Current source converter topologies for PMSG wind turbine applications

Different current source converter topologies for permanent magnet synchronous generator (PMSG) wind turbine applications are presented and analyzed in the paper. In high-power and medium-voltage range, current source converter has its natural advantages, such as simple topology, compact size, high power capability, excellent short circuit protection, and flexible power flow control. However, it also presents some challenges for control scheme development. In the paper two different approaches are shown. One utilizes phase control thyristors and active filter for harmonics compensation, while other uses PWM controlled SGCTs. By controlling the inverter modulation index at the highest possible level, the proposed control scheme keeps the dc link current at a minimum value with various wind speeds and therefore greatly reduces the converter power loss at lower power levels. Simulation results are given for both control schemes.

[1]  Yuan Xiao,et al.  A new current source converter using a symmetric gate commutated thyristor (SGCT) , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).

[2]  Bin Wu,et al.  High-Power Converters and ac Drives: Wu/High-Power Converters and ac Drives , 2006 .

[3]  T.A. Lipo,et al.  Reduced cost current-source topology improving the harmonic spectrum through on-line functional minimization , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[4]  B. R. Pelly,et al.  Thyristor Phase-Controlled Converters and Cycloconverters: Operation, Control, and Performance , 1971 .

[5]  R. Iravani,et al.  A neutral-point clamped converter system for direct-drive variable-speed wind power unit , 2006, IEEE Transactions on Energy Conversion.

[6]  P.N. Enjeti,et al.  Low cost PWM converter for utility interface of variable speed wind turbine generators , 1999, APEC '99. Fourteenth Annual Applied Power Electronics Conference and Exposition. 1999 Conference Proceedings (Cat. No.99CH36285).

[7]  Bin Wu,et al.  A Novel Control System for Current Source Converter Based Variable Speed PM Wind Power Generators , 2007, 2007 IEEE Power Electronics Specialists Conference.

[8]  Aleksandar Nikolic,et al.  Different methods for direct torque control of induction motor fed from current source inverter , 2008 .

[9]  Eduard Muljadi,et al.  Pitch-controlled variable-speed wind turbine generation , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[10]  Bin Wu,et al.  High-Power Converters and AC Drives , 2006 .

[11]  E. Spooner,et al.  Current source thyristor inverter and its active compensation system , 2003 .

[12]  F. Wittwer,et al.  Medium voltage converter for permanent magnet wind power generators up to 5 MW , 2005, 2005 European Conference on Power Electronics and Applications.

[13]  Greg Asher,et al.  A doubly fed induction generator using back-to-back PWM converters supplying an isolated load from a variable speed wind turbine , 1996 .