Creep, fatigue, and fracture behavior of high-entropy alloys
暂无分享,去创建一个
Gang Wang | Peter K. Liaw | G. Wang | P. Liaw | Weidong Li | Weidong Li | Shiwei Wu | Shiwei Wu
[1] Yanfei Gao,et al. Fracture resistance of high entropy alloys: A review , 2018, Intermetallics.
[2] Peizhen Li,et al. Nanoscale serration and creep characteristics of Al0.5CoCrCuFeNi high-entropy alloys , 2018, Journal of Alloys and Compounds.
[3] John J. Lewandowski,et al. Fatigue behavior of high-entropy alloys: A review , 2018 .
[4] Peter K. Liaw,et al. Science and technology in high-entropy alloys , 2018, Science China Materials.
[5] P. Hodgson,et al. Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys , 2017 .
[6] S. Bai,et al. Microstructure, mechanical properties and energetic characteristics of a novel high-entropy alloy HfZrTiTa0.53 , 2017 .
[7] C. Kuo,et al. The High Temperature Tensile and Creep Behaviors of High Entropy Superalloy , 2017, Scientific Reports.
[8] Robert O. Ritchie,et al. Effect of temperature on the fatigue-crack growth behavior of the high-entropy alloy CrMnFeCoNi , 2017 .
[9] D. Raabe,et al. Hydrogen enhances strength and ductility of an equiatomic high-entropy alloy , 2017, Scientific Reports.
[10] Ehsan Ghassemali,et al. In-situ study of crack initiation and propagation in a dual phase AlCoCrFeNi high entropy alloy , 2017 .
[11] M. P. Phaniraj,et al. Resistance of CoCrFeMnNi high-entropy alloy to gaseous hydrogen embrittlement , 2017 .
[12] Michael C. Gao,et al. Abnormal temperature dependence of impact toughness in AlxCoCrFeNi system high entropy alloys , 2017 .
[13] Ke An,et al. Phase‐Transformation Ductilization of Brittle High‐Entropy Alloys via Metastability Engineering , 2017, Advanced materials.
[14] Karin A. Dahmen,et al. Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior , 2017 .
[15] T. Anderson,et al. Fracture mechanics - Fundamentals and applications , 2017 .
[16] Peter Hodgson,et al. Tension/compression asymmetry in additive manufactured face centered cubic high entropy alloy , 2017 .
[17] M. Meyers,et al. High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure , 2017, Scientific Reports.
[18] P. Liaw,et al. Corrosion-resistant high-entropy alloys: A review , 2017 .
[19] Sheng Guo,et al. Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range , 2017 .
[20] Sankha Bhowmick,et al. Powder metallurgical processing of equiatomic AlCoCrFeNi high entropy alloy: Microstructure and mechanical properties , 2017 .
[21] C. Persson,et al. Alloy design for intrinsically ductile refractory high-entropy alloys , 2016 .
[22] D. Miracle,et al. A critical review of high entropy alloys and related concepts , 2016 .
[23] Aijun Zhang,et al. Rapid preparation of AlCoCrFeNi high entropy alloy by spark plasma sintering from elemental powder mixture , 2016 .
[24] Xi Chen,et al. Affordable FeCrNiMnCu high entropy alloys with excellent comprehensive tensile properties , 2016 .
[25] Bin Liu,et al. Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases , 2016 .
[26] W. Oliver,et al. A direct comparison of high temperature nanoindentation creep and uniaxial creep measurements for commercial purity aluminum , 2016 .
[27] Dong-Hyun Lee,et al. Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys , 2016 .
[28] P. Liaw,et al. Nanoindentation Creep Behavior of an Al0.3CoCrFeNi High-Entropy Alloy , 2016, Metallurgical and Materials Transactions A.
[29] Yong Zhang,et al. The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures , 2016 .
[30] Bernd Gludovatz,et al. Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures , 2016, Nature Communications.
