Mesoporous titanium and niobium nitrides as conductive and stable electrocatalyst supports in acid environments.

The stability of carbon-based catalyst supports represents one of the biggest challenges for the commercialisation of proton-exchange membrane fuel cells (PEMFCs). Metal nitrides are an attractive alternative to carbon-based supports, owing to their high bulk conductivity and acid stability. We report the electrochemical stability evaluation of high-surface-area metal nitrides in acidic electrolytes. Three-dimensional mesoporous titanium (TiN) and niobium nitride (NbN) thin films were prepared using block copolymer self-assembly and were evaluated without using any conductive carbon additives or a carbon-based substrate. Both TiN and NbN are stable and maintain conductivity in acidic electrolytes up to at least 0.85 V (NbN) and 1.4 V (TiN) vs. reversible hydrogen electrode (RHE) after 2000 cycles. We also deposited platinum on the TiN films and demonstrate the expected cyclic voltammogram features, indicating the nitride's utility as a catalyst support.

[1]  S. Liao,et al.  Transition Metal Nitride Coated with Atomic Layers of Pt as a Low-Cost, Highly Stable Electrocatalyst for the Oxygen Reduction Reaction. , 2016, Journal of the American Chemical Society.

[2]  Sol M Gruner,et al.  Block copolymer self-assembly–directed synthesis of mesoporous gyroidal superconductors , 2016, Science Advances.

[3]  S. Nam,et al.  Highly efficient and durable TiN nanofiber electrocatalyst supports. , 2015, Nanoscale.

[4]  S. Liao,et al.  Binary transition metal nitrides with enhanced activity and durability for the oxygen reduction reaction , 2015 .

[5]  Thomas F. Jaramillo,et al.  Correction: Substrate Selection for Fundamental Studies of Electrocatalysts and Photoelectrodes: Inert Potential Windows in Acidic, Neutral, and Basic Electrolyte , 2015, PloS one.

[6]  Z. Pan,et al.  Robust non-carbon titanium nitride nanotubes supported Pt catalyst with enhanced catalytic activity and durability for methanol oxidation reaction , 2014 .

[7]  S. Gruner,et al.  Monolithic Gyroidal Mesoporous Mixed Titanium–Niobium Nitrides , 2014, ACS nano.

[8]  Z. Pan,et al.  Hollow and porous titanium nitride nanotubes as high-performance catalyst supports for oxygen reduction reaction , 2014 .

[9]  C. Beeck,et al.  Quantitative Trait Loci for Thermal Time to Flowering and Photoperiod Responsiveness Discovered in Summer Annual-Type Brassica napus L , 2014, PloS one.

[10]  N. Alonso‐Vante,et al.  Mixed-oxide Ti1-xWxO2 as support for (photo)-electrochemical processes , 2014 .

[11]  T. Venkatesan,et al.  Oxygen electrocatalysis on (001)-oriented manganese perovskite films: Mn valency and charge transfer at the nanoscale , 2013 .

[12]  Minghui Yang,et al.  Mesoporous titanium nitride supported Pt nanoparticles as high performance catalysts for methanol electrooxidation. , 2013, Physical chemistry chemical physics : PCCP.

[13]  D. Wilkinson,et al.  Nanopillar niobium oxides as support structures for oxygen reduction electrocatalysts , 2012 .

[14]  M. Watanabe,et al.  Preparation of titanium nitride-supported platinum catalysts with well controlled morphology and their properties relevant to polymer electrolyte fuel cells , 2012 .

[15]  N. Yufa,et al.  Triblock‐Terpolymer‐Directed Self‐Assembly of Mesoporous TiO2: High‐Performance Photoanodes for Solid‐State Dye‐Sensitized Solar Cells , 2012 .

[16]  Ja-Yeon Choi,et al.  Titanium nitride–carbon nanotube core–shell composites as effective electrocatalyst supports for low temperature fuel cells , 2012 .

[17]  D. Choi,et al.  Synthesis and Characterization of Nanostructured Niobium and Molybdenum Nitrides by a Two‐Step Transition Metal Halide Approach , 2011 .

[18]  B. Hwang,et al.  Nanostructured Ti(0.7)Mo(0.3)O2 support enhances electron transfer to Pt: high-performance catalyst for oxygen reduction reaction. , 2011, Journal of the American Chemical Society.

[19]  Ulrich Wiesner,et al.  Block copolymer based composition and morphology control in nanostructured hybrid materials for energy conversion and storage: solar cells, batteries, and fuel cells. , 2011, Chemical Society reviews.

[20]  Qin Zhou,et al.  Sol-gel synthesis, electrochemical characterization, and stability testing of Ti(0.7)W(0.3)O2 nanoparticles for catalyst support applications in proton-exchange membrane fuel cells. , 2010, Journal of the American Chemical Society.

