Numerical study of the effects of heat transfer methods on CH4/(CH4 + H2)-AIR pre-mixed flames in a micro-stepped tube

In this study, an approach to modification and improvement of CH4/air pre-mixed flame in a micro-stepped tube is numerically studied. The effects of added hydrogen to methane as an additive, entrance mixture velocity and some physical properties such as the micro-stepped tube wall thermal conductivity and the outer wall convective and radiative heat transfer coefficients on temperature distribution and combustion progress in a micro-stepped tube are calculated using a high order, high accuracy 2D numerical laminar steady state code. The results show that adding hydrogen to methane in a micro-stepped tube can play a pivotal role in modification processes of combustion phenomena in a micro combustor. Also, it is found that adding hydrogen to CH4 can assure the flame presence in some certain conditions in comparison to the simple backward facing step method. Moreover, adding hydrogen can improve the concentration of the combustion vital radicals and also temperature distribution along the micro combustor, impressively. In this regard, adding hydrogen to methane as an additive sustains the combustion vital radicals against the variation of the heat transfer conditions in or around a micro-combustor.

[1]  A. Fan,et al.  Splitting flames in a narrow channel with a temperature gradient in the walls , 2009 .

[2]  Bo Feng,et al.  The development of a micropower (micro-thermophotovoltaic) device , 2007 .

[3]  K. Maruta,et al.  A numerical study on propagation of premixed flames in small tubes , 2006 .

[4]  Oh Chae Kwon,et al.  Stability limits of premixed microflames at elevated temperatures , 2006 .

[5]  Meng-Jing Wu,et al.  Numerical simulation of the combustion of hydrogen–air mixture in micro-scaled chambers. Part I: Fundamental study , 2005 .

[6]  Yiguang Ju,et al.  An analysis of sub-limit flame dynamics using opposite propagating flames in mesoscale channels , 2003 .

[7]  D. G. Norton,et al.  A CFD study of propane/air microflame stability , 2004 .

[8]  Takuya Kataoka,et al.  Characteristics of combustion in a narrow channel with a temperature gradient , 2005 .

[9]  Dimitrios C. Kyritsis,et al.  Flames in narrow circular tubes , 2007 .

[10]  Yei-Chin Chao,et al.  Effects of catalytic walls on hydrogen/air combustion inside a micro-tube , 2007 .

[11]  Jl L. Xu,et al.  Thermal performance of a micro-combustor for micro-gas turbine system , 2007 .

[12]  Elaine S. Oran,et al.  Numerical Simulation of Reactive Flow , 1987 .

[13]  H. Moon,et al.  An annulus-type micro reforming system integrated with a two-staged micro-combustor , 2010 .

[14]  C. Shu,et al.  Characteristics of premixed flame in microcombustors with different diameters , 2005 .

[15]  Kefa Cen,et al.  Effects of hydrogen addition on methane catalytic combustion in a microtube , 2007 .

[16]  Robert W. Dibble,et al.  Combustion: Physical and Chemical Fundamentals, Modelling and Simulation, Experiments, Pollutant Formation , 1996 .

[17]  Wenming Yang,et al.  Characterization of wall temperature and radiation power through cylindrical dump micro-combustors , 2009 .

[18]  D. G. Norton,et al.  Modeling of high-temperature microburners , 2002 .

[19]  Liudi Jiang,et al.  Effect of finite heat input on the power performance of micro heat engines , 2011 .

[20]  D. Vlachos,et al.  Extending the region of stable homogeneous micro-combustion through forced unsteady operation , 2007 .

[21]  Yueh-Heng Li,et al.  Combustion characteristics of a small-scale combustor with a percolated platinum emitter tube for thermophotovoltaics , 2013 .

[22]  Timo Siikonen,et al.  MODIFIED SIMPLE FORMULATION ON A COLLOCATED GRID WITH AN ASSESSMENT OF THE SIMPLIFIED QUICK SCHEME , 1996 .

[23]  D. Kyritsis,et al.  Operational regimes of rich methane and propane/oxygen flames in mesoscale non-adiabatic ducts , 2009 .

[24]  Sejin Kwon,et al.  Effects of thermal and chemical surface–flame interaction on flame quenching , 2006 .

[25]  Wei Liu,et al.  Regime diagrams and characteristics of flame patterns in radial microchannels with temperature gradients , 2008 .

[26]  R. Reid,et al.  The Properties of Gases and Liquids , 1977 .

[27]  Yei-Chin Chao,et al.  Enhancement of hydrogen reaction in a micro-channel by catalyst segmentation , 2008 .

[28]  Wenming Yang,et al.  A numerical study on premixed micro-combustion of CH4–air mixture: Effects of combustor size, geometry and boundary conditions on flame temperature , 2009 .

[29]  Wenming Yang,et al.  Study on premixed combustion in cylindrical micro combustors: Transient flame behavior and wall heat flux , 2009 .

[30]  Paul D. Ronney,et al.  Numerical modeling of non-adiabatic heat-recirculating combustors , 2007 .

[31]  Debi Prasad Mishra,et al.  Numerical characterization of a premixed flame based annular microcombustor , 2010 .

[32]  D. G. Norton,et al.  Combustion characteristics and flame stability at the microscale: a CFD study of premixed methane/air mixtures , 2003 .

[33]  Yueh-Heng Li,et al.  Enhancement of methane combustion in microchannels: Effects of catalyst segmentation and cavities , 2010 .

[34]  Christopher P. Cadou,et al.  The role of structural heat exchange and heat loss in the design of efficient silicon micro-combustors , 2005 .

[35]  P. Cheng,et al.  Analytical and experimental study of premixed methane-air flame propagation in narrow channels , 2007 .

[36]  D. Vlachos,et al.  Optimal reactor dimensions for homogeneous combustion in small channels , 2007 .

[37]  Gennaro Russo,et al.  A novel catalytic-homogenous micro-combustor , 2009 .

[38]  D. Vlachos,et al.  A computational fluid dynamics study of propane/air microflame stability in a heat recirculation reactor , 2008 .

[39]  Wenming Yang,et al.  Effects of major parameters on micro-combustion for thermophotovoltaic energy conversion , 2007 .