Analysis of Torque in Friction Stir Welding of Aluminum Alloy 5052 by Inverse Problem Method

[1]  Guillermo Lombera,et al.  Modelado numérico del proceso de soldadura FSW incorporando una técnica de estimación de parámetros , 2014 .

[2]  Helcio R. B. Orlande,et al.  Inverse Problems in Heat Transfer: New Trends on Solution Methodologies and Applications , 2012 .

[3]  Jason E. Mitchell,et al.  Analysis of friction stir welds using thermocouple measurements , 2003 .

[4]  Xin Lin,et al.  An analytical model to optimize rotation speed and travel speed of friction stir welding for defect-free joints , 2013 .

[5]  A. De,et al.  Tool Geometry for Friction Stir Welding—Optimum Shoulder Diameter , 2011 .

[6]  Philip J. Withers,et al.  Dissimilar friction stir welds in AA5083-AA6082. Part I: Process parameter effects on thermal history and weld properties , 2006 .

[7]  R. Izamshah,et al.  Generated forces and heat during the critical stages of friction stir welding and processing , 2015 .

[8]  Anthony P. Reynolds,et al.  Torque, Power Requirement and Stir Zone Geometry in Friction Stir Welding Through Modeling and Experiments , 2009 .

[9]  Michael A. Sutton,et al.  Process–structure–property relationships for nugget and heat affected zone regions of AA2524–T351 friction stir welds , 2005 .

[10]  Nuno Mendes,et al.  Machines and control systems for friction stir welding: A review , 2016 .

[11]  Nicholas Zabaras,et al.  Inverse Problems in Heat Transfer , 2009 .

[12]  D. Rodrigues,et al.  Using torque sensitivity analysis in accessing Friction Stir Welding/Processing conditions , 2012 .

[13]  Joseph D. Robson,et al.  A model relating tool torque and its associated power and specific energy to rotation and forward speeds during friction stir welding/processing , 2010 .

[14]  Z. W. Chen,et al.  Effects of tool speeds and corresponding torque/energy on stir zone formation during friction stir welding/processing , 2009 .

[15]  Jesper Henri Hattel,et al.  An analytical model for the heat generation in friction stir welding , 2004 .

[16]  Aldo Braghini Junior,et al.  Modeling heat transfer in die milling , 2014 .

[17]  C. Muralidharan,et al.  Statistical analysis to predict grain size and hardness of the weld nugget of friction-stir-welded AA6061-T6 aluminium alloy joints , 2011 .

[18]  C. Muralidharan,et al.  Establishing Empirical Relationships to Predict Grain Size and Tensile Strength of Friction Stir Welded AA 6061-T6 Aluminium Alloy Joints , 2010 .

[19]  M. Mehta,et al.  Load bearing capacity of tool pin during friction stir welding , 2012 .

[20]  Alvin M. Strauss,et al.  Torque control of friction stir welding for manufacturing and automation , 2010 .

[21]  Xin Zhao,et al.  Design and Implementation of Nonlinear Force Controllers for Friction Stir Welding Processes , 2008 .

[22]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[23]  Thomas Pardoen,et al.  Integrated modeling of friction stir welding of 6xxx series Al alloys: Process, microstructure and properties , 2012 .

[24]  A. Reynolds,et al.  Effects of thermal boundary conditions in friction stir welded AA7050-T7 sheets , 2010 .

[25]  G. Singh,et al.  Modelling of the effect of process parameters on tensile strength of friction stir welded aluminium alloy joints , 2014, Experimental Techniques.

[26]  J. Indacochea,et al.  Microstructural Assessment of Copper Friction Stir Welds , 2009 .

[27]  Alvin M. Strauss,et al.  Friction stir welding: Process, automation, and control , 2014 .

[28]  Z. Zhang,et al.  Solid mechanics-based Eulerian model of friction stir welding , 2014 .

[29]  Keith A. Woodbury,et al.  Filter solution of inverse heat conduction problem using measured temperature history as remote boundary condition , 2014 .

[30]  Yue-Tzu Yang,et al.  A Three-Dimensional Inverse Problem of Estimating the Surface Thermal Behavior of the Working Roll in Rolling Process , 2000 .

[31]  Jamil A. Khan,et al.  Prediction of temperature distribution and thermal history during friction stir welding: input torque based model , 2003 .

[32]  Carl D. Sorensen,et al.  Torque based weld power model for friction stir welding , 2007 .

[33]  Murray W. Mahoney,et al.  Effects of friction stir welding on microstructure of 7075 aluminum , 1997 .

[34]  Xunliang Liu,et al.  Experimental study on heat-transfer characteristics of circular water jet impinging on high-temperature stainless steel plate , 2014 .

[35]  Direct and Inverse Problems Solutions in Micro-Scale Forced Convection , 2010 .

[36]  H. Bhadeshia,et al.  Recent advances in friction-stir welding : Process, weldment structure and properties , 2008 .

[37]  K. Chatterjee,et al.  Monitoring torque and traverse force in friction stir welding from input electrical signatures of driving motors , 2013 .

[38]  M. N. Özişik,et al.  Effects of the Heating Process and Body Dimensions on the Estimation of the Thermal Conductivity Components of Orthotropic Solids , 2003 .

[39]  H. Orlande,et al.  A COMPARISON OF DIFFERENT PARAMETER ESTIMATION TECHNIQUES FOR THE IDENTIFICATION OF THERMAL CONDUCTIVITY COMPONENTS OF ORTHOTROPIC SOLIDS , 1999 .

[40]  M. W. Mahoney,et al.  Properties of friction-stir-welded 7075 T651 aluminum , 1998 .

[41]  Anthony P. Reynolds,et al.  Process response parameter relationships in aluminium alloy friction stir welds , 2007 .