This paper presents the design of a Carbon Monoxide (CO) gas leakage detector in vehicles. The number of sudden death incidents due to excessive CO inhalation has recently increased. Many cases are due to driver habits and awareness, for instance, air conditioning switches remain on while they are sleeping in the car. This habit is not a good practice because if there were gas leakage into the cabin, especially CO, the situation could result in sudden death. Basically the driver feels sleepy when excessive CO concentrations occur in the cabin. Based on that, a vehicle gas leakage detector system has been developed using a gas sensor and logic detector circuit. Subsequently, the signal from the sensor is fed to an 8-bit PIC16F84 microcontroller onboard system via appropriate interfacing devices, which will run on pre-programmed instructions.
[1]
T. Tille,et al.
A High-Precision NDIR $\hbox{CO}_{2}$ Gas Sensor for Automotive Applications
,
2006,
IEEE Sensors Journal.
[2]
Samsul Bahari Mohd Noor,et al.
Traffic light fault detection system
,
2002
.
[3]
Vijay K. Varadan,et al.
A compact wireless gas sensor using a carbon nanotube/PMMA thin film chemiresistor
,
2004
.
[4]
Samsul Bahari Mohd Noor,et al.
Failure monitoring system of a traffic light
,
2002
.
[5]
Sang-Woo Ban,et al.
SnO/sub 2/ gas sensing array for combustible and explosive gas leakage recognition
,
2002
.