Temperature Dependence of Mechanical, Electrical Properties and Crystal Structure of Polyethylene Blends for Cable Insulation

There is a long-standing puzzle concerning whether polyethylene blends are a suitable substitution for cable-insulation-used crosslinking polyethylene (XLPE) especially at elevated temperatures. In this paper, we investigate temperature dependence of mechanical, electrical properties of blends with 70 wt % linear low density polyethylene (LLDPE) and 30 wt % high density polyethylene (HDPE) (abbreviated as 70 L-30 H). Our results show that the dielectric loss of 70 L-30 H is about an order of magnitude lower than XLPE, and the AC breakdown strength is 22% higher than XLPE at 90 °C. Moreover, the dynamic mechanical thermal analysis (DMA) measurement and hot set tests suggest that the blends shows optimal mechanical properties especially at high temperature with considerable temperature stability. Further scanning electron microscope (SEM) observation and X-ray diffraction (XRD) analysis uncover the reason for the excellent high temperature performance and temperature stability, which can be ascribed to the uniform fine-spherulite structure in 70 L-30 H blends with high crystallinity sustaining at high temperature. Therefore, our findings may enable the potential application of the blends as cable insulation material with higher thermal-endurance ability.

[1]  Gary STEVENS,et al.  NEW LIFE CYCLE COSTING AND RISK APPROACHES TO ASSET INVESTMENT AND PLANNING , 2011 .

[2]  Gary C. Stevens,et al.  Integrated Development and Assessment of New Thermoplastic High Voltage Power Cable Systems , 2012 .

[3]  J. Shea.  Electrical Properties of Polymers, 2nd edition [Book Review] , 2007, IEEE Electrical Insulation Magazine.

[4]  M. Wolcott,et al.  Facile Fabrication of 100% Bio-Based and Degradable Ternary Cellulose/PHBV/PLA Composites , 2018, Materials.

[5]  J. Fothergill.  Filamentary electromechanical breakdown , 1991 .

[6]  K. Stark,et al.  Electric Strength of Irradiated Polythene , 1955, Nature.

[7]  Electrical and Mechanical Properties of new Recyclable Power Cable Insulation Materials based upon Polyethylene Blends , 2011 .

[8]  Wei Yang,et al.  Fracture behavior of bimodal polyethylene: Effect of molecular weight distribution characteristics , 2011 .

[9]  Jun Hu,et al.  Evaluation of polypropylene/polyolefin elastomer blends for potential recyclable HVDC cable insulation applications , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[10]  A. Salehabadi,et al.  Effect of Organo-Modified Nanoclay on the Thermal and Bulk Structural Properties of Poly(3-hydroxybutyrate)-Epoxidized Natural Rubber Blends: Formation of Multi-Components Biobased Nanohybrids , 2014, Materials.

[11]  W. G. Lawson,et al.  Effect of pressure and constraint on the apparent electric strength of polythene , 1965 .

[12]  A. Pye,et al.  Thermoplastic cable insulation comprising a blend of isotactic polypropylene and a propylene-ethylene copolymer , 2015, IEEE Transactions on Dielectrics and Electrical Insulation.

[13]  Alun S. Vaughan,et al.  On the effects of morphology and molecular composition on the electrical strength of polyethylene blends , 2000 .

[14]  Seongwoo Gwon,et al.  Combined Effects of Set Retarders and Polymer Powder on the Properties of Calcium Sulfoaluminate Blended Cement Systems , 2018, Materials.

[15]  C. Green,et al.  Recyclable power cable comprising a blend of slow-crystallized polyethylenes , 2013, IEEE Transactions on Dielectrics and Electrical Insulation.

[16]  Jinghui Gao,et al.  Temperature dependence of crystalline structure and DC performance in LLDPE/HDPE blending material , 2019, IEEE Transactions on Dielectrics and Electrical Insulation.

[17]  R. A. Pethrick,et al.  Electrical degradation and breakdown in polymers , 1993 .

[18]  DC dielectric properties of thermo-plastic polyolefin materials , 2016, 2016 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP).

[19]  Jinghui Gao,et al.  Treeing phenomenon of thermoplastic polyethylene blends for recyclable cable insulation materials , 2017 .

[20]  W. G. Chadband.  Electrical Degradation and Breakdown in Polymers , 1992 .

[21]  P. Hedvig.  Electrical properties of polymers , 1977, Digest of Literature on Dielectrics Volume 42 1978.

[22]  Alun S. Vaughan,et al.  Structure–property relationships in polyethylene blends: the effect of morphology on electrical breakdown strength , 1997 .

[23]  S. Kolesov,et al.  The Influence of Morphology on the Electric Strength of Polymer Insulation , 1980, IEEE Transactions on Electrical Insulation.

[24]  J. Viana,et al.  Extensibility of the Inter-Lamellar Amorphous Layer and the Mechanical Behaviour of Polyethylene , 2006 .

[25]  M. Arrieta,et al.  On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications , 2017, Materials.

[26]  Chen Guanghui,et al.  Dielectric behaviors of recyclable thermo-plastic polyolefin blends for extruded cables , 2015, 2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials (ICPADM).

[27]  Chen Guanghui,et al.  The mechanical properties of recyclable cable insulation materials based on thermo-plastic polyolefin blends , 2015, 2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials (ICPADM).

[28]  B. Dang,et al.  Large improvement in trap level and space charge distribution of polypropylene by enhancing the crystalline − amorphous interface effect in blends , 2016 .