High-resolution 3-D full-loop simulation of a CFB carbonator cold model

Abstract This work focuses on the 3D full-loop CFD isothermal simulation of a transparent plexi-glass small-scale CFB carbonator built by IFK for the hydrodynamic investigation of the CFB reactor, utilized for the investigation of the calcium looping (Ca-L) process. This work couples the state of the art TFM approach with the advanced EMMS scheme for the calculation of drag coefficient exerted in the solid phase by the gas one. The CFB loop is discretized by 286,753 elements. In contrast to the majority of the published work, the flow characteristics of the re-circulation system of the unit, i.e. cyclone, downcomer and the pneumatic valve type of loop seal working as a flow regulator, is as well simulated and allows for the in-depth investigation and understanding of the whole CFB operation by means of CFD. In order to achieve this, the new proposed Pitman–Schaffer–Gray–Stiles yield criterion forms the basis, upon which the stresses exerted in the particulate phase within the loop-seal are calculated. The numerical results are averaged over a time period of 120 QUOTE s and the predicted flow patterns are compared against corresponding visual observations. Simulation results agree quite well with the experimental data, regarding the re-circulation flux and the pressure profile along the full-loop.

[1]  Jinghai Li,et al.  Virtual experimentation through 3D full-loop simulation of a circulating fluidized bed , 2008 .

[2]  P. Salatino,et al.  Char–Wall Interaction and Properties of Slag Waste in Entrained-Flow Gasification of Coal , 2011 .

[3]  S. Benyahia,et al.  Estimation of Numerical Errors Related to Some Basic Assumptions in Discrete Particle Methods , 2010 .

[4]  Jesse Zhu,et al.  Characterizing particle aggregates in a high-density and high-flux CFB riser , 2002 .

[5]  Ajay R. Bidwe,et al.  Study of Standpipe and Loop Seal Behavior in a Circulating Fluidized Bed for Geldart B Particles , 2011 .

[6]  Panagiotis Grammelis,et al.  Investigation of proper modeling of very dense granular flows in the recirculation system of CFBs , 2012 .

[7]  H. Arastoopour,et al.  Simulation of particles and gas flow behavior in the riser section of a circulating fluidized bed using the kinetic theory approach for the particulate phase , 2000 .

[8]  Ajay R. Bidwe,et al.  Parametric investigation of the calcium looping process for CO2 capture in a 10kWth dual fluidized bed , 2010 .

[9]  Derek Geldart,et al.  The behaviour of L-valves with granular powders , 1991 .

[10]  J. M. Rotter,et al.  Verification of a 3-dimensional model for filling pressures in square thin-walled silos , 2003 .

[11]  D. Zhang,et al.  High-resolution three-dimensional numerical simulation of a circulating fluidized bed , 2001 .

[12]  D. Gidaspow.  Multiphase Flow and Fluidization: Continuum and Kinetic Theory Descriptions , 1994 .

[13]  William I. Rose,et al.  Numerical modeling of geophysical granular flows: 2. Computer simulations of plinian clouds and pyroclastic flows and surges , 2004 .

[14]  U. Arena,et al.  L-valve behaviour with solids of different size and density , 1998 .

[15]  Pierre Chapelle,et al.  Analysis and modeling of heaping behavior of granular mixtures within a computational mechanics framework , 2006 .

[16]  O. Molerus,et al.  Transient dynamics of solid concentration in downer fluidized bed , 1998 .

[17]  Filip Johnsson,et al.  Time-series analysis of pressure fluctuations in gas–solid fluidized beds – A review , 2011 .

[18]  S. Ergun.  Fluid flow through packed columns , 1952 .

[19]  Ajay R. Bidwe,et al.  Parametric Study on the CO 2 Capture Efficiency of The Carbonate Looping Process in a 10 kW Dual Fluidized Bed , 2009 .

[20]  C. Wen.  Mechanics of Fluidization , 1966 .

[21]  Hamid Arastoopour,et al.  CFD Simulation of CO2 Sorption in a Circulating Fluidized Bed Using Deactivation Kinetic Model , 2011 .

[22]  P. Basu,et al.  Effect of pressure on loop seal operation for a pressurized circulating fluidized bed , 1999 .

[23]  Panagiotis Grammelis,et al.  Numerical investigation of the grid spatial resolution and the anisotropic character of EMMS in CFB multiphase flow , 2011 .

[24]  Joachim Werther,et al.  CFD-simulation of a circulating fluidized bed riser , 2009 .

[25]  Jam Hans Kuipers,et al.  Critical comparison of hydrodynamic models for gas-solid fluidized beds - Part I: bubbling gas-solid fludized beds operated with a jet , 2005 .

[26]  Dimitri Gidaspow,et al.  Computation of flow patterns in circulating fluidized beds , 1990 .

[27]  Panagiotis Grammelis,et al.  An advanced EMMS scheme for the prediction of drag coefficient under a 1.2 MWth CFBC isothermal flow—Part II: Numerical implementation , 2010 .

[28]  D. Jeffrey,et al.  Kinetic theories for granular flow: inelastic particles in Couette flow and slightly inelastic particles in a general flowfield , 1984, Journal of Fluid Mechanics.

