Model Predictive Control of a Steam Methane Reforming Reactor Described by a Computational Fluid Dynamics Model

The present work demonstrates, for the first time, the development of a computationally efficient closed-loop system with a model predictive controller (MPC) where a computational fluid dynamics (CFD) process model is utilized to represent the process behavior. Specifically, we present the development of a MPC and its implementation within the CFD model of a steam methane reforming reactor, which has been developed and validated in our previous work, to create the CFD-based closed-loop system. Initially, we develop an MPC algorithm using a linear approximation of the dynamics based on the CFD data, and implement it within the CFD simulation as a user-defined function. The MPC accounts for the physical limitations (maximum allowable operating temperature of the outer reforming tube wall) of the reactor as a constraint. We demonstrate the application of the developed MPC within the CFD simulations for a set-point change under the influence of a tube-side feed disturbance. The CFD model determines an optimal...

[1]  Helen Durand,et al.  Temperature balancing in steam methane reforming furnace via an integrated CFD/data-based optimization approach , 2017, Comput. Chem. Eng..

[2]  Helen Durand,et al.  CFD modeling and control of a steam methane reforming reactor , 2016 .

[3]  Thomas A. Adams,et al.  Dynamic simulation and control of an integrated gasifier/reformer system. Part II: Discrete and model predictive control , 2015 .

[4]  A. Dixon.  CFD study of effect of inclination angle on transport and reaction in hollow cylinder catalysts , 2014 .

[5]  Reinhard Rauch,et al.  Pseudo heterogeneous modeling of catalytic methane steam reforming process in a fixed bed reactor , 2013 .

[6]  P. M. Diéguez,et al.  Computational Fluid Dynamics as a Tool for Designing Hydrogen Energy Technologies , 2013 .

[7]  Michael C. Georgiadis,et al.  A heterogeneous dynamic model for the simulation and optimisation of the steam methane reforming reactor , 2012 .

[8]  M. Nijemeisland,et al.  Comparison of CFD simulations to experiment under methane steam reforming reacting conditions , 2012 .

[9]  Hadi Ebrahimi,et al.  Numerical simulation of methane partial oxidation in the burner and combustion chamber of autothermal reformer , 2010 .

[10]  Hallvard F. Svendsen,et al.  Mass and heat transfer limitations in a heterogeneous model of a gas heated steam reformer , 2007 .

[11]  Yunlong Han,et al.  Combustion and Pyrolysis Reactions in a Naphtha Cracking Furnace , 2007 .

[12]  Geraldine J. Heynderickx,et al.  CFD simulations of steam cracking furnaces using detailed combustion mechanisms , 2006, Comput. Chem. Eng..

[13]  Neven Duić,et al.  Application of the Conservative Discrete Transfer Radiation Method to a Furnace with Complex Geometry , 2005 .

[14]  Eduard Egusquiza,et al.  CFD Flow and Heat Transfer in Nonregular Packings for Fixed Bed Equipment Design , 2004 .

[15]  H.P.A. Calis,et al.  CFD modelling and experimental validation of pressure drop and flow profile in a novel structured catalytic reactor packing , 2001 .

[16]  G. Froment,et al.  Methane steam reforming, methanation and water‐gas shift: I. Intrinsic kinetics , 1989 .

[17]  K. Steiglitz,et al.  Maximum likelihood estimation of rational transfer function parameters , 1967, IEEE Transactions on Automatic Control.