Evaluation of inverse dynamics of hexarot-based centrifugal simulators

Dynamic modeling is necessary for design, optimization, simulation and control of mechanisms. This paper presents the evaluation of the inverse dynamics model which has recently been developed based on the Newton–Euler approach for a hexarot manipulator. The evaluation is performed under SimMechanics environment. By comparing the results of the analytical and SimMechanics models, it is found that the both the models are accurate and reliable.

[1]  Mahmood Karimi,et al.  Modified Transpose Effective Jacobian Law for Control of Underactuated Manipulators , 2010, Adv. Robotics.

[2]  K. Srinivasan,et al.  Kinematic and dynamic analysis of Stewart platform-based machine tool structures , 2003, Robotica.

[3]  Zhijiang Du,et al.  High efficient inverse dynamic calculation approach for a haptic device with pantograph parallel platform , 2009 .

[4]  Feng Gao,et al.  Inverse dynamics of the 6-dof out-parallel manipulator by means of the principle of virtual work , 2009, Robotica.

[5]  Chao Chen,et al.  Inverse dynamic modelling of a three-legged six-degree-of-freedom parallel mechanism , 2017 .

[6]  S. Staicu,et al.  A novel dynamic modelling approach for parallel mechanisms analysis , 2008 .

[7]  Xin-Jun Liu,et al.  Inverse dynamics of the HALF parallel manipulator with revolute actuators , 2007 .

[8]  M. Abedinnasab,et al.  Analysis of a 6-DOF redundantly actuated 4-legged parallel mechanism , 2009 .

[9]  Mehran Mahboubkhah,et al.  Forced Vibration Analysis of Milling Machine's Hexapod Table under Machining Forces , 2014 .

[10]  Mohammad Reza Chalak Qazani,et al.  Kinematic analysis and workspace determination of hexarot-a novel 6-DOF parallel manipulator with a rotation-symmetric arm system , 2015, Robotica.

[11]  Heidar Ali Talebi,et al.  A robust adaptive hybrid force/position control scheme of two planar manipulators handling an unknown object interacting with an environment , 2012, J. Syst. Control. Eng..

[12]  A. Ghanbari,et al.  Kinematic Analysis for Hybrid 2-(6-UPU) Manipulator Using Wavelet Neural Network , 2014 .

[13]  S. Ali A. Moosavian,et al.  Multiple Aspect Grasp performance index for cooperative object manipulation tasks , 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[14]  Shaowen Fu,et al.  Comments on “A Newton–Euler formulation for the inverse dynamics of the Stewart platform manipulator” by B. Dasgupta and T.S. Mruthyunjaya [Mech. Mach. Theory 33 (1998) 1135–1152] , 2007 .

[15]  Siamak Pedrammehr,et al.  A study on motion of machine tools’ hexapod table on freeform surfaces with circular interpolation , 2014 .

[16]  Du Lei,et al.  Control System Design and Simulation of an Aerial Three-Axis ISP System Based on SimMechanics , 2011, 2011 Third International Conference on Measuring Technology and Mechatronics Automation.

[17]  M. Mahboubkhah,et al.  Improved dynamic equations for the generally configured Stewart platform manipulator , 2012 .

[18]  Ganwen Zeng,et al.  An overview of robot force control , 1997, Robotica.

[19]  Bhaskar Dasgupta,et al.  Erratum to “A Newton — Euler formulation for the inverse dynamics of the Stewart platform manipulator” [Mechanism and Machine Theory 33 (8) 1135–1152] , 2000 .

[20]  Mehran Mahboubkhah,et al.  A study on vibration of Stewart platform-based machine tool table , 2013 .

[21]  Bhaskar Dasgupta,et al.  Closed-Form Dynamic Equations of the General Stewart Platform through the Newton–Euler Approach , 1998 .

[22]  Saeid Nahavandi,et al.  Mathematical modelling of linear motion error for Hexarot parallel manipulators , 2016 .

[23]  Mehran Mahboubkhah,et al.  Natural frequencies and mode shapes for vibrations of machine tools' hexapod table , 2011 .

[24]  Bhaskar Dasgupta,et al.  A Newton-Euler Formulation for the Inverse Dynamics of the Stewart Platform Manipulator , 1998 .

[25]  Mir Mohammad Ettefagh,et al.  An experimental study on motion error of hexarot parallel manipulator , 2014 .

[26]  Karol Miller,et al.  Optimal Design and Modeling of Spatial Parallel Manipulators , 2004, Int. J. Robotics Res..

[27]  Mohammad Javad Nategh,et al.  The effects of joint clearance on the kinematic error of the hexapod tables , 2017, 2017 5th RSI International Conference on Robotics and Mechatronics (ICRoM).

[28]  Bhaskar Dasgupta,et al.  Erratum to “Closed-form dynamic equations of the general Stewart platform through the Newton — Euler approach” [Mechanism and Machine Theory 33 (7) 993–1012]☆ , 2000 .

[29]  Frank L. Lewis,et al.  Dynamic analysis and control of a stewart platform manipulator , 1993, J. Field Robotics.

[30]  Saeid Nahavandi,et al.  Dynamic analysis of Hexarot: axis-symmetric parallel manipulator , 2017, Robotica.

[31]  Siamak Pedrammehr,et al.  An Investigation on the Motion Error of Machine Tools’ Hexapod Table , 2018 .

[32]  M. Mahboubkhah,et al.  An improved solution to the inverse dynamics of the general Stewart platform , 2011, 2011 IEEE International Conference on Mechatronics.

[33]  S. Ali A. Moosavian,et al.  Cooperative object manipulation with contact impact using multiple impedance control , 2010 .

[34]  Hassan Zohoor,et al.  Comments to the: “Closed-form dynamic equations of the general Stewart platform through the Newton–Euler approach” and “A Newton–Euler formulation for the inverse dynamics of the Stewart platform manipulator” , 2008 .

[35]  Saeid Nahavandi,et al.  Design methodology for a hexarot-based centrifugal high-G simulator , 2017, 2017 IEEE International Conference on Systems, Man, and Cybernetics (SMC).

[36]  S. Ali A. Moosavian,et al.  Dynamics and Cooperative Object Manipulation Control of Suspended Mobile Manipulators , 2010, J. Intell. Robotic Syst..

[37]  Saeid Nahavandi,et al.  Closed-form dynamics of a hexarot parallel manipulator by means of the principle of virtual work , 2018 .