Mechanical characterization of epoxy composite with multiscale reinforcements: Carbon nanotubes and short carbon fibers

Carbon nanotubes (CNT) and short carbon fibers were incorporated into an epoxy matrix to fabricate a high performance multiscale composite. To improve the stress transfer between epoxy and carbon fibers, CNT were also grown on fibers through chemical vapor deposition (CVD) method to produce CNT grown short carbon fibers (CSCF). Mechanical characterization of composites was performed to investigate the synergy effects of CNT and CSCF in the epoxy matrix. The multiscale composites revealed significant improvement in elastic and storage modulus, strength as well as impact resistance in comparison to CNT–epoxy or CSCF–epoxy composites. An optimum content of CNT was found which provided the maximum stiffness and strength. The synergic reinforcing effects of combined fillers were analyzed on the fracture surface of composites through optical and scanning electron microscopy (SEM).

[1]  M. Salleh,et al.  Carbon and glass hierarchical fibers: Influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites , 2013 .

[2]  I. Verpoest,et al.  Mechanical properties of epoxy composites reinforced with a low volume fraction of nanosilica fillers , 2013 .

[3]  G. Lubineau,et al.  Analysis of interlaminar fracture toughness and damage mechanisms in composite laminates reinforced with sprayed multi-walled carbon nanotubes , 2014 .

[4]  S. Jeelani,et al.  Influence of functionalization on properties of MWCNT-epoxy nanocomposites , 2011 .

[5]  N. A. Siddiqui,et al.  DISPERSION AND FUNCTIONALIZATION OF CARBON NANOTUBES FOR POLYMER-BASED NANOCOMPOSITES: A REVIEW , 2010 .

[6]  A. Sylvestre,et al.  Chemical vapor deposition synthesis of carbon nanotube-graphene nanosheet hybrids and their application in polymer composites. , 2012, Journal of nanoscience and nanotechnology.

[7]  J. Karger‐Kocsis,et al.  Synergetic effect of carbon nanofibers and short carbon fibers on the mechanical and fracture properties of epoxy resin , 2010 .

[8]  M. Giordano,et al.  Reinforcement efficiency of multi-walled carbon nanotube/epoxy nano composites , 2010 .

[9]  S. Du,et al.  Effect of amino-functionalization on the interfacial adhesion of multi-walled carbon nanotubes/epoxy nanocomposites , 2012 .

[10]  Wei Yang,et al.  Influence of multiwall carbon nanotubes on the morphology, melting, crystallization and mechanical properties of polyamide 6/acrylonitrile–butadiene–styrene blends , 2012 .

[11]  P. Moldenaers,et al.  Assessing the strengths and weaknesses of various types of pre-treatments of carbon nanotubes on the properties of polymer/carbon nanotubes composites: A critical review , 2010 .

[12]  P. Lamberti,et al.  Effect of functionalization on the thermo-mechanical and electrical behavior of multi-wall carbon nanotube/epoxy composites , 2011 .

[13]  R. Zahari,et al.  Synthesis of vertically aligned carbon nanotubes on carbon fiber , 2013 .

[14]  Jang‐Kyo Kim,et al.  Effects of silane functionalization on the properties of carbon nanotube/epoxy nanocomposites , 2007 .

[15]  D. Tasis,et al.  Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties , 2010 .

[16]  Hao-xuan Li,et al.  Experimental and numerical investigation of the position-dependent growth of carbon nanotube–alumina microparticle hybrid structures in a horizontal CVD reactor , 2011 .

[17]  D. Dean,et al.  Magnetically processed carbon nanotube/epoxy nanocomposites: Morphology, thermal, and mechanical properties , 2010 .

[18]  P. Herrera-Franco,et al.  Effective properties of multiwalled carbon nanotube/epoxy composites using two different tubes , 2008 .

[19]  M. Khakani,et al.  Manufacturing composite beams reinforced with three-dimensionally patterned-oriented carbon nanotubes through microfluidic infiltration , 2012 .

[20]  Z. Zhang,et al.  Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers , 2013 .

[21]  Yiping Guo,et al.  Effects of carbon nanotube functionalization on the mechanical and thermal properties of epoxy composites , 2009 .

[22]  Weikang Li,et al.  The influence of nano/micro hybrid structure on the mechanical and self-sensing properties of carbon nanotube-microparticle reinforced epoxy matrix composite , 2013 .

[23]  Gregory J. Ehlert,et al.  Carboxyl functionalization of carbon fibers through a grafting reaction that preserves fiber tensile strength , 2011 .

[24]  B. Satapathy,et al.  Designing tough and fracture resistant polypropylene/multi wall carbon nanotubes nanocomposites by controlling stereo-complexity and dispersion morphology , 2014 .

[25]  T. Tinçer,et al.  Matrix and interface modification of short carbon fiber-reinforced epoxy , 2005 .

[26]  N. Barkoula,et al.  Effect of dispersion conditions on the thermo-mechanical and toughness properties of multi walled carbon nanotubes-reinforced epoxy , 2012 .

[27]  Arash Montazeri,et al.  The effect of functionalization on the viscoelastic behavior of multi-wall carbon nanotube/epoxy composites , 2013 .

[28]  Hong‐Zhang Geng,et al.  Effect of functionalization of multi-walled carbon nanotube on the curing behavior and mechanical property of multi-walled carbon nanotube/epoxy composites , 2013 .

[29]  Xiao Hu,et al.  Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing , 1999 .

[30]  Anthony Dichiara,et al.  Carbon nanotube-graphene nanoplatelet hybrids as high-performance multifunctional reinforcements in epoxy composites , 2013 .

[31]  Wei Lin,et al.  The influence of treatment duration on multi-walled carbon nanotubes functionalized by H2SO4/HNO3 oxidation , 2011 .

[32]  Mohamad Amran Mohd Salleh,et al.  Effect of fibre coating and geometry on the tensile properties of hybrid carbon nanotube coated carbon fibre reinforced composite , 2014 .

[33]  B. Grady.  Carbon Nanotube-Polymer Composites: Manufacture, Properties, and Applications , 2011 .

[34]  B. S. Hadavand,et al.  Mechanical properties of multi-walled carbon nanotube/epoxy polysulfide nanocomposite , 2013 .

[35]  Wenbin Zhong,et al.  Mechanical and thermal properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes , 2008 .