论文信息 - Design and Analysis of Gating and Risering System for Casting of Ball Valves

Design and Analysis of Gating and Risering System for Casting of Ball Valves

Casting is suitable economical manufacturing process for various components. It may experience different defects such as crack, porosity, hot tear etc. because of poor design of gating and risering system. The objective of the project is to optimize gating and risering systems of ball valve component based on CAD and simulation technology with the goal of improving casting quality and increasing casting yield. In the work presented, CAD model of ball valve has been developed and simulation has been carried out using ProCAST. ProCAST results are compared with the experimental results for validation. Risering and gating parameters are modified to get better yield. It is observed that with new gating and risering system casting yield is improved by 8% and porosity is decreased by 1%.

N. Ghetiya | S. Joshi | P. Panchal

[1] Abdel Magid Hamouda,et al. Numerical simulation of casting solidification in permanent metallic molds , 2006 .

[2] Uday A. Dabade,et al. Casting Defect Analysis using Design of Experiments (DoE) and Computer Aided Casting Simulation Technique , 2013 .

[3] P. Rao,et al. Modeling and Simulation of Solidification in Alloy Steel Sand Castings , 2011 .

[4] Guo Zhanli,et al. Simulation of Shrinkage Defect Formation in Exhaust Manifold Castings , 2010 .

[5] Durgesh Joshi,et al. Feedability Analysis and Optimisation Driven by Casting Simulation , 2007 .

[6] M. Marqués. CAE Techniques for Casting Optimization , 2002 .