Further investigation of the structure and properties of austenitic stainless steel after plasma nitriding
暂无分享，去创建一个
[1] C. V. Cooper,et al. Conditions for the formation of a martensitic single-phase compound layer in ion-nitrided 316L austenitic stainless steel , 1998 .
[2] J. D’Haen,et al. A method for determination of the effective diffusion coefficient and sputtering rate during plasma diffusion treatment , 1998 .
[3] A. Weisheit,et al. Plasma immersion ion implantation of stainless steel: austenitic stainless steel in comparison to austenitic-ferritic stainless steel , 1996 .
[4] K. Short,et al. Nitriding of austenitic stainless steel by plasma immersion ion implantation , 1995 .
[5] K. Rie,et al. Structure and properties of plasma-nitrided stainless steel , 1995 .
[6] Orhan Öztürk,et al. Phase and composition depth distribution analyses of low energy, high flux N implanted stainless steel , 1995 .
[7] G. Collins,et al. Microstructure, corrosion and tribological behaviour of plasma immersion ion-implanted austenitic stainless steel , 1993 .
[8] J. Takada,et al. Plasma nitriding of Fe-18Cr-9Ni in the range of 723–823 K , 1991 .
[9] C. Leroy,et al. Properties of sputtered stainless steel-nitrogen coatings and structural analogy with low temperature plasma nitrided layers of austenitic steels , 1991 .
[10] A. Molinari,et al. Phase transformations of a nitrogen-implanted austenitic stainless steel (X10 CrNiTi 18-9)☆ , 1989 .
[11] K. Ichii. Structure of the Ion-Nitrided Layer of 18–8 Stainless Steel* , 1986 .