review of Flow Interference Between Two Circular Cylinders in Various Arrangements , 1977 .