Micro-abrasion–corrosion of cast CoCrMo—Effects of micron and sub-micron sized abrasives

[1]  E. Rabinowicz,et al.  Effect of abrasive particle size on wear , 1965 .

[2]  J. C. Hamer,et al.  Paper VIII(ii) Deformation mechanisms and stresses created by 3rd body debris contacts and their effects on rolling bearing fatigue , 1987 .

[3]  R. S. Sayles,et al.  Debris Damage in Rolling Bearings and Its Effects on Fatigue Life , 1988 .

[4]  I. Hutchings.  Tribology: Friction and Wear of Engineering Materials , 1992 .

[5]  John A. Williams,et al.  Abrasive wear in lubricated contacts , 1992 .

[6]  M. Semlitsch,et al.  Clinical wear behaviour of ultra-high molecular weight polyethylene cups paired with metal and ceramic ball heads in comparison to metal-on-metal pairings of hip joint replacements , 1997, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[7]  Gwidon Stachowiak,et al.  Particle Angularity and Its Relationship to Abrasive and Erosive Wear , 2000 .

[8]  K. Gahr.  Wear by hard particles , 1998 .

[9]  J. Medley,et al.  Temporomandibular Joint Arthroplasty Using Metal-on-Metal and Acrylic-on-Metal Configurations : Wear In Laboratory Tests and In Retrievals. , 1999, Surgical technology international.

[10]  I. Hutchings,et al.  Transitions between two-body and three-body abrasive wear: influence of test conditions in the microscale abrasive wear test , 1999 .

[11]  A. Wang,et al.  Residual Abrasive Material from Surface Grinding of Metal-Metal Hip Implants: A Source of Third-Body Wear? , 1999 .

[12]  D. Dowson,et al.  Direct experimental evidence of lubrication in a metal-on-metal total hip replacement tested in a joint simulator , 2000 .

[13]  D. Zukor,et al.  Effects of digestion protocols on the isolation and characterization of metal-metal wear particles. I. Analysis of particle size and shape. , 2001, Journal of biomedical materials research.

[14]  A. Mersmann.  Crystallization Technology Handbook , 2001 .

[15]  M. Wimmer,et al.  The acting wear mechanisms on metal-on-metal hip joint bearings: in-vitro results , 2001 .

[16]  I. Clarke,et al.  The wear pattern in metal-on-metal hip prostheses. , 2001, Journal of biomedical materials research.

[17]  J. Fisher,et al.  An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads , 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[18]  G. Reinisch,et al.  Retrieval study of uncemented metal-metal hip prostheses revised for early loosening. , 2003, Biomaterials.

[19]  M. Wimmer,et al.  Tribochemical reaction on metal-on-metal hip joint bearings A comparison between in-vitro and in-vivo results , 2003 .

[20]  T. Band,et al.  METAL ON METAL BEARING WEAR OF FEMORAL HIP ORTHOPAEDIC IMPLANTS PRODUCED IN COBALT CHROMIUM MOLYBDENUM ALLOY , 2004 .

[21]  D. Landolt,et al.  Third body effects and material fluxes in tribocorrosion systems involving a sliding contact , 2004 .

[22]  Z. Jin,et al.  Prediction of scratch resistance of cobalt chromium alloy bearing surface, articulating against ultra-high molecular weight polyethylene, due to third-body wear particles , 2004, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[23]  G. Stachowiak,et al.  Wear mechanisms in ball-cratering tests with large abrasive particles , 2004 .

[24]  Ian M. Hutchings,et al.  Results from an interlaboratory exercise to validate the micro-scale abrasion test , 2005 .

[25]  R. Wood,et al.  Micro-abrasion-corrosion of a CoCrMo alloy in simulated artificial hip joint environments , 2005 .

[26]  D. Howie,et al.  The long-term wear of retrieved McKee-Farrar metal-on-metal total hip prostheses. , 2005, The Journal of arthroplasty.

[27]  Z. Jin,et al.  RUNNING-IN WEAR AND LUBRICATION OF METAL-ON-METAL HIP IMPLANTS , 2006 .

[28]  D. Dowson,et al.  Tribocorrosion in implants- : assessing high carbon and low carbon Co-Cr-Mo alloys by in situ electrochemical measurements , 2006 .

[29]  P. Williams,et al.  Metal-on-metal hip simulator study of increased wear particle surface area due to ‘severe’ patient activity , 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[30]  R. Wood,et al.  Synergistic effects of micro-abrasion-corrosion of UNS S30403, S31603 and S32760 stainless steels , 2007 .

[31]  R. Wood,et al.  Effects of proteins and pH on tribocorrosion performance of cast CoCrMo – a combined electrochemical and tribological study , 2008 .

[32]  W. M. Rainforth,et al.  Microabrasion-corrosion of cast CoCrMo alloy in simulated body fluids , 2009 .