Control-oriented unsteady one-dimensional model for a hydrocarbon regeneratively-cooled scramjet engine

[1]  B. Lee,et al.  Analysis of active cooling panels in a scramjet combustor considering the thermal cracking of hydrocarbon fuel , 2019, Applied Thermal Engineering.

[2]  Daren Yu,et al.  Control-oriented modeling and real-time simulation method for a dual-mode scramjet combustor , 2018, Acta Astronautica.

[3]  Daren Yu,et al.  Research progress on strut-equipped supersonic combustors for scramjet application , 2018, Progress in Aerospace Sciences.

[4]  Wen Bao,et al.  Oscillation of the shock train in an isolator with incident shocks , 2018, Physics of Fluids.

[5]  G. Xie,et al.  Improved thermal performance of cooling channels with truncated ribs for a scramjet combustor fueled by endothermic hydrocarbon , 2018, Applied Thermal Engineering.

[6]  Z. Tao,et al.  Correction of low-Reynolds number turbulence model to hydrocarbon fuel at supercritical pressure , 2018, Aerospace Science and Technology.

[7]  Bing-Bing Xu,et al.  Inverse identification of boundary conditions in a scramjet combustor with a regenerative cooling system , 2018 .

[8]  W. Yao,et al.  Modeling Analysis of an Actively Cooled Scramjet Combustor Under Different Kerosene/Air Ratios , 2018, Journal of Propulsion and Power.

[9]  Daren Yu,et al.  Prediction dynamic model of shock train with complex background waves , 2017 .

[10]  M. Dong,et al.  Numerical Method for Coupled Thermal Analysis of the Regenerative Cooling Structure , 2017 .

[11]  Antonella Ingenito,et al.  Experimental study of pyrolysis–combustion coupling in a regeneratively cooled combustor: System dynamics analysis , 2017 .

[12]  F. Qin,et al.  Flow and thermal analyses of regenerative cooling in non-uniform channels for combustion chamber , 2017 .

[13]  Nan Li,et al.  Recent research progress on unstart mechanism, detection and control of hypersonic inlet , 2017 .

[14]  Daren Yu,et al.  Quasi-One-Dimensional Model of Scramjet Combustor Coupled with Regenerative Cooling , 2016 .

[15]  Nickolay Smirnov,et al.  Accumulation of errors in numerical simulations of chemically reacting gas dynamics , 2015 .

[16]  Nickolay Smirnov,et al.  Combustion onset in non-uniform dispersed mixtures , 2015 .

[17]  Jiang Qin,et al.  Indirect measurement method of inner wall temperature of scramjet with a state observer , 2015 .

[18]  Y Lu,et al.  Development and Preliminary Validation of A Thermal Analysis Method for Hydrocarbon Regenerative-cooled Supersonic Combustor , 2015 .

[19]  Jiang Qin,et al.  Design and heat transfer characteristics analysis of combined active and passive thermal protection system for hydrogen fueled scramjet , 2015 .

[20]  Marcelo A. C. Fernandes,et al.  Platform for Real-Time Simulation of Dynamic Systems and Hardware-in-the-Loop for Control Algorithms , 2014, Sensors.

[21]  F. Qi,et al.  Experimental and Modeling Investigation of n-Decane Pyrolysis at Supercritical Pressures , 2014 .

[22]  Nickolay Smirnov,et al.  Hydrogen fuel rocket engines simulation using LOGOS code , 2014 .

[23]  Jiang Qin,et al.  Experimental study on effect of pressure on heat sink of n-decane , 2014 .

[24]  Nickolay Smirnov,et al.  Ignition of fuel sprays by shock wave mathematical modeling and numerical simulation , 2013 .

[25]  Q. Bi,et al.  Convective heat transfer and pressure drop characteristics of near-critical-pressure hydrocarbon fuel in a minichannel , 2013 .

[26]  Daren Yu,et al.  Off-Design Condition Cooling Capacity Analysis of Recooling Cycle for a Scramjet , 2012 .

[27]  V. V. Tyurenkova,et al.  Non-equilibrium diffusion combustion of a fuel droplet , 2012 .

[28]  Daren Yu,et al.  Efficient utilization of heat sink of hydrocarbon fuel for regeneratively cooled scramjet , 2012 .

[29]  W Bao,et al.  Modelling and simulation methodology of channel cooling using hydrocarbon fuel as coolant under supercritical pressures , 2011 .

[30]  Matthew Fotia,et al.  Reduced-order modeling of turbulent reacting flows with application to ramjets and scramjets , 2011 .

[31]  J. Qin,et al.  Heat transfer characteristic modelling and the effect of operating conditions on re-cooled cycle for a scramjet , 2011, The Aeronautical Journal.

[32]  Con J. Doolan,et al.  Quasi-One-Dimensional Model of Hydrogen-Fueled Scramjet Combustors , 2009 .

[33]  Ryan P. Starkey,et al.  Quasi-One-Dimensional High-Speed Engine Model with Finite-Rate Chemistry , 2001 .

[34]  A. C. Nixon,et al.  Endothermic fuels for hypersonic vehicles , 1968 .

[35]  Pan Pengfei,et al.  Quasi-one-dimensional model of supersonic a combustor with various fuels , 2013 .

[36]  Nickolay Smirnov,et al.  Evaporation and ignition of droplets in combustion chambers modeling and simulation , 2012 .

[37]  Liu Yuan,et al.  Design and performance investigation of sidewall compression scramjet inlets operating from Mach 4 to Mach 7 , 2011 .

[38]  Y. Touré,et al.  Validation of transient cooling modeling for hypersonic application , 2007 .

[39]  Chih-Jen Sung,et al.  Investigation of Vaporized Kerosene Injection and Combustion in a Supersonic Model Combustor , 2006 .

[40]  Michael K. Smart,et al.  Reference Enthalpy Method Developed from Solutions of the Boundary-Layer Equations , 2005 .

[41]  Ronald S. Fry,et al.  A Century of Ramjet Propulsion Technology Evolution , 2004 .