[31] Cong-qian Cheng,et al. The influence of Al elements on the structure and the creep behavior of AlxCoCrFeNi high entropy alloys , 2016 .
[32] Qiang Wang,et al. Designing eutectic high entropy alloys of CoCrFeNiNbx , 2016 .
[33] G. Peng,et al. Nanoindentation study on the creep characteristics of high-entropy alloy films: fcc versus bcc structures , 2016 .
[34] M. Gao,et al. High-Entropy Alloys: Fundamentals and Applications , 2016 .
[35] K. An,et al. A precipitation-hardened high-entropy alloy with outstanding tensile properties , 2016 .
[36] Shichao Ma,et al. Strain rate effects on the dynamic mechanical properties of the AlCrCuFeNi2 high-entropy alloy , 2016 .
[37] H. J. Yang,et al. Superior Mechanical Properties of AlCoCrFeNiTix High-Entropy Alloys upon Dynamic Loading , 2016, Journal of Materials Engineering and Performance.
[38] Oleg N. Senkov,et al. Microstructure and properties of a refractory high-entropy alloy after cold working , 2015 .
[39] Takahiko Kato,et al. First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials , 2015 .
[40] Walter Steurer,et al. Structural-disorder and its effect on the mechanical properties in single-phase TaNbHfZr high-entropy alloys , 2015, 1510.09047.
[41] P. Liaw,et al. Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization , 2015 .
[42] C. D. Lundin,et al. Fatigue behavior of a wrought Al 0.5 CoCrCuFeNi two-phase high-entropy alloy , 2015 .
[43] Reinhard Pippan,et al. Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation , 2015 .
[44] John J. Lewandowski,et al. Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys , 2015, JOM.
[45] R. Spolenak,et al. Ultrastrong ductile and stable high-entropy alloys at small scales , 2015, Nature Communications.
[46] Zhihua Wang,et al. Plastic Deformation of Al0.3CoCrFeNi and AlCoCrFeNi High-Entropy Alloys Under Nanoindentation , 2015, Journal of Materials Engineering and Performance.
[47] R. Scattergood,et al. Tensile properties of low-stacking fault energy high-entropy alloys , 2015 .
[48] Douglas L. Irving,et al. A Novel Low-Density, High-Hardness, High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures , 2015 .
[49] D. H. Wen,et al. Nanoindentation creep behavior in a CoCrFeCuNi high-entropy alloy film with two different structure states , 2015 .
[50] T. Nieh,et al. Steady state flow of the FeCoNiCrMn high entropy alloy at elevated temperatures , 2014 .
[51] Zhihua Wang,et al. Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification , 2014 .
[52] Uwe Glatzel,et al. Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloy system , 2014 .
[53] R. Ritchie,et al. A fracture-resistant high-entropy alloy for cryogenic applications , 2014, Science.
[54] Tao Wang,et al. A refractory Hf25Nb25Ti25Zr25 high-entropy alloy with excellent structural stability and tensile properties , 2014 .
[55] Jien-Wei Yeh,et al. High-Entropy Alloys , 2014 .
[56] Fucheng Zhang,et al. Fatigue crack growth behavior of a coarse- and a fine-grained high manganese austenitic twin-induced plasticity steel , 2014 .
[57] Oleg N. Senkov,et al. Effect of aluminum on the microstructure and properties of two refractory high-entropy alloys , 2014 .
[58] K. Dahmen,et al. Microstructures and properties of high-entropy alloys , 2014 .
[59] Dierk Raabe,et al. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility , 2014 .
[60] Michael D. Uchic,et al. Exploration and Development of High Entropy Alloys for Structural Applications , 2014, Entropy.
[61] T. Clyne,et al. A procedure for extracting primary and secondary creep parameters from nanoindentation data , 2013 .
[62] E. George,et al. Tensile properties of high- and medium-entropy alloys , 2013 .