[29]  D. Geldart.  Types of gas fluidization , 1973 .

[30]  R. Jackson,et al.  Frictional–collisional constitutive relations for granular materials, with application to plane shearing , 1987, Journal of Fluid Mechanics.

[31]  Pornpote Piumsomboon,et al.  Kinetic theory based computation of PSRI riser: Part I—Estimate of mass transfer coefficient , 2009 .

[32]  Wei Wang,et al.  Searching for a mesh-independent sub-grid model for CFD simulation of gas–solid riser flows , 2009 .

[33]  S. Ogawa,et al.  On the equations of fully fluidized granular materials , 1980 .

[34]  Olivier Simonin,et al.  Granular pressure and particle velocity fluctuations prediction in liquid fluidized beds , 2008 .

[35]  Sung Won Kim,et al.  Effects of particle properties on solids recycle in loop-seal of a circulating fluidized bed , 2002 .

[36]  R. Moore,et al.  Computational techniques , 1986 .

[37]  Prabir Basu,et al.  AN ANALYSIS OF LOOP SEAL OPERATIONS IN A CIRCULATING FLUIDIZED BED , 2000 .

[38]  Feridun Hamdullahpur,et al.  CFD SIMULATION OF THE GAS-SOLID FLOW IN THE RISER OF A CIRCULATING FLUIDIZED BED WITH SECONDARY AIR INJECTION , 2005 .

[39]  S. Dartevelle,et al.  Numerical and granulometric approaches to geophysical granular flows , 2003 .

[40]  Yassir Makkawi,et al.  The effect of friction and inter-particle cohesive forces on the hydrodynamics of gas–solid flow: A comparative analysis of theoretical predictions and experiments , 2006 .

[41]  Sankaran Sundaresan,et al.  Reflections on Mathematical Models and Simulation of Gas-Particle Flows , 2011 .

[42]  P. J. O'rourke,et al.  The multiphase particle-in-cell (MP-PIC) method for dense particulate flows , 1996 .

[43]  Myung Won Seo,et al.  CFD simulation with experiments in a dual circulating fluidized bed gasifier , 2012, Comput. Chem. Eng..

[44]  Pierre Chapelle,et al.  Mathematical modelling of the behaviour of granular material in a computational fluid dynamics framework using micro-mechanical models , 2002 .

[45]  X. Qi.  Experimental Study of Solids Holdups Inside Particle Clusters in CFB Risers , 2005 .

[46]  D. Gidaspow,et al.  Hydrodynamics of circulating fluidized beds: Kinetic theory approach , 1991 .

[47]  Wang Shuai,et al.  Modeling of cluster structure-dependent drag with Eulerian approach for circulating fluidized beds , 2011 .

[48]  S. Dartevelle,et al.  Numerical modeling of geophysical granular flows: 1. A comprehensive approach to granular rheologies and geophysical multiphase flows , 2004 .

[49]  Fariborz Taghipour,et al.  Computational fluid dynamics of a circulating fluidized bed under various fluidization conditions , 2008 .

[50]  Jinghai Li,et al.  A review of multiscale CFD for gas-solid CFB modeling , 2010 .

[51]  Leon R. Glicksman,et al.  Simplified scaling relationships for fluidized beds , 1993 .

[52]  Wei Ge,et al.  Eulerian simulation of heterogeneous gas–solid flows in CFB risers: EMMS-based sub-grid scale model with a revised cluster description , 2008 .

[53]  T. Shimizu,et al.  A twin fluid-bed reactor for removal of CO2 from combustion processes , 1999 .

[54]  P. Salatino,et al.  An assessment of water and steam reactivation of a fluidized bed spent sorbent for enhanced SO2 capture , 2008 .

[55]  Wen-Ching Yang,et al.  L-valve equations , 1993 .

[56]  Kemal Tuzla,et al.  Parametric effects of particle size and gas velocity on cluster characteristics in fast fluidized beds , 2000 .

[57]  D. Joseph,et al.  Modeling and numerical simulation of particulate flows by the Eulerian–Lagrangian approach , 2001 .

[58]  Jing Lei,et al.  A revised drag force model and the application for the gas-solid flow in the high-density circulating fluidized bed , 2011 .

[59]  J. C. Abanades,et al.  Cost structure of a postcombustion CO2 capture system using CaO. , 2007, Environmental science & technology.

[60]  Guodong Liu,et al.  Fluid dynamic simulation in a chemical looping combustion with two interconnected fluidized beds , 2011 .

[61]  Wei Ge,et al.  Meso-scale oriented simulation towards virtual process engineering (VPE)-The EMMS Paradigm , 2011 .

[62]  Christopher J. Brown,et al.  The influence of the base boundary condition in modelling filling of a metal silo , 2004 .

[63]  P. Salatino,et al.  Steam hydration-reactivation of FBC ashes for enhanced in situ desulphurization , 2009 .

[64]  D. Gidaspow,et al.  A bubbling fluidization model using kinetic theory of granular flow , 1990 .

[65]  Filip Johnsson,et al.  Characterization of fluid dynamics of fluidized beds by analysis of pressure fluctuations , 2007 .