A highly efficient user-defined finite element for load distribution analysis of large-scale bolted composite structures

Abstract This paper presents the development of a highly efficient user-defined finite element for modelling the bolt–load distribution in large-scale composite structures. The method is a combined analytical/numerical approach and is capable of representing the full non-linear load–displacement behaviour of bolted composite joints both up to, and including, joint failure. In the elastic range, the method is generic and is a numerical extension of a closed-form method capable of modelling the load distribution in single-column joints. A semi-empirical approach is used to model failure initiation and energy absorption in the joint and this has been successfully applied in models of single-bolt, single-lap joints. In terms of large-scale applications, the method is validated against an experimental study of complex load distributions in multi-row, multi-column joints. The method is robust, accurate and highly efficient, thus demonstrating its potential as a time/cost saving design tool for the aerospace industry and indeed other industries utilising bolted composite structures.

[1]  M. A. McCarthy,et al.  Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: Part II––effects of bolt-hole clearance , 2005 .

[2]  Sergey V Shkarayev,et al.  Analysis of composite laminates with multiple fasteners , 1998 .

[3]  M. A. McCarthy,et al.  BOLJAT: a tool for designing composite bolted joints using three-dimensional finite element analysis , 2002 .

[4]  Stefan Hallström,et al.  Bearing strength of carbon fibre/epoxy laminates: effects of bolt-hole clearance , 2004 .

[5]  Magnus Friberg.  Fastener load distribution and interlaminar stresses in composite laminates , 2000 .

[6]  M. A. McCarthy,et al.  An experimental study of bolt–hole clearance effects in double-lap, multi-bolt composite joints , 2005 .

[7]  H. Huth,et al.  Influence of Fastener Flexibility on the Prediction of Load Transfer and Fatigue Life for Multiple-Row Joints , 1986 .

[8]  Conor T. McCarthy,et al.  A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints , 2010 .

[9]  Jin Min Zhang,et al.  Design and analysis of mechanically fastened composite joints and repairs , 2001 .

[10]  M. A. McCarthy,et al.  Three-dimensional finite element analysis of single-bolt, single-lap composite bolted joints: part I—model development and validation , 2005 .

[11]  M. A. McCarthy,et al.  A simple method for determining the effects of bolt-hole clearance on load distribution in single-column multi-bolt composite joints , 2006 .

[12]  Bruce L. Bunin,et al.  Critical joints in large composite aircraft structure , 1983 .

[13]  Johan Ekh,et al.  Finite element modeling and optimization of load transfer in multi-fastener joints using structural elements , 2008 .

[14]  M. A. McCarthy,et al.  An Experimental Study of Bolt-Hole Clearance Effects in Single-lap, Multibolt Composite Joints , 2005 .

[15]  David J. Elder,et al.  DEVELOPMENT OF FASTENER MODELS FOR IMPACT SIMULATION OF COMPOSITE STRUCTURES , 2006 .

[16]  Axel Fink,et al.  Hybrid titanium–CFRP laminates for high-performance bolted joints , 2009 .

[17]  F. L. Matthews,et al.  A Progressive Damage Model for Mechanically Fastened Joints in Composite Laminates , 1999 .

[18]  K. Appa,et al.  Strength Analysis of Laminated and Metallic Plates Bolted Together by Many Fasteners , 1986 .

[19]  Alastair Johnson,et al.  Numerical Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures , 2010 .

[20]  Conor T. McCarthy,et al.  A cubic spline implementation of non-linear shear behaviour in three-dimensional progressive damage models for composite laminates , 2010 .

[21]  E. Madenci,et al.  Analysis of bolted-bonded composite lap joints , 2007 .

[22]  M. A. McCarthy,et al.  Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints , 2002 .

[23]  Michael A. McCarthy.  BOJCAS: Bolted joints in composite aircraft structures , 2001 .

[24]  M. A. McCarthy,et al.  Modelling bird impacts on an aircraft wing – Part 2: Modelling the impact with an SPH bird model , 2005 .

[25]  Rodney S. Thomson,et al.  Experimental Investigation of Dynamically Loaded Bolted Joints in Carbon Fibre Composite Structures , 2010 .

[26]  William Barrois,et al.  Stresses and displacements due to load transfer by fasteners in structural assemblies , 1978 .

[27]  M. A. McCarthy,et al.  Experiences with Modeling Friction in Composite Bolted Joints , 2005 .

[28]  M. B. Tate,et al.  Preliminary Investigation of the Loads Carried by Individual Bolts in Bolted Joints , 1946 .

[29]  Jan Bäcklund,et al.  Design of multiple-row bolted composite joints under general in-plane loading , 1995 .

[30]  Ireneusz Lapczyk,et al.  Progressive damage modeling in fiber-reinforced materials , 2007 .

[31]  Conor T. McCarthy,et al.  An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints , 2011 .

[32]  M. A. McCarthy,et al.  Progressive damage analysis of multi-bolt composite joints with variable bolt–hole clearances , 2005 .