[63] Hui Zhang,et al. Enhanced hardness and fracture toughness of the laser-solidified FeCoNiCrCuTiMoAlSiB0.5 high-entropy alloy by martensite strengthening , 2013 .
[64] C. Sarrazin-Baudoux,et al. Near-Threshold Fatigue Crack Propagation in Austenitic Stainless Steels , 2013 .
[65] George M. Pharr,et al. Measurement of power-law creep parameters by instrumented indentation methods , 2013 .
[66] Jien-Wei Yeh,et al. Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys , 2012 .
[67] C. Woodward,et al. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy , 2012, Journal of Materials Science.
[68] C. Schuh,et al. Effect of solid solution elements on nanoindentation hardness, rate dependence, and incipient plasticity in fine grained magnesium alloys , 2011 .
[69] Jae-il Jang,et al. Estimating the stress exponent of nanocrystalline nickel: Sharp vs. spherical indentation , 2011 .
[70] D. Caillard,et al. Thermally Activated Mechanisms in Crystal Plasticity , 2011 .
[71] C. Liu,et al. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys , 2011 .
[72] D. Miracle,et al. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .
[73] J. Yeh,et al. On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys , 2011 .
[74] P. Liaw,et al. Refractory high-entropy alloys , 2010 .
[75] H. Maier,et al. Fatigue crack growth—Microstructure relationships in a high-manganese austenitic TWIP steel , 2010 .
[76] J. Yeh,et al. Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys , 2010 .
[77] T. G. Nieh,et al. Creep of nanocrystalline nickel: A direct comparison between uniaxial and nanoindentation creep , 2010 .
[78] P. Liaw,et al. Fatigue behavior of Zr-based bulk-metallic glasses , 2008 .
[79] Jien-Wei Yeh,et al. High-Entropy Alloys – A New Era of Exploitation , 2007 .
[80] H. Conrad. Plastic deformation kinetics in nanocrystalline FCC metals based on the pile-up of dislocations , 2007 .
[81] Jien-Wei Yeh,et al. Adhesive wear behavior of AlxCoCrCuFeNi high-entropy alloys as a function of aluminum content , 2006 .
[82] D. L. Chen,et al. Effect of boron on fatigue crack growth behavior in superalloy IN 718 at RT and 650 °C , 2006 .
[83] L. Tsay,et al. Fatigue crack growth of AISI 304 stainless steel welds in air and hydrogen , 2004 .
[84] T. Shun,et al. Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .
[85] J. Lewandowski,et al. Effects of load ratio, R, and test temperature on fatigue crack growth of fully pearlitic eutectoid steel (fatigue crack growth of pearlitic steel) , 2004 .
[86] G. Eggeler,et al. Creep of a TiAl alloy: a comparison of indentation and tensile testing , 2003 .
[87] H. Conrad. Grain size dependence of the plastic deformation kinetics in Cu , 2003 .
[88] Brad L. Boyce,et al. Effect of load ratio and maximum stress intensity on the fatigue threshold in Ti–6Al–4V , 2001 .
[89] W. Johnson,et al. Fracture toughness and fatigue-crack propagation in a Zr–Ti–Ni–Cu–Be bulk metallic glass , 1997 .
[90] Harold Mindlin,et al. Aerospace structural metals handbook , 1995 .
[91] M. Dupeux,et al. High temperature tensile creep of CMSX-2 Nickel base superalloy single crystals , 1994 .
[92] S. Suresh. Fatigue of materials , 1991 .
[93] M. Ashby,et al. Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics , 1982 .
[94] R. Ritchie. Near-threshold fatigue crack propagation in ultra-high strength steel: influence of load ratio and cyclic strength , 1977 .
[95] A. Ohtomo,et al. Directional Solidification of René 80 , 1976 .
[96] J. F. Knott,et al. Mechanisms of fatigue crack growth in low alloy steel , 1973 .
[97] M. Howes. Additional thermal fatigue data on nickel- and cobalt-base superalloys, part 1 , 1973 .