The potential for using geopolymer concrete in the UK

Geopolymers are a novel class of inorganic polymers, which have the potential to replace Portland cement in a number of different applications. Geopolymers can utilise a higher level of industrial by-products than Portland cement blends and numerous studies have concluded geopolymer concretes have significantly lower embodied carbon dioxide than Portland-cement-based concretes. This paper examines the potential for the use of geopolymer binders as a Portland cement replacement in the UK. The quantities of material required, the major sources of these materials, the environmental implications and the barriers to implementation are discussed.

[1]  Peter Walker,et al.  Compressive strength of extruded unfired clay masonry units , 2009 .

[2]  J. Deventer,et al.  Geopolymer technology: the current state of the art , 2007 .

[3]  Jay G. Sanjayan,et al.  Effect of elevated temperatures on geopolymer paste, mortar and concrete , 2010 .

[4]  Matthias Fawer,et al.  Life cycle inventories for the production of sodium silicates , 1999 .

[5]  Brick clay 1 Mineral Planning Factsheet , .

[6]  E. Gartner.  Industrially interesting approaches to “low-CO2” cements ☆ , 2004 .

[7]  R. Cloots,et al.  (Micro)-structural comparison between geopolymers, alkali-activated slag cement and Portland cement , 2006 .

[8]  J. Davidovits.  Geopolymer chemistry and applications , 2008 .

[9]  John L. Provis,et al.  The role of particle technology in developing sustainable construction materials , 2010 .

[10]  J. Ideker,et al.  Advances in alternative cementitious binders , 2011 .

[11]  P. Van den Heede,et al.  Environmental impact and life cycle assessment (LCA) of traditional and ‘green’ concretes: Literature review and theoretical calculations , 2012 .

[12]  G. Corder,et al.  Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement , 2011 .

[13]  J. Deventer,et al.  Understanding the relationship between geopolymer composition, microstructure and mechanical properties , 2005 .

[14]  Muhammed Basheer.  Concrete: an introduction , 2009 .

[15]  J. Davidovits.  Geopolymers : inorganic polymeric new materials , 1991 .

[16]  R. H. Atkinson.  Recent advances in the applied chemistry of the rare metals. Jubilee memorial lecture , 1940 .

[17]  O. Lindqvist,et al.  Evaluation of the leaching characteristics of wood ash and the influence of ash agglomeration , 1999 .

[18]  Y. Pontikes,et al.  Geopolymerisation potential of metallurgical slags and plasma treated APC residues , 2011 .

[19]  John L. Provis,et al.  Chemical Research and Climate Change as Drivers in the Commercial Adoption of Alkali Activated Materials , 2010 .

[20]  N. Roussel,et al.  An environmental evaluation of geopolymer based concrete production: reviewing current research trends , 2011 .

[21]  P. Eng.  CO2 emissions from fuel combustion: highlights , 2009 .

[22]  Richard S. J. Tol,et al.  Scenarios of carbon dioxide emissions from aviation , 2010 .