Multi-point sandwich forming of a spherical sector with tool-shape compensation

Abstract The need for a cost-effective means of rapid, small-batch quality parts manufacture is greater than ever in the sheet metal industry. A new reconfigurable multi-point forming process, multi-point sandwich forming (MPSF), has been conceived and investigated as a possibly useful method to fulfill this need. This process is different from to conventional multi-point forming, in that a re-usable die sheet is used, a large distance between pins exists in the reconfigurable die and the upper die is made of polyurethane. In the work described in this paper, the performance of a multi-pin die with pins in circular array and an adjustable blank holder is investigated. This die is suitable to form work-pieces with rotational symmetry. Also, a die shape optimization design method using inverse displacement compensation is presented. Experimental and simulation results from forming a spherical shell sector, with a diameter of 380 mm show this method is feasible and effective. The results also show the blank holder can reduce/eliminate dimples that sometimes arise in the work-piece and the deformation of the interpolator during the forming process can induce a shape error in the formed work-piece.

[1]  Z. R. Wang,et al.  New forming technologies used in manufacturing large vessels , 2006 .

[2]  Karl Brown Ousterhout.  Design and control of a flexible process for three-dimensional sheet metal forming , 1991 .

[3]  Simona Socrate,et al.  A Finite Element Based Die Design Algorithm for Sheet-Metal Forming on Reconfigurable Tools , 2001 .

[4]  John M. Papazian,et al.  Tools of Change , 2002 .

[5]  Ming Zhe Li,et al.  Multi-point forming technology for sheet metal , 2002 .

[6]  R. H. Wagoner,et al.  DIE DESIGN METHOD FOR SHEET SPRINGBACK , 2004 .

[7]  Mary C. Boyce,et al.  Tooling and binder design for sheet metal forming processes compensating springback error , 1996 .

[8]  Marko Valjavec.  A closed-loop shape control methodology for flexible stretch forming over a reconfigurable tool , 1999 .

[9]  R. H. Wagoner,et al.  Practical Methods for the Design of Sheet Formed Components , 2004 .

[10]  David E. Hardt,et al.  Design and analysis of reconfigurable discrete dies for sheet metal forming , 1998 .

[11]  Apostolos P. Karafillis.  Tooling design for three-dimensional sheet metal forming using finite element analysis , 1994 .

[12]  Qi Zhang,et al.  Numerical simulation of deformation in multi-point sandwich forming , 2006 .

[13]  Mingzhe Li,et al.  Multi-point forming: a flexible manufacturing method for a 3-d surface sheet , 1999 .

[14]  Naomasa Nakajima,et al.  A Newly Developed Technique to Fabricate Complicated Dies and Electrodes with Wires , 1969 .