Experimental study of CFRP components subjected to dynamic crash loads

Abstract This paper deals with experimental investigations on the dynamic failure behaviour of generic carbon fibre reinforced plastic (CFRP) components subjected to axial crushing, which have been developed for energy absorption in a transport aircraft structure. Several material and design parameters of the crash component as well as its interaction with the adjacent fuselage structure were investigated. A specific test setup was developed to test under conditions similar to realistic crash loads in a fuselage structure. Besides a dynamic loading of v  = 6.7 m/s in axial crushing direction, a higher loading rate of v  = 10 m/s as well as off-axis loading conditions with an impact angle of β  = 10° were considered. A total of 72 dynamic component tests were performed resulting in different failure modes and force–displacement characteristics. The parameter influences were analysed on the basis of the observed structural and material failure modes, measured force–displacement characteristics as well as crash performance parameters (e.g. mass-specific energy absorption).

[1]  David C. Fleming,et al.  Crushing of Flat Graphite/Epoxy Laminates Using a Column Specimen , 2003 .

[2]  D. Hull,et al.  A unified approach to progressive crushing of fibre-reinforced composite tubes , 1991 .

[3]  Mostafa Rassaian,et al.  Crush energy absorption of composite channel section specimens , 2009 .

[4]  P. H. Thornton,et al.  Energy Absorption in Composite Structures , 1979 .

[5]  Paolo Feraboli,et al.  Development of a Corrugated Test Specimen for Composite Materials Energy Absorption , 2008 .

[6]  J. D. Cronkhite,et al.  Crashworthy airframe design concepts: Fabrication and testing , 1982 .

[7]  D. H. Laananen,et al.  Energy absorption in composite stiffeners , 1995 .

[8]  D. Kohlgrüber,et al.  Design and Performance of energy Absorbing Subfloor Structures in Aerospace Applications , 2000 .

[9]  Paolo Feraboli,et al.  Current efforts in standardization of composite materials testing for crashworthiness and energy absorption , 2006 .

[10]  Gary L. Farley,et al.  Energy-absorption capability of composite tubes and beams. Ph.D. Thesis , 1989 .

[11]  A. S. Mokhtar,et al.  Many aspects to improve damage tolerance of collapsible composite energy absorber devices , 2005 .

[12]  Dimitrios E. Manolakos,et al.  On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental , 2005 .

[13]  Dieter Kohlgrüber,et al.  Validation of Numerical Simulation of Composite Helicopter Sub-floor Structures Under Crash Loading , 1998 .

[14]  Athanasios G. Mamalis,et al.  Crashworthy capability of composite material structures , 1997 .

[15]  Andrew J. Gunnion,et al.  Investigation into laminate design of open carbon–fibre/epoxy sections by quasi–static and dynamic crushing , 2011 .

[16]  Alastair Johnson,et al.  Failure mechanisms in energy-absorbing composite structures , 2010 .

[17]  Matthew David.  Dynamic crush tests on composite segment specimens , 2009 .

[18]  J. Karger‐Kocsis,et al.  Crash and energy absorption behaviour of interleaved carbon-fibre-reinforced epoxy tubes , 1997 .

[19]  Gary L. Farley,et al.  Energy Absorption of Composite Materials , 1983 .

[20]  C. M. Kindervater,et al.  Composite Strength and Energy Absorption as an Aspect of Structural Crash Resistance , 1993 .

[21]  G. L. Farley,et al.  Crushing Characteristics of Continuous Fiber-Reinforced Composite Tubes , 1992 .

[22]  Chris D. Rudd,et al.  The effect of interlaminar toughening strategies on the energy absorption of composite tubes , 2004 .