Optimal design of passive tuned filters for time-varying non-linear loads

This paper presents a new method for designing passive filters by using a minimization technique for time-varying nonlinear loads. The proposed procedure takes into account the non-convex behavior of any objective function in case of considering harmonics below the tuned frequencies of the filters. Hence, it is always assured that the optimal filter is obtained with respect to an optimization criterion. The method is completed with additional restrictions, which consider the position of the resonances introduced by the filters and the injected fundamental reactive power. Applying these restrictions, the designed filters are immunized against the parameter changes. Moreover, the facility including the passive filters does not inject fundamental reactive power to the power system.

[1]  Paolo Mattavelli Design aspects of harmonic filters for high-power AC/DC converters , 2000, 2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134).

[2]  A. E. Emanuel,et al.  Passive shunt harmonic filters for low and medium voltage: a cost comparison study , 1996 .

[3]  B. Maundy,et al.  Discussion of "An optimization based method for selection of resonant harmonic filter branch parameters" , 2003 .

[4]  D. A. Gonzalez,et al.  Design of Filters to Reduce Harmonic Distortion in Industrial Power Systems , 1987, IEEE Transactions on Industry Applications.

[5]  Alessandro Ferrero,et al.  A new approach to the definition of power components in three-phase systems under nonsinusoidal conditions , 1991 .

[6]  R. P. Stratford,et al.  Reactive Compensation and Harmonic Suppression for Industrial Power Systems Using Thyristor Converters , 1976, IEEE Transactions on Industry Applications.

[7]  H.L. Ginn,et al.  An optimization based method for selection of resonant harmonic filter branch parameters , 2006, IEEE Transactions on Power Delivery.

[8]  Jose M. Maza-Ortega,et al.  A software-based tool for optimal design of passive tuned filters , 2010, 2010 IEEE International Symposium on Industrial Electronics.

[9]  Leszek S. Czarnecki,et al.  Effectiveness of resonant harmonic filters and its improvement , 2000, 2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134).

[10]  M. Burgos Payán,et al.  A new design method of passive tuned filters for harmonic mitigation and reactive power compensation , 2006 .

[11]  L. S. Czarnecki Common and fixed-poles resonant harmonic filters , 2007 .

[12]  Leszek S. Czarnecki,et al.  An overview of methods of harmonic suppression in distribution systems , 2000, 2000 Power Engineering Society Summer Meeting (Cat. No.00CH37134).

[13]  Kun-Ping Lin,et al.  An advanced computer code for single-tuned harmonic filter design , 1997, 1997 IEEE Industrial and Commercial Power Systems Technical Conference. Conference Record.