Effect of surface treatment and functionalization on the ITO properties for OLEDs

The relation between ITO morphology and surface properties has been studied by wettability measurements and AFM microscopy. Different wet cleaning procedures have been investigated leading to different surface properties: ultrasonic degreasing, RCA and Aqua regia treatment. After full elimination of the organic surface contaminants, the ITO surface shows a main basic surface component. RCA and Aqua regia treatments are the most efficient techniques for cleaning ITO surfaces from organic contamination. Nevertheless, Aqua regia treatment induces ITO surface degradation, which is evidenced by AFM observations and resistance sheet measurements. The ITO surface has been derivatized with a SAM layer of phosphonic acid to improve the ITO/polymer interface. Effect of 2-chloroethylphosphonic acid layer on the different components of the surface energy was determined: acid component is increased whereas basic component is decreased, showing the good coverage of the ITO surface by the SAM layer. A more compact coating of POMX polymer is obtained after SAM functionalization of ITO samples cleaned with RCA treatment.

[1]  A. Kahn,et al.  Controlling the work function of indium tin oxide: differentiating dipolar from local surface effects. , 2002, Journal of the American Chemical Society.

[2]  A. Ulman,et al.  Formation and Structure of Self-Assembled Monolayers. , 1996, Chemical reviews.

[3]  J. Fréchet,et al.  Surface‐Confined Light Harvesting, Energy Transfer, and Amplification of Fluorescence Emission in Chromophore‐Labeled Self‐Assembled Monolayers , 2000 .

[4]  R. Friend,et al.  Surface and bulk phenomena in conjugated polymers devices , 2000 .

[5]  Bernard Kippelen,et al.  Interface modification of ITO thin films: organic photovoltaic cells , 2003 .

[6]  T. Marks,et al.  Patterned Luminescence of Organic Light-Emitting Diodes by Hot Microcontact Printing (HμCP) of Self-Assembled Monolayers , 2000 .

[7]  Chun-Guey Wu,et al.  Electroless surface polymerization of polyaniline films on aniline primed ITO electrodes: a simple method to fabricate good modified anodes for polymeric light emitting diodes , 2001 .

[8]  C. C. Wu,et al.  Surface modification of indium tin oxide by plasma treatment: An effective method to improve the efficiency, brightness, and reliability of organic light emitting devices , 1997 .

[9]  Shigeo Fujita,et al.  Surface Treatment of Indium-Tin-Oxide Substrates and Its Effects on Initial Nucleation Processes of Diamine Films , 1997 .

[10]  Dominique Vuillaume,et al.  Low-voltage, 30 nm channel length, organic transistors with a self-assembled monolayer as gate insulating films , 2000 .

[11]  Franco Cacialli,et al.  Indium-tin oxide treatments for single- and double-layer polymeric light-emitting diodes: The relation between the anode physical, chemical, and morphological properties and the device performance , 1998 .

[12]  G. Zotti,et al.  Adsorption of Carboxyl-Terminated Dithiophene and Terthiophene Molecules on ITO Electrodes and Their Electrochemical Coupling to Polymer Layers. The Influence of Molecular Geometry , 1998 .

[13]  Joseph Shinar,et al.  Effects of aquaregia treatment of indium-tin-oxide substrates on the behavior of double layered organic light-emitting diodes , 1997 .

[14]  N. Jaffrezic,et al.  Injection modifications by ITO functionalization with a self-assembled monolayer in OLEDs , 2003 .

[15]  M. Matsumura,et al.  Effect of a plasma treatment of ITO on the performance of organic electroluminescent devices , 1997 .

[16]  A. Wee,et al.  Effect of hydrogen partial pressure on optoelectronic properties of indium tin oxide thin films deposited by radio frequency magnetron sputtering method , 1999 .

[17]  Martin R. Willis,et al.  Organic electroluminescent devices: enhanced carrier injection using SAM derivatized ITO electrodes , 2000 .

[18]  Martin R. Willis,et al.  Organic electroluminescent devices: enhanced carrier injection using an organosilane self assembled monolayer (SAM) derivatized ITO electrode , 2001 .

[19]  Franco Cacialli,et al.  Molecular-scale interface engineering for polymer light-emitting diodes , 2000, Nature.

[20]  H. Lee,et al.  Tailoring of self-assembled monolayer for polymer light-emitting diodes , 2001 .

[21]  K. Chopra,et al.  Transparent conductors—A status review , 1983 .

[22]  Andrew T. S. Wee,et al.  Investigation of annealing effects on indium tin oxide thin films by electron energy loss spectroscopy , 2000 .