Space Propulsion via Spherical Torus Fusion Reactor

A conceptual vehicle design enabling fast outer solar system travel was produced predicated on a small aspect ratio spherical torus nuclear fusion reactor. Analysis revealed that the vehicle could deliver a 108 mt crew habitat payload to Saturn rendezvous in 204 days, with an initial mass in low Earth orbit of 1630 mt. Engineering conceptual design, analysis, and assessment were performed on all major systems including nuclear fusion reactor, magnetic nozzle, power conversion, fast wave plasma heating, fuel pellet injector, startup/re-start fission reactor and battery, and other systems. Detailed fusion reactor design included analysis of plasma characteristics, power balance and utilization, first wall, toroidal field coils, heat transfer, and neutron/X-ray radiation.

[1]  S. Jardin,et al.  Physics basis for the ARIES-ST power plant , 1999, 18th IEEE/NPSS Symposium on Fusion Engineering. Symposium Proceedings (Cat. No.99CH37050).

[2]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[3]  Engineering Design of the National Spherical Tokamak Experiment , 1996 .

[4]  J Powell,et al.  DEALS: a demountable externally anchored low stress superconducting magnet system for fusion reactors , 1977 .

[5]  S. Awaji,et al.  Crossover from intrinsic to extrinsic pinning for YBa2Cu3O7 films , 1999 .

[6]  Pavlos Mikellides,et al.  Gigawatt, quasi-steady plasma flow facility for fusion rocket simulations , 1998 .

[7]  Robert A. Krakowski,et al.  Projections for a steady-state tokamak reactor based on ITER , 1989 .

[9]  S. K. Borowski.  AIAA-87-1814 Comparison Of Fusion/ Antiproton Propulsion Systems For Interplanetary Travel , 1987 .

[10]  Harald W. Weber,et al.  Influence of fast neutron irradiation on critical currents and irreversibility lines in MPMG-processed YBa2Cu3O7 superconductors , 1993 .

[11]  Stanley K. Borowski,et al.  A spherical torus nuclear fusion reactor space propulsion vehicle concept for fast interplanetary piloted and robotic missions , 1999 .

[12]  Stanley K. Borowski,et al.  A Spherical Torus Nuclear Fusion Reactor Space Propulsion Vehicle Concept for Fast Interplanetary Travel , 1998 .

[13]  S. Borowski.  Inductive current startup in large tokamaks with expanding minor radius and rf assist , 1984 .

[14]  N. Ohyabu,et al.  A new poloidal-bundle divertor for a spherical tokamak , 2000 .

[15]  R. Goldfarb,et al.  Magnetic measurement of transport critical current density of granular superconductors. , 1993 .

[16]  Stanley Borowski,et al.  A comparison of fusion/antiproton propulsion systems for interplanetary travel , 1987 .

[17]  Stanley K. Borowski,et al.  Commercially-driven human interplanetary propulsion systems: Rationale, concept, technology, and performance requirements , 1996 .

[18]  D. Ehst,et al.  The radio-frequency current-drive system for the ARIES-I tokamak power reactor , 1994 .

[19]  Henryk Szymczak,et al.  Enhancement of critical current density in fast neutron irradiated melt-textured YBa2Cu3O7-x , 1993 .

[20]  Osamu Mitarai,et al.  Spin polarization effect on ignition access condition for D-T and D-3He Tokamak fusion reactors , 1992 .

[21]  J. Lamarsh.  Introduction to Nuclear Engineering , 1975 .

[22]  Alan H. Glasser,et al.  Characterization of Plasma Flow through Magnetic Nozzles , 1990 .

[23]  R. A. Hyde.  Laser-fusion rocket for interplanetary propulsion , 1983 .

[24]  Y-K.M. Peng,et al.  Radio-frequency-assisted current startup in the Fusion Engineering Device , 1984 .

[25]  G. W. Silke,et al.  Implications of Steady-State Operation on Divertor Design , 1996 .

[26]  G. Kulcinski,et al.  Lunar Source of 3He for Commercial Fusion Power , 1986 .

[27]  David A. Ehst,et al.  Current drive studies for the ARIES steady-state tokamak reactors , 1994 .

[28]  Craig Hamilton Williams.  An Analytic Approximation to Very High Specific Impulse and Specific Power Interplanetary Space Mission Analysis , 1995 .