Operation stability analysis of district heating substation from the control perspective

Since the heating substation plays a key role in transferring the thermal energy from the primary network to the secondary network and controlling the heat output of district heating system to meet the thermal load, high operation performance of heating substation is essential for energy conservation, cost saving and emission reduction. The dynamic operation stability of heating substation is a very important dynamic characteristic of heating substation and largely affects the operation efficiency of district heating system. The operation instability of heating substation mainly manifest as flow rate and pressure oscillations, which will deteriorate the network hydraulic condition, break the network thermal balance, reduce the consumer comfort and increase the energy cost of the pumping system. Since heating substations will easily operate unstably under some conditions, this paper presents a theoretical method to analyze the stability and retune the feedback controller for operation stability of heating substation. Mathematical model of the plate heat exchanger was established and the feedback control theory was adopted to study the operation stability of heating substation. Based on the mathematical model and feedback control theory, a stability criterion was proposed for analyzing the operation stability of district heating substation effectively. The dynamic model of plate heat exchanger was validated with measured data. Simulation results show that controller tuned at certain operating condition can’t ensure operation stability of heating substation, when operating condition varies in large range. The stability analysis method proposed in this paper can be applied to analyzing the operation stability and tuning the controller of heating substation to enhance the operation stability.

[1]  Markku Lampinen,et al.  Study of a district heating system with the ring network technology and plate heat exchangers in a consumer substation , 2014 .

[2]  Salam K. Al-Dawery,et al.  Dynamic modeling and control of plate heat exchanger , 2012 .

[3]  Refrigerating.  2012 ASHRAE handbook : heating, ventilating, and air-conditioning systems and equipment , 2012 .

[4]  Andreas Kugi,et al.  Model based control of compact heat exchangers independent of the heat transfer behavior , 2014 .

[5]  Sven Werner,et al.  Achieving low return temperatures from district heating substations , 2014 .

[6]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[7]  Ian Postlethwaite,et al.  Multivariable Feedback Control: Analysis and Design , 1996 .

[8]  János Abonyi,et al.  Controller tuning of district heating networks using experiment design techniques , 2010 .

[9]  Kimmo Yliniemi,et al.  Fault detection in district heating substations , 2005 .

[10]  Jerker Delsing,et al.  Improved district heating substation efficiency with a new control strategy , 2010 .

[11]  Svend Svendsen,et al.  Numerical modelling and experimental measurements for a low-temperature district heating substation for instantaneous preparation of DHW with respect to service pipes , 2012 .

[12]  Andreas Kugi,et al.  Accurate low-order dynamic model of a compact plate heat exchanger , 2013 .

[13]  Jerker Delsing,et al.  Experimental evaluation of radiator control based on primary supply temperature for district heating substations , 2011 .

[14]  Jakob Stoustrup,et al.  An analytical solution for stability-performance dilemma of hydronic radiators , 2013 .

[15]  Huan Zhang,et al.  Accurate model reduction and control of radiator for performance enhancement of room heating system , 2017 .

[16]  Svend Svendsen,et al.  Energy-efficient and cost-effective in-house substations bypass for improving thermal and DHW (domestic hot water) comfort in bathrooms in low-energy buildings supplied by low-temperature district heating , 2014 .

[17]  Gene F. Franklin,et al.  Feedback Control of Dynamic Systems , 1986 .