Benchmarking Analysis of Energy Efficiency Indicators in Paper Mill

Paper mills consume a large amount of energy, which is an important factor restricting their sustainable development. Benchmarking is a critical method for discovering the energy-savings potential of mills. To address problems such as the absence of indicators for energy efficiency benchmarking, the influence of different basis weights on energy efficiency levels and on the estimation of energy-saving potential, this paper makes use of production line-based and process-based benchmarking in coated paperboard production. The indicator system is constructed to collect data and quantify the energy efficiency. K-means clustering is used to classify the basis weight and energy efficiency data for seven months and obtain the benchmark values. The results showed that the specific energy consumption (SEC) decreased with the increase in basis weight. An analysis of production line-based benchmarking for a paper mill in China indicated that energy efficiency reached the level of 5.92 to 6.94 GJ/t, which was 10.8 to 23.91% lower compared with the European Union best available energy level (7.78 GJ/t) and 6.28 to 24.6% higher compared with the energy consumption of American paper products integrated production units (5.57 GJ/t). These energy-saving measures should be taken into account in order to raise the energy efficiency in paper mills.

[1]  Ernst Worrell,et al.  ENERGY EFFICIENCY OPPORTUNITIES IN THE U.S. PULP AND PAPER INDUSTRY , 2008 .

[2]  Lynn Price,et al.  Assessment of emerging energy-efficiency technologies for the pulp and paper industry: a technical review , 2016 .

[3]  A Merve Kocabas,et al.  Adoption of European Union's IPPC Directive to a textile mill: analysis of water and energy consumption. , 2009, Journal of environmental management.

[4]  Silvia Fiore,et al.  Evaluation of the energy efficiency of a large wastewater treatment plant in Italy , 2016 .

[5]  Andrea Toffolo,et al.  Integrating the processes of a Kraft pulp and paper mill and its supply chain , 2015 .

[6]  Martin Trépanier,et al.  Strategic simulation of the energy management in a Kraft mill , 2010 .

[7]  Ernst Worrell,et al.  Benchmarking energy use in the paper industry: a benchmarking study on process unit level , 2013 .

[8]  Bo Wu,et al.  Energy information integration based on EMS in paper mill , 2012 .

[9]  Štefan Barcík,et al.  Factors Affecting the Consumption of Energy during the Milling of Thermally Modified and Unmodified Beech Wood , 2015 .

[10]  Kong Lingbo,et al.  Energy System Diagnosis and Analysis with“Three-Links” Models in Pulp and Paper Mill , 2010 .

[11]  J. MacQueen Some methods for classification and analysis of multivariate observations , 1967 .

[12]  Patrick E. Phelan,et al.  Energy and exergy utilizations of the U.S. manufacturing sector , 2010 .

[13]  Naveen Bhutani Case Study for Performance Assessment and Benefit Estimation in Paper Machines by Data Mining , 2015 .

[14]  Bruno Lapillonne,et al.  Cross-country comparison on energy efficiency indicators : the on-going European effort towards a common methodology , 1997 .

[15]  Lihong Peng,et al.  Analysis of energy efficiency and carbon dioxide reduction in the Chinese pulp and paper industry , 2015 .

[16]  Enrique Mateos-Espejel,et al.  Base case process development for energy efficiency improvement, application to a Kraft pulping mill. Part II: Benchmarking analysis , 2011 .

[17]  Marco Taisch,et al.  Energy management in production: A novel method to develop key performance indicators for improving energy efficiency , 2015 .

[18]  Olcay Kincay,et al.  An assessment of a pulp and paper mill through energy and exergy analyses , 2013 .

[19]  Luciana Savulescu,et al.  Direct heat transfer considerations for improving energy efficiency in pulp and paper Kraft mills , 2008 .

[20]  J. C. Van Gorp Maximizing energy savings with enterprise energy management systems , 2004 .

[21]  Liu Yu,et al.  Application of modified bentonite granulated electrodes for advanced treatment of pulp and paper mill wastewater in three-dimensional electrode system , 2016 .

[22]  A. Kaya,et al.  Energy management technology in pulp, paper, and allied industries , 1983, Autom..

[23]  Pekka Ruohonen,et al.  Analysis of alternative secondary heat uses to improve energy efficiency-case: a Finnish mechanical pulp and paper mill. , 2010 .

[24]  S. Laestadius The relevance of science and technology indicators: the case of pulp and paper , 1998 .