Crack growth behavior of a biomedical polymer-ceramic interpenetrating scaffolds composite in the subcritical regimen
暂无分享,去创建一个
[1] M. Kaizer,et al. Sliding contact wear and subsurface damage of CAD/CAM materials against zirconia. , 2020, Dental materials : official publication of the Academy of Dental Materials.
[2] R. Belli,et al. Rising R-curves in particulate/fiber-reinforced resin composite layered systems. , 2019, Journal of the mechanical behavior of biomedical materials.
[3] G. Quinn,et al. Fracture Toughness of Modern and Ancient Glasses and Glass Ceramics as Measured by the SEPB Method , 2019, Proceeding of the 42nd International Conference on Advanced Ceramics and Composites.
[4] R. Belli,et al. Fracture toughness testing of biomedical ceramic-based materials using beams, plates and discs , 2018, Journal of the European Ceramic Society.
[5] Katharina Werbach,et al. Fracture anisotropy in texturized lithium disilicate glass-ceramics , 2018 .
[6] T. Fey,et al. Resistance curves of short-fiber reinforced methacrylate-based biomedical composites , 2017 .
[7] N. C. Ramos,et al. Microstructure characterization and SCG of newly engineered dental ceramics. , 2016, Dental materials : official publication of the Academy of Dental Materials.
[8] J. Fischer,et al. Loading capacity of zirconia implant supported hybrid ceramic crowns. , 2015, Dental materials : official publication of the Academy of Dental Materials.
[9] M. Swain,et al. Damage tolerance of indirect restorative materials (including PICN) after simulated bur adjustments. , 2015, Dental materials : official publication of the Academy of Dental Materials.
[10] Á. Della Bona,et al. Characterization of a polymer-infiltrated ceramic-network material. , 2014, Dental materials : official publication of the Academy of Dental Materials.
[11] Norbert Thiel,et al. In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation. , 2013, Journal of the mechanical behavior of biomedical materials.
[12] Norbert Thiel,et al. Mechanical properties of polymer-infiltrated-ceramic-network materials. , 2013, Dental materials : official publication of the Academy of Dental Materials.
[13] T. Fett. New Contributions to R-Curves and Bridging Stresses - Applications of weight functions , 2012 .
[14] Thomas Böhlke,et al. Mechanisms of toughening in silicon nitrides: The roles of crack bridging and microstructure , 2011 .
[15] T. Fett,et al. Estimation of the High‐Temperature R Curve for Ceramics from Strength Measurements Including Specimens with Focused Ion Beam Notches , 2010 .
[16] J. W. Foulk,et al. On the toughening of brittle materials by grain bridging: promoting intergranular fracture through grain angle, strength, and toughness , 2008 .
[17] R. M. Cannon,et al. The Utility of R‐Curves for Understanding Fracture Toughness‐Strength Relations in Bridging Ceramics , 2008 .
[18] Robert Danzer,et al. Fracture of Ceramics , 2008 .
[19] Robert Danzer,et al. Fracture statistics of ceramics – Weibull statistics and deviations from Weibull statistics , 2007 .
[20] R. Bradt,et al. On the Vickers Indentation Fracture Toughness Test , 2007 .
[21] R. Danzer,et al. Biaxial Tensile Strength Test for Brittle Rectangular Plates , 2006 .
[22] D. Munz,et al. Fatigue failure of coarse‐grained alumina under contact loading , 2005 .
[23] G. Quinn,et al. Effect of Lateral Cracks on Fracture Toughness Determined by the Surface‐Crack‐in‐Flexure Method , 2004 .
[24] Robert Danzer,et al. The ball on three balls test for strength testing of brittle discs: stress distribution in the disc , 2002 .
[25] Theo Fett,et al. R-Curve for a Lead Zirconate Titanate Ceramic Obtained from Tensile Strength Tests with Knoop-Damaged Specimens , 2000 .
[26] Theo Fett,et al. Differences between static and cyclic fatigue effects in alumina , 1993 .
[27] T. Fett,et al. Determination of da/dN-ΔK1 curves for small cracks in alumina in alternating bending tests , 1991 .
[28] D. Munz,et al. Determination of v‐K1 Curves by a Modified Evaluation of Lifetime Measurements in Static Bending Tests , 1985 .
[29] A. G. Evans,et al. Crack propagation in ceramic materials under cyclic loading conditions , 1974, Metallurgical and Materials Transactions B.
[30] D. de Ligny,et al. Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization. , 2017, Dental materials : official publication of the Academy of Dental Materials.
[31] R. Danzer,et al. Chairside CAD/CAM materials. Part 2: Flexural strength testing. , 2017, Dental materials : official publication of the Academy of Dental Materials.
[32] M. Swain,et al. Interpenetrating network ceramic-resin composite dental restorative materials. , 2016, Dental materials : official publication of the Academy of Dental Materials.
[33] T. Nindhia,et al. A Fracture Toughness Test Using the Ball‐on‐Three‐Balls Test , 2016 .
[34] G. Quinn. On edge chipping testing and some personal perspectives on the state of the art of mechanical testing. , 2015, Dental materials : official publication of the Academy of Dental Materials.
[35] Robert Danzer,et al. Some notes on the correlation between fracture and defect statistics: Are Weibull statistics valid for very small specimens? , 2006 .