Operation of polymer electrolyte membrane fuel cells with dry feeds: Design and operating strategies

The operation of polymer electrolyte membrane fuel cells (PEMFCs) with dry feeds has been examined with different fuel cell flow channel designs as functions of pressure, temperature and flow rate. Auto-humidified (or self-humidifying) PEMFC operation is improved at higher pressures and low gas velocities where axial dispersion enhances back-mixing of the product water with the dry feed. We demonstrate auto-humidified operation of the channel-less, self-draining fuel cell, based on a stirred tank reactor; data is presented showing auto-humidified operation from 25 to 115 degrees C at 1 and 3 atm. Design and operating requirements are derived for the auto-humidified operation of the channel-less, self-draining fuel cell. The auto-humidified self-draining fuel cell outperforms a fully humidified serpentine flow channel fuel cell at high current densities. The new design offers substantial benefits for simplicity of operation and control including: the ability to self-drain reducing flooding, the ability to uniformly disperse water removing current gradients and the ability to operate on dry feeds eliminating the need for humidifiers. Additionally, the design lends itself well to a modular design concept. (c) 2005 Elsevier B.V. All rights reserved.

[1]  Zhigang Qi,et al.  PEM fuel cell stacks operated under dry-reactant conditions , 2002 .

[2]  S. Srinivasan,et al.  A comparison of physical properties and fuel cell performance of Nafion and zirconium phosphate/Nafion composite membranes , 2003, physics/0310029.

[3]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[4]  Chang-Soo Kim,et al.  Water transport in polymer membranes for PEMFC , 2000 .

[5]  Ravindra Datta,et al.  Systematic Approach to Design Higher Temperature Composite PEMs , 2005 .

[6]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[7]  James M. Fenton,et al.  Operation of Nafion®-based PEM fuel cells with no external humidification: influence of operating conditions and gas diffusion layers , 2004 .

[8]  K. S. Dhathathreyan,et al.  Water transport characteristics of polymer electrolyte membrane fuel cell , 2004 .

[9]  I. Kevrekidis,et al.  Water balance and multiplicity in a polymer electrolyte membrane fuel cell , 2004 .

[10]  David Blackwell,et al.  Water flow in the gas diffusion layer of PEM fuel cells , 2005 .

[11]  Gao Qing Lu,et al.  Solid acid membranes for high temperature (¿140° C) proton exchange membrane fuel cells , 2005 .

[12]  B. Steele.  Materials for high-temperature fuel cells , 1996, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[13]  Chao-Yang Wang,et al.  Liquid Water Transport in Gas Diffusion Layer of Polymer Electrolyte Fuel Cells , 2004 .

[14]  Minking K. Chyu,et al.  Novel gas distributors and optimization for high power density in fuel cells , 2005 .

[15]  H. Gasteiger.  Fundamental Research and Development Challenges in Polymer Electrolyte Fuel Cell Technology , 2002 .

[16]  Christopher Hebling,et al.  A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding , 2004 .

[17]  Nick Burke,et al.  Simultaneous Measurements of Species and Current Distributions in a PEFC under Low-Humidity Operation , 2005 .

[18]  A. Weber,et al.  Modeling transport in polymer-electrolyte fuel cells. , 2004, Chemical reviews.

[19]  I. G. Kevrekidis,et al.  The stirred tank reactor polymer electrolyte membrane fuel cell , 2003 .

[20]  Paul M. Grant,et al.  Hydrogen lifts off — with a heavy load , 2003, Nature.

[21]  C. Yanga,et al.  Approaches and technical challenges to high temperature operation of proton exchange membrane fuel cells , 2001 .

[22]  Ioannis G. Kevrekidis,et al.  The dynamic response of PEM fuel cells to changes in load , 2005 .

[23]  G. Janssen,et al.  A Phenomenological Model of Water Transport in a Proton Exchange Membrane Fuel Cell , 2001 .

[24]  O. Savadogo.  Emerging membranes for electrochemical systems: Part II. High temperature composite membranes for polymer electrolyte fuel cell (PEFC) applications☆ , 2004 .

[25]  Sonia Tulyani,et al.  Steady-state multiplicity in the autohumidification polymer electrolyte membrane fuel cell , 2003 .

[26]  T. Nguyen,et al.  A liquid water management strategy for PEM fuel cell stacks , 2003 .