Multi-objective stability control algorithm of heavy tractor semi-trailer based on differential braking

Rollover and jack-knifing of tractor semi-trailer are serious threats for vehicle safety, and accordingly active safety technologies have been widely used to reduce or prevent the occurrence of such accidents. However, currently tractor semi-trailer stability control is generally only a single hazardous condition (rollover or jack-knifing) control, it is difficult to ensure the vehicle comprehensive stability of various dangerous conditions. The main objective of this study is to introduce a multi-objective stability control algorithm which can improve the vehicle stability of a tractor semi-trailer by using differential braking. A vehicle controller is designed to minimize the likelihood of rollover and jack-knifing. First a linear vehicle model of tractor semi-trailer is constructed. Then an optimal yaw control for tractor using differential braking is applied to minimize the yaw rate and lateral acceleration deviation of tractor, as well as the hitch articulation angle of tractor semi-trailer, so as to improve the vehicle stability. Second a braking scheme and variable structure control with sliding mode control are introduced in order to achieve the best braking effect. Last Fishhook maneuver is introduced to the active safety simulation and the active control system effect verification. The simulation results show that multi-objective stability control algorithm of semi-trailer could improve the vehicle stability significantly during the transient maneuvers. The proposed multi-objective stability control algorithm is effective to prevent the vehicle rollover and jackknifing.

[1]  Manfred Frimberger,et al.  Influences of Parameters at Vehicle Rollover , 2000 .

[2]  László Palkovics,et al.  Roll-over prevention system for commercial vehicles - additional sensorless function of the electronic brake system , 1999 .

[3]  M. Bouteldja,et al.  Prediction and Detection of Jackknifing Problems for Tractor Semi-Trailer , 2006, 2006 IEEE Vehicle Power and Propulsion Conference.

[4]  Masayoshi Tomizuka,et al.  Steering and independent braking control for tractor-semitrailer vehicles in automated highway systems , 1995, Proceedings of 1995 34th IEEE Conference on Decision and Control.

[5]  David Cebon,et al.  Improving roll stability of articulated heavy vehicles using active semi-trailer steering , 2008 .

[6]  Kyongsu Yi,et al.  Design of a rollover index-based vehicle stability control scheme , 2007 .

[7]  Huei Peng,et al.  Rollover Warning for Articulated Heavy Vehicles Based on a Time-to-Rollover Metric , 2005 .

[8]  Subhash Rakheja,et al.  Detection of Dynamic Roll Instability of Heavy Vehicles for Open-Loop Rollover Control , 1997 .

[9]  R. Ervin,et al.  Two active systems for enhancing dynamic stability in heavy truck operations: final report , 1998 .

[10]  W. J. Kang,et al.  Modified Johnson-Cook model for vehicle body crashworthiness simulation , 1999 .

[11]  Ashley L. Dunn.  Jackknife stability of articulated tractor semitrailer vehicles with high-output brakes and jackknife detection on low coefficient surfaces , 2003 .

[12]  H. Yu,et al.  Heavy duty vehicle rollover detection and active roll control , 2008 .

[13]  David Cebon,et al.  Design and implementation of an active roll control system for heavy vehicles , 2002 .