[21]  P. Strasser,et al.  Activity, stability and degradation of multi walled carbon nanotube (MWCNT) supported Pt fuel cell electrocatalysts. , 2010, Physical chemistry chemical physics : PCCP.

[22]  B. Popov,et al.  Titania Supported Platinum Catalyst with High Electrocatalytic Activity and Stability for Polymer Electrolyte Membrane Fuel Cell , 2010, ECS Transactions.

[23]  Songhun Yoon,et al.  Ordered mesoporous WO3−X possessing electronically conductive framework comparable to carbon framework toward long-term stable cathode supports for fuel cells , 2010 .

[24]  Eric D. Rus,et al.  Highly stable and CO-tolerant Pt/Ti0.7W0.3O2 electrocatalyst for proton-exchange membrane fuel cells. , 2010, Journal of the American Chemical Society.

[25]  Jiujun Zhang,et al.  Pt nanoparticles deposited on TiO2 based nanofibers: Electrochemical stability and oxygen reduction activity , 2010 .

[26]  B. Popov,et al.  Electrocatalytic activity and stability of niobium-doped titanium oxide supported platinum catalyst for polymer electrolyte membrane fuel cells , 2010 .

[27]  Kohei Ito,et al.  Carbon-free pt electrocatalysts supported on SnO2 for polymer electrolyte fuel cells , 2009 .

[28]  H. Abruña,et al.  One-pot synthesis of platinum-based nanoparticles incorporated into mesoporous niobium oxide-carbon composites for fuel cell electrodes. , 2009, Journal of the American Chemical Society.

[29]  E. Antolini.  Carbon supports for low-temperature fuel cell catalysts , 2009 .

[30]  Wenzheng Li,et al.  Titanium nitride nanoparticles based electrocatalysts for proton exchange membrane fuel cells , 2009 .

[31]  Tsutomu Ioroi,et al.  Stability of Corrosion-Resistant Magnéli-Phase Ti4O7-Supported PEMFC Catalysts at High Potentials , 2008 .

[32]  Jinwoo Lee,et al.  Direct access to thermally stable and highly crystalline mesoporous transition-metal oxides with uniform pores. , 2008, Nature materials.

[33]  Hubert A. Gasteiger,et al.  Start/Stop and Local H2 Starvation Mechanisms of Carbon Corrosion: Model vs. Experiment , 2007 .

[34]  Hubert A. Gasteiger,et al.  The Impact of Carbon Stability on PEM Fuel Cell Startup and Shutdown Voltage Degradation , 2006 .

[35]  Robert M. Darling,et al.  Model of Carbon Corrosion in PEM Fuel Cells , 2006 .

[36]  Zhongwei Chen,et al.  Durability investigation of carbon nanotube as catalyst support for proton exchange membrane fuel cell , 2006 .

[37]  L. J. Bregoli,et al.  A Reverse-Current Decay Mechanism for Fuel Cells , 2005 .

[38]  Tsutomu Ioroi,et al.  Sub-stoichiometric titanium oxide-supported platinum electrocatalyst for polymer electrolyte fuel cells , 2005 .

[39]  Guoying Chen,et al.  DEVELOPMENT OF SUPPORTED BIFUNCTIONAL ELECTROCATALYSTS FOR UNITIZED REGENERATIVE FUEL CELLS , 2002 .

[40]  D. Pletcher,et al.  Electrode coatings from sprayed titanium dioxide nanoparticles – behaviour in NaOH solutions , 2001 .

[41]  U. Wiesner,et al.  Organically modified aluminosilicate mesostructures from block copolymer phases , 1997, Science.

[42]  S. Oyama,et al.  The Chemistry of Transition Metal Carbides and Nitrides , 1996 .

[43]  H. Nasu,et al.  Preparation of NbN fibres by nitridation of sol-gel derived Nb2O5 fibres , 1994 .

[44]  Kanichi Kamiya,et al.  Nitridation of the Sol–Gel-Derived Titanium Oxide Films by Heating in Ammonia Gas , 1990 .

[45]  M. Pourbaix.  Atlas of Electrochemical Equilibria in Aqueous Solutions , 1974 .

[46]  G. Brauer.  Nitrides, carbonitrides and oxynitrides of niobium , 1960 .

[47]  Ulrich Wiesner,et al.  Block copolymer-nanoparticle hybrid self-assembly , 2015 .

[48]  V. Percec.  Hierarchical Macromolecular Structures: 60 Years after the Staudinger Nobel Prize I , 2013 .

[49]  T. Jarvi,et al.  Electrocatalytic corrosion of carbon support in PEMFC cathodes , 2004 .