Novel ionic iodide-siloxane hybrid electrolyte for dye-sensitized solar cells.

A novel ionic siloxane hybrid electrolyte was fabricated by thermal polymerization of iodide-oligosiloxane resin. The nanosized iodide-oligosiloxane was synthesized by a simple sol-gel condensation of 3-iodopropyltrimethoxysilane and diphenylsilanediol. It is found that the composition and concentration of the oligosiloxane used in the electrolyte affect the performance of the dye-sensitized solar cells (DSSCs). An optimized DSSC with the hybrid electrolyte using smaller molecular-sized oligosiloxane with a greater amount of iodide groups presented solar to electricity conversion efficiency of 5.2% at 1 sunlight (100 mW cm(-2)), which is comparable to that afforded by a liquid electrolyte.

[1]  Zina Sassi,et al.  Spectroscopic study of TMOS–TMSM–MMA gels: Previously identification of the networks inside the hybrid material , 2002 .

[2]  Anders Hagfeldt,et al.  Optimization of dye-sensitized solar cells prepared by compression method , 2002 .

[3]  Takayuki Kitamura,et al.  Solid state dye sensitized solar cells using in situ polymerized PEDOTs as hole conductor , 2004 .

[4]  Jeong Hwan Kim,et al.  Synthesis of colorless imide hybrid nanocomposites using amine functionalized oligosiloxane nano-building clusters , 2006 .

[5]  M. Grätzel,et al.  A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films , 1991, Nature.

[6]  Shi-bi Fang,et al.  A novel polymer quaternary ammonium iodide and application in quasi-solid-state dye-sensitized solar cells , 2005 .

[7]  J. Kang,et al.  Synthesis and molecular structure analysis of nano‐sized methacryl‐grafted polysiloxane resin for fabrication of nano hybrid materials , 2005 .

[8]  Takayuki Kitamura,et al.  Quasi-solid-state dye-sensitized solar cells using room temperature molten salts and a low molecular weight gelator. , 2002, Chemical communications.

[9]  E. Stathatos,et al.  Organic/inorganic nanocomposite gels employed as electrolyte supports in Dye-sensitized Photoelectrochemical cells , 2002 .

[10]  B. Bae,et al.  Synthesis and Characterization of Photopatternable Epoxy Hybrid Materials for the Fabrication of Thick and Thermally Stable Microstructures with a High Aspect Ratio , 2008 .

[11]  R. Vittal,et al.  Quasi-solid-state dye-sensitized solar cells with siloxane poly(ethylene glycol) hybrid gel electrolyte , 2006 .

[12]  S. Lindquist,et al.  Donor–acceptor interaction between non-aqueous solvents and I2 to generate I−3, and its implication in dye sensitized solar cells , 1999 .

[13]  Peng Wang,et al.  Gelation of ionic liquid-based electrolytes with silica nanoparticles for quasi-solid-state dye-sensitized solar cells. , 2003, Journal of the American Chemical Society.

[14]  H. Schmidt,et al.  UV curable hard coatings on plastics , 1999 .

[15]  N. Park,et al.  Enhanced Photocurrent of Ru(II)-Dye Sensitized Solar Cells by Incorporation of Titanium Silicalite-2 in TiO 2 Film , 2002 .

[16]  Polycarpos Falaras,et al.  Binary Polyethylene Oxide/Titania Solid-State Redox Electrolyte for Highly Efficient Nanocrystalline TiO2 Photoelectrochemical Cells , 2002 .

[17]  E. Stathatos,et al.  Increase of the Efficiency of Quasi‐Solid State Dye‐Sensitized Solar Cells by a Synergy between Titania Nanocrystallites of Two Distinct Nanoparticle Sizes , 2007 .

[18]  Frank Lenzmann,et al.  A Solid-State Dye-Sensitized Solar Cell Fabricated with Pressure-Treated P25−TiO2 and CuSCN: Analysis of Pore Filling and IV Characteristics , 2002 .

[19]  Peng Wang,et al.  Solidifying liquid electrolytes with fluorine polymer and silica nanoparticles for quasi-solid dye-sensitized solar cells , 2004 .

[20]  T. Sato,et al.  A Thermoplastic Gel Electrolyte for Stable Quasi‐Solid‐State Dye‐Sensitized Solar Cells , 2007 .