Numerical Study of an Oscillatory Piston-Driven Flow Through Open Cell Metal Foam Like Stirling Engine Regenerator

[1]  S. Senthilkumar,et al.  Correlations Based on Numerical Validation of Oscillating Flow Regenerator , 2022, Processes.

[2]  Y. Sugimoto,et al.  EFFECT OF RIB HEIGHT ON HEAT TRANSFER ENHANCEMENT BY COMBINATION OF A RIB AND PULSATING FLOW , 2022, Frontiers in Heat and Mass Transfer.

[3]  F. Lanzetta,et al.  Experimental Thermofluidic Characterization of Different Metallic Regenerators Crossed by Alternating Air Flow , 2022, Applied Sciences.

[4]  N. Gnanasekaran,et al.  Performance score based multi-objective optimization for thermal design of partially filled high porosity metal foam pipes under forced convection , 2022, International Journal of Heat and Mass Transfer.

[5]  Jinjia Wei,et al.  A comprehensive review of pulsating flow on heat transfer enhancement , 2021 .

[6]  A. Thakur,et al.  Numerical analysis of heat transfer enhancement of fluid past an oscillating circular cylinder in laminar flow regime , 2021 .

[7]  Sassi Ben Nasrallah,et al.  Convective Flow and Heat Transfer Inside a Beta Type Stirling Engine Based on Control Volume Finite Element Method , 2016 .

[8]  B. Sundén,et al.  Comparison and Analysis of Heat Transfer in Aluminum Foam Using Local Thermal Equilibrium or Nonequilibrium Model , 2016 .

[9]  Hasanen M. Hussen,et al.  Validation of thermal equilibrium assumption in free convection flow over a cylinder embedded in a packed bed , 2014 .

[10]  A. Narasimhan,et al.  Porous Medium Interconnector Effects on the Thermohydraulics of Near-Compact Heat Exchangers Treated as Porous Media , 2007 .

[11]  K. Leong,et al.  Characteristics of oscillating flow through a channel filled with open-cell metal foam , 2006 .

[12]  Abdulmajeed A. Mohamad,et al.  Experimental Investigation of the Potential of Metallic Porous Inserts in Enhancing Forced Convective Heat Transfer , 2004 .

[13]  Abdulmajeed A. Mohamad,et al.  Heat transfer enhancements in heat exchangers fitted with porous media Part I: constant wall temperature , 2003 .

[14]  Yue-Tzu Yang,et al.  Calculation of turbulent flow and heat transfer in a porous-baffled channel , 2003 .

[15]  B. Kang,et al.  Forced convection from aluminum foam materials in an asymmetrically heated channel , 2001 .

[16]  C. Y. Liu,et al.  An Experimental Study of Heat Transfer of a Porous Channel Subjected to Oscillating Flow , 2001 .

[17]  H. Sung,et al.  Pulsating flow and heat transfer in a pipe partially filled with a porous medium , 1997 .

[18]  Kambiz Vafai,et al.  Analysis of forced convection enhancement in a channel using porous blocks , 1994 .

[19]  A. Hadim.  Forced Convection in a Porous Channel With Localized Heat Sources , 1994 .

[20]  Jay M. Khodadadi,et al.  Oscillatory Fluid Flow Through a Porous Medium Channel Bounded by Two Impermeable Parallel Plates , 1991 .

[21]  U. Kurzweg.  Enhanced heat conduction in oscillating viscous flows within parallel-plate channels , 1985, Journal of Fluid Mechanics.

[22]  U. Kurzweg,et al.  Enhanced Heat Conduction in Fluids Subjected to Sinusoidal Oscillations , 1985 .

[23]  U. Kurzweg,et al.  Heat transfer by high‐frequency oscillations: A new hydrodynamic technique for achieving large effective thermal conductivities , 1984 .

[24]  B. R. Baliga,et al.  A CONTROL VOLUME FINITE-ELEMENT METHOD FOR TWO-DIMENSIONAL FLUID FLOW AND HEAT TRANSFER , 1983 .

[25]  R. Siegel,et al.  Heat Transfer for Pulsating Laminar Duct Flow , 1962 .

[26]  V. Ilyin,et al.  Numerical heat transfer in porous media heat exchangers of transport vehicles under unsteady flow , 2022, Transportation Research Procedia.

[27]  N. Gnanasekaran,et al.  Numerical Consideration of LTNE and Darcy Extended Forchheimer Models for the Analysis of Forced Convection in a Horizontal Pipe in the Presence of Metal Foam , 2020 .

[28]  S. B. Nasrallah,et al.  COMPRESSIBLE FLOW AND HEAT TRANSFER THROUGH A POROUS REGENERATOR UNDER PISTON MOTION , 2011 .

[29]  Z. Nessrine,et al.  FLOW AND HEAT TRANSFER DURING AN EXPANSION STROKE IN A COMPOSITE FLUID/POROUS SYSTEM , 2010 .

[30]  Sassi Ben Nasrallah,et al.  Flow and Heat Transfer in a Cylinder with a Porous Medium Insert along the Compression Stroke , 2008 .